Adding patches to enable qusb2 and qmp phy controller for PCIe and USB, and to enable USB 2.0 and 3.0 support on msm8996 chipset. Enabling the support for apq8096-db820c board. Patch series dependencies: 1) Glink-rpm device tree support for 8996: https://www.spinics.net/lists/linux-arm-msm/msg29046.html 2) Dt binding fix for pipe clock source: a. https://patchwork.kernel.org/patch/9870865/ b. https://patchwork.kernel.org/patch/9870871/ 3) pmi8994 gpio support: https://lkml.org/lkml/2017/7/28/346 Tested the series on dragonboard db820c target. Vivek Gautam (4): arm64: dts: msm8996: Add device node for qcom qusb2 phy arm64: dts: msm8996: Add device node for qcom qmp-phy for usb arm64: dts: msm8996: Add device node for qcom qmp-phy for pcie arm64: dts: msm8996: Add device node for qcom,dwc3 .../boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi | 24 +++ arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 50 +++++ arch/arm64/boot/dts/qcom/msm8996.dtsi | 203 +++++++++++++++++++++ 3 files changed, 277 insertions(+) -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
