2018-06-20 16:27 GMT+09:00 Abhishek Sahu <absahu@xxxxxxxxxxxxxx>:
> commit 2c8f8afa7f92 ("mtd: nand: add generic helpers to check,
> match, maximize ECC settings") provides generic helpers which
> drivers can use for setting up ECC parameters.
>
> Since same board can have different ECC strength nand chips so
> following is the logic for setting up ECC strength and ECC step
> size, which can be used by most of the drivers.
>
> 1. If both ECC step size and ECC strength are already set
> (usually by DT) then just check whether this setting
> is supported by NAND controller.
> 2. If NAND_ECC_MAXIMIZE is set, then select maximum ECC strength
> supported by NAND controller.
> 3. Otherwise, try to match the ECC step size and ECC strength closest
> to the chip's requirement. If available OOB size can't fit the chip
> requirement then select maximum ECC strength which can be fit with
> available OOB size.
>
> This patch introduces nand_ecc_choose_conf function which calls the
> required helper functions for the above logic. The drivers can use
> this single function instead of calling the 3 helper functions
> individually.
>
> CC: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
You can replace the CC with my
Reviewed-by: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
Thanks.
> Signed-off-by: Abhishek Sahu <absahu@xxxxxxxxxxxxxx>
> ---
> * Changes from v3:
> 1. call nand_maximize_ecc() 2 times to make code more clear.
>
> * Changes from v2:
>
> 1. Renamed function to nand_ecc_choose_conf.
> 2. Minor code reorganization to remove warning and 2 function calls
> for nand_maximize_ecc.
>
> * Changes from v1:
> NEW PATCH
>
> drivers/mtd/nand/raw/nand_base.c | 33 +++++++++++++++++++++++++++++++++
> include/linux/mtd/rawnand.h | 3 +++
> 2 files changed, 36 insertions(+)
>
> diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
> index 10c4f991..c64e3fc 100644
> --- a/drivers/mtd/nand/raw/nand_base.c
> +++ b/drivers/mtd/nand/raw/nand_base.c
> @@ -6287,6 +6287,39 @@ int nand_maximize_ecc(struct nand_chip *chip,
> }
> EXPORT_SYMBOL_GPL(nand_maximize_ecc);
>
> +/**
> + * nand_ecc_choose_conf - Set the ECC strength and ECC step size
> + * @chip: nand chip info structure
> + * @caps: ECC engine caps info structure
> + * @oobavail: OOB size that the ECC engine can use
> + *
> + * Choose the ECC configuration according to following logic
> + *
> + * 1. If both ECC step size and ECC strength are already set (usually by DT)
> + * then check if it is supported by this controller.
> + * 2. If NAND_ECC_MAXIMIZE is set, then select maximum ECC strength.
> + * 3. Otherwise, try to match the ECC step size and ECC strength closest
> + * to the chip's requirement. If available OOB size can't fit the chip
> + * requirement then fallback to the maximum ECC step size and ECC strength.
> + *
> + * On success, the chosen ECC settings are set.
> + */
> +int nand_ecc_choose_conf(struct nand_chip *chip,
> + const struct nand_ecc_caps *caps, int oobavail)
> +{
> + if (chip->ecc.size && chip->ecc.strength)
> + return nand_check_ecc_caps(chip, caps, oobavail);
> +
> + if (chip->ecc.options & NAND_ECC_MAXIMIZE)
> + return nand_maximize_ecc(chip, caps, oobavail);
> +
> + if (!nand_match_ecc_req(chip, caps, oobavail))
> + return 0;
> +
> + return nand_maximize_ecc(chip, caps, oobavail);
> +}
> +EXPORT_SYMBOL_GPL(nand_ecc_choose_conf);
> +
> /*
> * Check if the chip configuration meet the datasheet requirements.
>
> diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h
> index 3e8ec3b..03a0061 100644
> --- a/include/linux/mtd/rawnand.h
> +++ b/include/linux/mtd/rawnand.h
> @@ -1650,6 +1650,9 @@ int nand_match_ecc_req(struct nand_chip *chip,
> int nand_maximize_ecc(struct nand_chip *chip,
> const struct nand_ecc_caps *caps, int oobavail);
>
> +int nand_ecc_choose_conf(struct nand_chip *chip,
> + const struct nand_ecc_caps *caps, int oobavail);
> +
> /* Default write_oob implementation */
> int nand_write_oob_std(struct mtd_info *mtd, struct nand_chip *chip, int page);
>
> --
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc.
> is a member of Code Aurora Forum, hosted by The Linux Foundation
>
>
> ______________________________________________________
> Linux MTD discussion mailing list
> http://lists.infradead.org/mailman/listinfo/linux-mtd/
--
Best Regards
Masahiro Yamada
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
