[PATCH 3/3] arm64: dts: qcom: pm8998: Add thermal zone

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add pm8998 thermal zone based on the examples in the spmi-temp-alarm
bindings.

Note: devices with the pm8998 need to have a 'thermal-zones' node (which
may be empty) with a label 'thermal_zones'.

Signed-off-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/pm8998.dtsi | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/pm8998.dtsi b/arch/arm64/boot/dts/qcom/pm8998.dtsi
index f2d39074ed74..d85ceb4f976b 100644
--- a/arch/arm64/boot/dts/qcom/pm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8998.dtsi
@@ -3,6 +3,7 @@
 
 #include <dt-bindings/spmi/spmi.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/thermal/thermal.h>
 
 &spmi_bus {
 	pm8998_lsid0: pmic@0 {
@@ -59,3 +60,30 @@
 		#size-cells = <0>;
 	};
 };
+
+&thermal_zones {
+	pm8998 {
+		polling-delay-passive = <250>;
+		polling-delay = <1000>;
+
+		thermal-sensors = <&pm8998_temp>;
+
+		trips {
+			passive {
+				temperature = <1050000>;
+				hysteresis = <2000>;
+				type = "passive";
+			};
+			alert {
+				temperature = <125000>;
+				hysteresis = <2000>;
+				type = "hot";
+			};
+			crit {
+				temperature = <145000>;
+				hysteresis = <2000>;
+				type = "critical";
+			};
+		};
+	};
+};
-- 
2.18.0.rc2.346.g013aa6912e-goog

--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux