Hi Todor,
On Mon, Jul 17, 2017 at 01:33:30PM +0300, Todor Tomov wrote:
> Add DT binding document for Qualcomm Camera subsystem driver.
>
> CC: Rob Herring <robh+dt@xxxxxxxxxx>
> CC: devicetree@xxxxxxxxxxxxxxx
> Signed-off-by: Todor Tomov <todor.tomov@xxxxxxxxxx>
> ---
> .../devicetree/bindings/media/qcom,camss.txt | 191 +++++++++++++++++++++
> 1 file changed, 191 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/qcom,camss.txt
>
> diff --git a/Documentation/devicetree/bindings/media/qcom,camss.txt b/Documentation/devicetree/bindings/media/qcom,camss.txt
> new file mode 100644
> index 0000000..f698498
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/qcom,camss.txt
> @@ -0,0 +1,191 @@
> +Qualcomm Camera Subsystem
> +
> +* Properties
> +
> +- compatible:
> + Usage: required
> + Value type: <stringlist>
> + Definition: Should contain:
> + - "qcom,msm8916-camss"
> +- reg:
> + Usage: required
> + Value type: <prop-encoded-array>
> + Definition: Register ranges as listed in the reg-names property.
> +- reg-names:
> + Usage: required
> + Value type: <stringlist>
> + Definition: Should contain the following entries:
> + - "csiphy0"
> + - "csiphy0_clk_mux"
> + - "csiphy1"
> + - "csiphy1_clk_mux"
> + - "csid0"
> + - "csid1"
> + - "ispif"
> + - "csi_clk_mux"
> + - "vfe0"
> +- interrupts:
> + Usage: required
> + Value type: <prop-encoded-array>
> + Definition: Interrupts as listed in the interrupt-names property.
> +- interrupt-names:
> + Usage: required
> + Value type: <stringlist>
> + Definition: Should contain the following entries:
> + - "csiphy0"
> + - "csiphy1"
> + - "csid0"
> + - "csid1"
> + - "ispif"
> + - "vfe0"
> +- power-domains:
> + Usage: required
> + Value type: <prop-encoded-array>
> + Definition: A phandle and power domain specifier pairs to the
> + power domain which is responsible for collapsing
> + and restoring power to the peripheral.
> +- clocks:
> + Usage: required
> + Value type: <prop-encoded-array>
> + Definition: A list of phandle and clock specifier pairs as listed
> + in clock-names property.
> +- clock-names:
> + Usage: required
> + Value type: <stringlist>
> + Definition: Should contain the following entries:
> + - "camss_top_ahb"
> + - "ispif_ahb"
> + - "csiphy0_timer"
> + - "csiphy1_timer"
> + - "csi0_ahb"
> + - "csi0"
> + - "csi0_phy"
> + - "csi0_pix"
> + - "csi0_rdi"
> + - "csi1_ahb"
> + - "csi1"
> + - "csi1_phy"
> + - "csi1_pix"
> + - "csi1_rdi"
> + - "camss_ahb"
> + - "camss_vfe_vfe"
> + - "camss_csi_vfe"
> + - "iface"
> + - "bus"
> +- vdda-supply:
> + Usage: required
> + Value type: <phandle>
> + Definition: A phandle to voltage supply for CSI2.
> +- iommus:
> + Usage: required
> + Value type: <prop-encoded-array>
> + Definition: A list of phandle and IOMMU specifier pairs.
> +
> +* Nodes
> +
> +- ports:
> + Usage: required
> + Definition: As described in video-interfaces.txt in same directory.
> + Properties:
> + - reg:
> + Usage: required
> + Value type: <u32>
> + Definition: Selects CSI2 PHY interface - PHY0 or PHY1.
> + Endpoint node properties:
> + - clock-lanes:
> + Usage: required
> + Value type: <u32>
> + Definition: The clock lane.
> + - data-lanes:
> + Usage: required
> + Value type: <prop-encoded-array>
> + Definition: An array of data lanes.
