Re: [PATCH v2 3/5] clk: qcom: gdsc: Add support to control associated clks

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 07/28/2017 04:32 AM, Stephen Boyd wrote:
> On 07/20, Rajendra Nayak wrote:
>> @@ -166,6 +169,29 @@ static inline void gdsc_assert_clamp_io(struct gdsc *sc)
>>  			   GMEM_CLAMP_IO_MASK, 1);
>>  }
>>  
>> +static inline int gdsc_clk_enable(struct gdsc *sc)
>> +{
>> +	int i, ret;
>> +
>> +	for (i = 0; i < sc->clk_count; i++) {
>> +		ret = clk_prepare_enable(sc->clks[i]);
>> +		if (ret) {
>> +			for (i--; i >= 0; i--)
> 
> while (--i >= 0) ?
> 
>> +				clk_disable_unprepare(sc->clks[i]);
>> +			return ret;
>> +		}
>> +	}
>> +	return 0;
>> +}
>> +
>> +static inline void gdsc_clk_disable(struct gdsc *sc)
>> +{
>> +	int i;
>> +
>> +	for (i = 0; i < sc->clk_count; i++)
> 
> Could also be the same while loop.
> 
>> +		clk_disable_unprepare(sc->clks[i]);
>> +}
>> +
>>  static int gdsc_enable(struct generic_pm_domain *domain)
>>  {
>>  	struct gdsc *sc = domain_to_gdsc(domain);
>> @@ -193,6 +219,10 @@ static int gdsc_enable(struct generic_pm_domain *domain)
>>  	 */
>>  	udelay(1);
>>  
>> +	ret = gdsc_clk_enable(sc);
>> +	if (ret)
>> +		return ret;
>> +
>>  	/* Turn on HW trigger mode if supported */
>>  	if (sc->flags & HW_CTRL) {
>>  		ret = gdsc_hwctrl(sc, true);
>> @@ -241,6 +271,8 @@ static int gdsc_disable(struct generic_pm_domain *domain)
>>  			return ret;
>>  	}
>>  
>> +	gdsc_clk_disable(sc);
> 
> Can we call sleeping APIs (i.e. prepare/unprepare) from within
> the power domains? I thought that didn't work generically because
> someone could set their runtime PM configuration to be atomic
> context friendly. Is there some way we can block that from
> happening if we hook up a power domain that is no longer safe to
> call from atomic context?

hmm, I don't see a way to do that. Perhaps we could prepare/unprepare
these as part of the pm_domain attach/detach to a device and then
only enable/disable them as part of the gdsc_enable/disable?

> 
>> +
>>  	if (sc->pwrsts & PWRSTS_OFF)
>>  		gdsc_clear_mem_on(sc);
>>  
>> @@ -254,7 +286,27 @@ static int gdsc_disable(struct generic_pm_domain *domain)
>>  	return 0;
>>  }
>>  
>> -static int gdsc_init(struct gdsc *sc)
>> +static inline int gdsc_clk_get(struct device *dev, struct gdsc *sc)
>> +{
>> +	if (sc->clk_count) {
> 
> We could drop this check. kmalloc with size zero is OK as long as
> we don't use the returned pointer value. We shouldn't use it
> assuming the for loop is maintained.
> 
>> +		int i;
>> +
>> +		sc->clks = devm_kcalloc(dev, sc->clk_count, sizeof(*sc->clks),
>> +					GFP_KERNEL);
>> +		if (!sc->clks)
>> +			return -ENOMEM;
>> +
>> +		for (i = 0; i < sc->clk_count; i++) {
>> +			sc->clks[i] = devm_clk_hw_get_clk(dev, sc->clk_hws[i],
>> +							  NULL);
>> +			if (IS_ERR(sc->clks[i]))
>> +				return PTR_ERR(sc->clks[i]);
>> +		}
>> +	}
>> +	return 0;
>> +}
>> +
>> +static int gdsc_init(struct device *dev, struct gdsc *sc)
>>  {
>>  	u32 mask, val;
>>  	int on, ret;
>> @@ -284,6 +336,10 @@ static int gdsc_init(struct gdsc *sc)
>>  	if (on < 0)
>>  		return on;
>>  
>> +	ret = gdsc_clk_get(dev, sc);
>> +	if (ret)
>> +		return ret;
>> +
> 
> This concerns me if we do probe defer on orphan clks. We may get
> into some situation where the gdsc is setup by a clk driver that
> is trying to probe before some parent clk has registered for the
> clks we're "getting" here. For example, this could easily happen
> if we insert XO into the tree at the top and everything defers.
> 
> I suppose this is not a problem because in this case we don't
> have any clk here that could be orphaned even if RPM clks are
> inserted into the clk tree for XO? I mean to say that we won't
> get into a probe defer due to orphan clk loop. I'm always afraid
> someone will make hardware that send a clk from one controller to
> another and then back again (we did that with pcie) and then
> we'll be unable to get out of the defer loop because we'll be
> deferred on orphan status.

Yes, we would probably run into these issues with probe defer for
orphan clks. One way to handle it could be to decouple the probing
of the clocks and powerdomain parts of the controller. Like the clock
driver can probe and then register a dummy device for powerdomains
(like is done for tsens on 8960) so it could probe independently?

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
hosted by The Linux Foundation
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux