Re: [PATCH RFC 6/7] serial: Add device tree bindings for GENI based UART Controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Dec 27, 2017 at 09:27:25AM -0700, Karthikeyan Ramasubramanian wrote:
> Add device tree binding support for GENI based UART Controller in the
> QUP Wrapper.
> 
> Signed-off-by: Karthikeyan Ramasubramanian <kramasub@xxxxxxxxxxxxxx>
> Signed-off-by: Girish Mahadevan <girishm@xxxxxxxxxxxxxx>
> ---
>  .../devicetree/bindings/serial/qcom,geni-uart.txt  | 31 ++++++++++++++++++++++
>  1 file changed, 31 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/serial/qcom,geni-uart.txt
> 
> diff --git a/Documentation/devicetree/bindings/serial/qcom,geni-uart.txt b/Documentation/devicetree/bindings/serial/qcom,geni-uart.txt
> new file mode 100644
> index 0000000..e60ec6a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/serial/qcom,geni-uart.txt
> @@ -0,0 +1,31 @@
> +Qualcomm Technologies Inc. GENI based Serial UART Controller driver
> +
> +This serial UART driver supports console use-cases. This driver is meant
> +only for Generic Interface (GENI) based Qualcomm Universal Peripheral (QUP)
> +cores and isn't backwards compatible.
> +
> +Required properties:
> +- compatible: should contain "qcom,geni-uart, qcom,geni-console"

Is console different programming model or just how you are using the 
h/w? for the latter, drop it as we have stdout-path to select a console.

> +- reg: Should contain UART register location and length.
> +- interrupts: Should contain UART core interrupts.
> +- clocks: clocks needed for UART, includes the core and AHB clock.
> +- pinctrl-names/pinctrl-0/1: The GPIOs assigned to this core. The names
> +  Should be "active" and "sleep" for the pin confuguration when core is active
> +  or when entering sleep state.
> +- qcom,wrapper-core: Wrapper QUP core containing this UART controller.
> +
> +Example:
> +qup_uart11: qcom,qup_uart@0xa88000 {

Use generic node names and no '0x':

serial@a88000

> +	compatible = "qcom,geni-uart";
> +	reg = <0xa88000 0x7000>;
> +	reg-names = "se_phys";
> +	clock-names = "se-clk", "m-ahb", "s-ahb";

Not documented.

> +	clocks = <&clock_gcc GCC_QUPV3_WRAP0_S0_CLK>,
> +		<&clock_gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
> +		<&clock_gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
> +	pinctrl-names = "default", "sleep";
> +	pinctrl-0 = <&qup_1_uart_3_active>;
> +	pinctrl-1 = <&qup_1_uart_3_sleep>;
> +	interrupts = <0 355 0>;
> +	qcom,wrapper-core = <&qup_0>;
> +};
> -- 
> Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux