Add device tree binding support for GENI based UART Controller in the
QUP Wrapper.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@xxxxxxxxxxxxxx>
Signed-off-by: Girish Mahadevan <girishm@xxxxxxxxxxxxxx>
---
.../devicetree/bindings/serial/qcom,geni-uart.txt | 31 ++++++++++++++++++++++
1 file changed, 31 insertions(+)
create mode 100644 Documentation/devicetree/bindings/serial/qcom,geni-uart.txt
diff --git a/Documentation/devicetree/bindings/serial/qcom,geni-uart.txt b/Documentation/devicetree/bindings/serial/qcom,geni-uart.txt
new file mode 100644
index 0000000..e60ec6a
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/qcom,geni-uart.txt
@@ -0,0 +1,31 @@
+Qualcomm Technologies Inc. GENI based Serial UART Controller driver
+
+This serial UART driver supports console use-cases. This driver is meant
+only for Generic Interface (GENI) based Qualcomm Universal Peripheral (QUP)
+cores and isn't backwards compatible.
+
+Required properties:
+- compatible: should contain "qcom,geni-uart, qcom,geni-console"
+- reg: Should contain UART register location and length.
+- interrupts: Should contain UART core interrupts.
+- clocks: clocks needed for UART, includes the core and AHB clock.
+- pinctrl-names/pinctrl-0/1: The GPIOs assigned to this core. The names
+ Should be "active" and "sleep" for the pin confuguration when core is active
+ or when entering sleep state.
+- qcom,wrapper-core: Wrapper QUP core containing this UART controller.
+
+Example:
+qup_uart11: qcom,qup_uart@0xa88000 {
+ compatible = "qcom,geni-uart";
+ reg = <0xa88000 0x7000>;
+ reg-names = "se_phys";
+ clock-names = "se-clk", "m-ahb", "s-ahb";
+ clocks = <&clock_gcc GCC_QUPV3_WRAP0_S0_CLK>,
+ <&clock_gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+ <&clock_gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&qup_1_uart_3_active>;
+ pinctrl-1 = <&qup_1_uart_3_sleep>;
+ interrupts = <0 355 0>;
+ qcom,wrapper-core = <&qup_0>;
+};
--
Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