> +
> +* An Example
> +
> + camss: camss@1b00000 {
> + compatible = "qcom,msm8916-camss";
> + reg = <0x1b0ac00 0x200>,
> + <0x1b00030 0x4>,
> + <0x1b0b000 0x200>,
> + <0x1b00038 0x4>,
> + <0x1b08000 0x100>,
> + <0x1b08400 0x100>,
> + <0x1b0a000 0x500>,
> + <0x1b00020 0x10>,
> + <0x1b10000 0x1000>;
> + reg-names = "csiphy0",
> + "csiphy0_clk_mux",
> + "csiphy1",
> + "csiphy1_clk_mux",
> + "csid0",
> + "csid1",
> + "ispif",
> + "csi_clk_mux",
> + "vfe0";
> + interrupts = <GIC_SPI 78 0>,
> + <GIC_SPI 79 0>,
> + <GIC_SPI 51 0>,
> + <GIC_SPI 52 0>,
> + <GIC_SPI 55 0>,
> + <GIC_SPI 57 0>;
> + interrupt-names = "csiphy0",
> + "csiphy1",
> + "csid0",
> + "csid1",
> + "ispif",
> + "vfe0";
> + power-domains = <&gcc VFE_GDSC>;
> + clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>,
> + <&gcc GCC_CAMSS_ISPIF_AHB_CLK>,
> + <&gcc GCC_CAMSS_CSI0PHYTIMER_CLK>,
> + <&gcc GCC_CAMSS_CSI1PHYTIMER_CLK>,
> + <&gcc GCC_CAMSS_CSI0_AHB_CLK>,
> + <&gcc GCC_CAMSS_CSI0_CLK>,
> + <&gcc GCC_CAMSS_CSI0PHY_CLK>,
> + <&gcc GCC_CAMSS_CSI0PIX_CLK>,
> + <&gcc GCC_CAMSS_CSI0RDI_CLK>,
> + <&gcc GCC_CAMSS_CSI1_AHB_CLK>,
> + <&gcc GCC_CAMSS_CSI1_CLK>,
> + <&gcc GCC_CAMSS_CSI1PHY_CLK>,
> + <&gcc GCC_CAMSS_CSI1PIX_CLK>,
> + <&gcc GCC_CAMSS_CSI1RDI_CLK>,
> + <&gcc GCC_CAMSS_AHB_CLK>,
> + <&gcc GCC_CAMSS_VFE0_CLK>,
> + <&gcc GCC_CAMSS_CSI_VFE0_CLK>,
> + <&gcc GCC_CAMSS_VFE_AHB_CLK>,
> + <&gcc GCC_CAMSS_VFE_AXI_CLK>;
> + clock-names = "camss_top_ahb",
> + "ispif_ahb",
> + "csiphy0_timer",
> + "csiphy1_timer",
> + "csi0_ahb",
> + "csi0",
> + "csi0_phy",
> + "csi0_pix",
> + "csi0_rdi",
> + "csi1_ahb",
> + "csi1",
> + "csi1_phy",
> + "csi1_pix",
> + "csi1_rdi",
> + "camss_ahb",
> + "camss_vfe_vfe",
> + "camss_csi_vfe",
> + "iface",
> + "bus";
> + vdda-supply = <&pm8916_l2>;
> + iommus = <&apps_iommu 3>;
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + port@0 {
> + reg = <0>;
> + csiphy0_ep: endpoint {
> + clock-lanes = <1>;
> + data-lanes = <0 2>;
Do you support lane mapping? The values suggest "yes". That's something I
could improve in the documentation: if lane mapping isn't supported, then
the clock lane should be 0 and the data lanes from 1 to n.
Is the split of the lanes between the ports static and specific to the
hardware?
> + remote-endpoint = <&ov5645_ep>;
> + };
> + };
> + };
> + };
--
Regards,
Sakari Ailus
e-mail: sakari.ailus@xxxxxx XMPP: sailus@xxxxxxxxxxxxxx
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
