The phy outputs a clock that will act as the parent for the phy's pipe clock. Add the name of this clock to the lane's DT node. Acked-by: Rob Herring <robh@xxxxxxxxxx> Signed-off-by: Varadarajan Narayanan <varada@xxxxxxxxxxxxxx> --- Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt | 3 +++ 1 file changed, 3 insertions(+) diff --git a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt index e11c563..5d7a51f 100644 --- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt +++ b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt @@ -60,6 +60,8 @@ Required properties for child node: one for each entry in clock-names. - clock-names: Must contain following for pcie and usb qmp phys: "pipe<lane-number>" for pipe clock specific to each lane. + - clock-output-names: Name of the phy clock that will be the parent for + the above pipe clock. - resets: a list of phandles and reset controller specifier pairs, one for each entry in reset-names. @@ -96,6 +98,7 @@ Example: clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; clock-names = "pipe0"; + clock-output-names = "pcie_0_pipe_clk_src"; resets = <&gcc GCC_PCIE_0_PHY_BCR>; reset-names = "lane0"; }; -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
