[PATCH 0/2] Qualcomm GLINK SSR support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This adds the common Qualcomm helpers to tie in subsystem restart notifications
with the ADSP and Modem PILs and then adds a driver for the "glink_ssr" channel
to propagate these notifications.

This is needed on GLINK RPM enabled platforms to have the RPM reset the state
of the communication channels to the peripherals, allowing them to be restarted
without the RPM crashing due stale FIFO data.

Bjorn Andersson (2):
  remoteproc: qcom: Add support for SSR notifications
  soc: qcom: GLINK SSR notifier

 drivers/remoteproc/qcom_adsp_pil.c    |   6 ++
 drivers/remoteproc/qcom_common.c      |  71 +++++++++++++++
 drivers/remoteproc/qcom_common.h      |  10 +++
 drivers/remoteproc/qcom_q6v5_pil.c    |   3 +
 drivers/soc/qcom/Kconfig              |   9 ++
 drivers/soc/qcom/Makefile             |   1 +
 drivers/soc/qcom/glink_ssr.c          | 164 ++++++++++++++++++++++++++++++++++
 include/linux/remoteproc/qcom_rproc.h |  22 +++++
 8 files changed, 286 insertions(+)
 create mode 100644 drivers/soc/qcom/glink_ssr.c
 create mode 100644 include/linux/remoteproc/qcom_rproc.h

-- 
2.12.0

--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux