On Mon 24 Jul 23:09 PDT 2017, Vivek Gautam wrote: > Hi Bjorn, > > > On Tue, Jul 25, 2017 at 11:17 AM, Bjorn Andersson > <bjorn.andersson@xxxxxxxxxx> wrote: > > From: Vivek Gautam <vivek.gautam@xxxxxxxxxxxxxx> > > > > Signed-off-by: Vivek Gautam <vivek.gautam@xxxxxxxxxxxxxx> > > Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx> > > --- > > arch/arm64/boot/dts/qcom/msm8996.dtsi | 11 +++++++++++ > > 1 file changed, 11 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi > > index 395666dcce1b..d0865d2f731e 100644 > > --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi > > +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi > > @@ -496,6 +496,17 @@ > > status = "disabled"; > > }; > > > > + qfprom: qfprom@74000 { > > + compatible = "qcom,qfprom"; > > + reg = <0x00074000 0x8ff>; > > + #address-cells = <1>; > > + #size-cells = <1>; > > + qusb2p_hstx_trim: hstx_trim@24e { > > + reg = <0x24e 0x2>; > > + bits = <5 4>; > > + }; > > There's one more part to it which will be used by the secondary > USB2 controller. > I was hoping to add this patch along with the USB device tree patches. > Let me know if you are not using this patch for anything now, i can > submit it along with the usb series. > I omitted this due to the rpmcc dependency. But I must have looked at the wrong node, as there is no such dependency. So this should be replaced by the full 0387312d9f35 ("arm64: dts: msm8996: Add device node for qcom qusb2 phy"), which has a commit message as well. Thanks for spotting my mistake. Regards, Bjorn -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html