Re: [PATCH v4 4/7] phy: qcom-qmp: Add support for IPQ8074

Vivek Gautam <vivek.gautam@xxxxxxxxxxxxxx> · Wed, 26 Jul 2017 21:01:36 +0530

On 07/21/2017 05:06 PM, Varadarajan Narayanan wrote:
Add definitions required to enable QMP phy support for IPQ8074.

Signed-off-by: smuthayy <smuthayy@xxxxxxxxxxxxxx>
Signed-off-by: Varadarajan Narayanan <varada@xxxxxxxxxxxxxx>
---
  drivers/phy/qualcomm/phy-qcom-qmp.c | 124 ++++++++++++++++++++++++++++++++++++
  1 file changed, 124 insertions(+)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index b046866..ec277fd 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -59,6 +59,7 @@
  #define QSERDES_COM_PLL_RCTRL_MODE1			0x088
  #define QSERDES_COM_PLL_CCTRL_MODE0			0x090
  #define QSERDES_COM_PLL_CCTRL_MODE1			0x094
+#define QSERDES_COM_BIAS_EN_CTRL_BY_PSM			0x0a8
  #define QSERDES_COM_SYSCLK_EN_SEL			0x0ac
  #define QSERDES_COM_RESETSM_CNTRL			0x0b4
  #define QSERDES_COM_RESTRIM_CTRL			0x0bc
@@ -143,6 +144,11 @@
  #define QPHY_LOCK_DETECT_CONFIG3			0x88
  #define QPHY_PWRUP_RESET_DLY_TIME_AUXCLK		0xa0
  #define QPHY_LP_WAKEUP_DLY_TIME_AUXCLK			0xa4
+#define QPHY_PLL_LOCK_CHK_DLY_TIME_AUXCLK_LSB		0x1A8
+#define QPHY_OSC_DTCT_ACTIONS				0x1AC
+#define QPHY_RX_SIGDET_LVL				0x1D8
+#define QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB		0x1DC
+#define QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB		0x1E0
  
  /* QPHY_SW_RESET bit */
  #define SW_RESET				BIT(0)
@@ -580,6 +586,121 @@ static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val)
  	.mask_pcs_ready		= PHYSTATUS,
  };
  
+static const struct qmp_phy_init_tbl ipq8074_pcie_serdes_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x18),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CLK_ENABLE1, 0x10),
+	QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0xf),
+	QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_EN, 0x1),
+	QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x0),
+	QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER1, 0x1f),
+	QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER2, 0x3f),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x6),
+	QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0xf),
+	QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x0),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x1),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x20),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV, 0xa),
+	QMP_PHY_INIT_CFG(QSERDES_COM_RESETSM_CNTRL, 0x20),
+	QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0xa),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0xa),
+	QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
+	QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x3),
+	QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x55),
+	QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x55),
+	QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x0),
+	QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0xD),
+	QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0xD04),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x33),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x2),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_BUF_ENABLE, 0x1f),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0xb),
+	QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
+	QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x0),
+	QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
+	QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CTRL_BY_PSM, 0x1),
+	QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_CTRL, 0xa),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x1),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x1),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x2),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x0),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0x2f),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x19),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CLK_EP_DIV, 0x19),
+	QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x7),
+};
+
+static const struct qmp_phy_init_tbl ipq8074_pcie_tx_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45),
+	QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x6),
+	QMP_PHY_INIT_CFG(QSERDES_TX_RES_CODE_LANE_OFFSET, 0x2),
+	QMP_PHY_INIT_CFG(QSERDES_TX_RCV_DETECT_LVL_2, 0x12),
+};
+
+static const struct qmp_phy_init_tbl ipq8074_pcie_rx_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_ENABLES, 0x1c),
+	QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x14),
+	QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x1),
+	QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3, 0x0),
+	QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0xdb),
+	QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
+	QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN, 0x4),
+	QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN_HALF, 0x4),
+};
+
+static const struct qmp_phy_init_tbl ipq8074_pcie_pcs_tbl[] = {
+	QMP_PHY_INIT_CFG(QPHY_ENDPOINT_REFCLK_DRIVE, 0x4),
+	QMP_PHY_INIT_CFG(QPHY_OSC_DTCT_ACTIONS, 0x0),
+	QMP_PHY_INIT_CFG(QPHY_PWRUP_RESET_DLY_TIME_AUXCLK, 0x40),
+	QMP_PHY_INIT_CFG(QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB, 0x0),
+	QMP_PHY_INIT_CFG(QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB, 0x40),
+	QMP_PHY_INIT_CFG(QPHY_PLL_LOCK_CHK_DLY_TIME_AUXCLK_LSB, 0x0),
+	QMP_PHY_INIT_CFG(QPHY_LP_WAKEUP_DLY_TIME_AUXCLK, 0x40),
+	QMP_PHY_INIT_CFG_L(QPHY_PLL_LOCK_CHK_DLY_TIME, 0x73),
+	QMP_PHY_INIT_CFG(QPHY_RX_SIGDET_LVL, 0x99),
+	QMP_PHY_INIT_CFG(QPHY_TXDEEMPH_M6DB_V0, 0x15),
+	QMP_PHY_INIT_CFG(QPHY_TXDEEMPH_M3P5DB_V0, 0xe),
+	QMP_PHY_INIT_CFG_L(QPHY_SW_RESET, 0x0),
+	QMP_PHY_INIT_CFG_L(QPHY_START_CTRL, 0x3),
+};
+
+/* list of resets */
+static const char * const ipq8074_pciephy_reset_l[] = {
+	"phy", "phy_phy",
+};

Just a nit in this patch.
Can you arrange these data inline to how they are currently in the driver?
So please place the init tables along with other tables, and the reset and
other driver data also along side other such definitions.
Thanks


Regards
vivek

+
+static const struct qmp_phy_cfg ipq8074_pciephy_cfg = {
+	.type			= PHY_TYPE_PCIE,
+	.nlanes			= 1,
+
+	.serdes_tbl		= ipq8074_pcie_serdes_tbl,
+	.serdes_tbl_num		= ARRAY_SIZE(ipq8074_pcie_serdes_tbl),
+	.tx_tbl			= ipq8074_pcie_tx_tbl,
+	.tx_tbl_num		= ARRAY_SIZE(ipq8074_pcie_tx_tbl),
+	.rx_tbl			= ipq8074_pcie_rx_tbl,
+	.rx_tbl_num		= ARRAY_SIZE(ipq8074_pcie_rx_tbl),
+	.pcs_tbl		= ipq8074_pcie_pcs_tbl,
+	.pcs_tbl_num		= ARRAY_SIZE(ipq8074_pcie_pcs_tbl),
+	.clk_list		= NULL,
+	.num_clks		= 0,
+	.reset_list		= ipq8074_pciephy_reset_l,
+	.num_resets		= ARRAY_SIZE(ipq8074_pciephy_reset_l),
+	.vreg_list		= NULL,
+	.num_vregs		= 0,
+	.regs			= pciephy_regs_layout,
+
+	.start_ctrl		= SERDES_START | PCS_START,
+	.pwrdn_ctrl		= SW_PWRDN | REFCLK_DRV_DSBL,
+	.mask_pcs_ready		= PHYSTATUS,
+
+	.has_phy_com_ctrl	= false,
+	.has_lane_rst		= false,
+	.has_pwrdn_delay	= true,
+	.pwrdn_delay_min	= 995,		/* us */
+	.pwrdn_delay_max	= 1005,		/* us */
+};
+
  static void qcom_qmp_phy_configure(void __iomem *base,
  				   const unsigned int *regs,
  				   const struct qmp_phy_init_tbl tbl[],
@@ -1042,6 +1163,9 @@ int qcom_qmp_phy_create(struct device *dev, struct device_node *np, int id)
  	}, {
  		.compatible = "qcom,msm8996-qmp-usb3-phy",
  		.data = &msm8996_usb3phy_cfg,
+	}, {
+		.compatible = "qcom,ipq8074-qmp-pcie-phy",
+		.data = &ipq8074_pciephy_cfg,
  	},
  	{ },
  };

--
The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html






