SDM845 uses v2.4.0 of the TSENS IP block but the get_temp() function
appears to be identical across v2.x.y in code seen so far. We use the
generic get_temp() function.
Signed-off-by: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
---
Documentation/devicetree/bindings/thermal/qcom-tsens.txt | 2 ++
drivers/thermal/qcom/tsens-v2.c | 6 +++++-
drivers/thermal/qcom/tsens.c | 6 ++++++
drivers/thermal/qcom/tsens.h | 5 ++++-
4 files changed, 17 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
index 06195e8..075182e 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
@@ -5,6 +5,8 @@ Required properties:
- "qcom,msm8916-tsens" : For 8916 Family of SoCs
- "qcom,msm8974-tsens" : For 8974 Family of SoCs
- "qcom,msm8996-tsens" : For 8996 Family of SoCs
+ - "qcom,tsens-v2.4.0" : For SDM845 Family of SoCs
+ - "qcom,tsens-v2" : Generic fallback binding for any Soc using 2.x.y version of the tsens IP
- reg: Address range of the thermal registers
- #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description.
diff --git a/drivers/thermal/qcom/tsens-v2.c b/drivers/thermal/qcom/tsens-v2.c
index 2eca7ff..1871945 100644
--- a/drivers/thermal/qcom/tsens-v2.c
+++ b/drivers/thermal/qcom/tsens-v2.c
@@ -69,8 +69,12 @@ static const struct tsens_ops ops_generic_v2 = {
.get_temp = get_temp_tsens_v2,
};
+const struct tsens_data data_tsens_v2 = {
+ .ops = &ops_generic_v2,
+};
+
+/* Kept around for backward compatibility with old msm8996.dtsi */
const struct tsens_data data_8996 = {
.num_sensors = 13,
.ops = &ops_generic_v2,
};
-
diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
index 3440166c..992ed17 100644
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -72,6 +72,12 @@ static const struct of_device_id tsens_table[] = {
}, {
.compatible = "qcom,msm8996-tsens",
.data = &data_8996,
+ }, {
+ .compatible = "qcom,tsens-v2.4.0",
+ .data = &data_tsens_v2,
+ }, {
+ .compatible = "qcom,tsens-v2",
+ .data = &data_tsens_v2,
},
{}
};
diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h
index dc56e1e..69212cb 100644
--- a/drivers/thermal/qcom/tsens.h
+++ b/drivers/thermal/qcom/tsens.h
@@ -87,6 +87,9 @@ void compute_intercept_slope(struct tsens_device *, u32 *, u32 *, u32);
int init_common(struct tsens_device *);
int get_temp_common(struct tsens_device *, int, int *);
-extern const struct tsens_data data_8916, data_8974, data_8960, data_8996;
+/* TSENS v1 targets */
+extern const struct tsens_data data_8916, data_8974, data_8960;
+/* TSENS v2 targets */
+extern const struct tsens_data data_8996, data_tsens_v2;
#endif /* __QCOM_TSENS_H__ */
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
