On 12/08/17 11:53, Hans Verkuil wrote:
> On 10/08/17 10:49, Archit Taneja wrote:
>>
>>
>> On 07/30/2017 06:37 PM, Hans Verkuil wrote:
>>> From: Hans Verkuil <hans.verkuil@xxxxxxxxx>
>>>
>>> Add support for HDMI CEC to the drm adv7511/adv7533 drivers.
>>>
>>> The CEC registers that we need to use are identical for both drivers,
>>> but they appear at different offsets in the register map.
>>
>> Thanks for the patch. Some minor comments below.
>>
>>>
>>> Signed-off-by: Hans Verkuil <hans.verkuil@xxxxxxxxx>
>>> ---
>>> drivers/gpu/drm/bridge/adv7511/Kconfig | 8 +
>>> drivers/gpu/drm/bridge/adv7511/Makefile | 1 +
>>> drivers/gpu/drm/bridge/adv7511/adv7511.h | 45 +++-
>>> drivers/gpu/drm/bridge/adv7511/adv7511_cec.c | 314 +++++++++++++++++++++++++++
>>> drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 152 +++++++++++--
>>> drivers/gpu/drm/bridge/adv7511/adv7533.c | 30 +--
>>> 6 files changed, 500 insertions(+), 50 deletions(-)
>>> create mode 100644 drivers/gpu/drm/bridge/adv7511/adv7511_cec.c
>>>
<snip>
>>> +static bool adv7533_cec_register_volatile(struct device *dev, unsigned int reg)
>>> +{
>>> + switch (reg) {
>>> + case ADV7511_REG_CEC_RX_FRAME_HDR + ADV7533_REG_CEC_OFFSET:
>>> + case ADV7511_REG_CEC_RX_FRAME_DATA0 + ADV7533_REG_CEC_OFFSET...
>>> + ADV7511_REG_CEC_RX_FRAME_DATA0 + ADV7533_REG_CEC_OFFSET + 14:
>>> + case ADV7511_REG_CEC_RX_FRAME_LEN + ADV7533_REG_CEC_OFFSET:
>>> + case ADV7511_REG_CEC_RX_BUFFERS + ADV7533_REG_CEC_OFFSET:
>>> + case ADV7511_REG_CEC_TX_LOW_DRV_CNT + ADV7533_REG_CEC_OFFSET:
>>> + return true;
>>> + }
>>> +
>>> + return false;
>>> +}
>>> +
>>> +static const struct regmap_config adv7533_cec_regmap_config = {
>>> + .reg_bits = 8,
>>> + .val_bits = 8,
>>> +
>>> + .max_register = 0xff,
>>> + .cache_type = REGCACHE_RBTREE,
>>> + .volatile_reg = adv7533_cec_register_volatile,
>>> +};
>>> +
>>> +static bool adv7511_cec_register_volatile(struct device *dev, unsigned int reg)
>>> +{
>>
>> Maybe we could combine the two register_volatile() funcs and the remap_config structs
>> for adv7511 and adv7533 by passing (reg + offset) to switch?
>
> How? How would I know in the volatile function whether it is an adv7511 or adv7533?
> Is there an easy way to go from the struct device to a struct adv7511?
Never mind, I figured it out.
Implemented.
Regards,
Hans
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
