The NAND controller returns ECC failure during read of completely erased codeword. The NAND controller has hardware functionality to detect erased codeword in case of BCH ECC algorithm. The NAND_ERASED_CW_DETECT_CFG register controls the Erased Codeword/Page detection controller. This register should be reset before every page read by setting and clearing bit 0 of NAND_ERASED_CW_DETECT_CFG. Signed-off-by: Abhishek Sahu <absahu@xxxxxxxxxxxxxx> --- drivers/mtd/nand/qcom_nandc.c | 23 ++++++++++++++++++++++- 1 file changed, 22 insertions(+), 1 deletion(-) diff --git a/drivers/mtd/nand/qcom_nandc.c b/drivers/mtd/nand/qcom_nandc.c index b9e0eec..89f6a89 100644 --- a/drivers/mtd/nand/qcom_nandc.c +++ b/drivers/mtd/nand/qcom_nandc.c @@ -196,6 +196,11 @@ #define NAND_BAM_NWD BIT(1) /* Finish writing in the current sgl and start writing in another sgl */ #define NAND_BAM_NEXT_SGL BIT(2) +/* + * Erased codeword status is being used two times in single transfer so this + * flag will determine the current value of erased codeword status register + */ +#define NAND_ERASED_CW_SET BIT(4) /* * This data type corresponds to the BAM transaction which will be used for all @@ -279,6 +284,8 @@ struct nandc_regs { __le32 read_location2; __le32 read_location3; + __le32 erased_cw_detect_cfg_clr; + __le32 erased_cw_detect_cfg_set; }; /* @@ -815,6 +822,13 @@ static int write_reg_dma(struct qcom_nand_controller *nandc, int first, if (first == NAND_FLASH_CMD) flow_control = true; + if (first == NAND_ERASED_CW_DETECT_CFG) { + if (flags & NAND_ERASED_CW_SET) + vaddr = ®s->erased_cw_detect_cfg_set; + else + vaddr = ®s->erased_cw_detect_cfg_clr; + } + if (first == NAND_EXEC_CMD) flags |= NAND_BAM_NWD; @@ -867,6 +881,9 @@ static void config_nand_page_read(struct qcom_nand_controller *nandc) write_reg_dma(nandc, NAND_ADDR0, 2, 0); write_reg_dma(nandc, NAND_DEV0_CFG0, 3, 0); write_reg_dma(nandc, NAND_EBI2_ECC_BUF_CFG, 1, 0); + write_reg_dma(nandc, NAND_ERASED_CW_DETECT_CFG, 1, 0); + write_reg_dma(nandc, NAND_ERASED_CW_DETECT_CFG, 1, + NAND_ERASED_CW_SET | NAND_BAM_NEXT_SGL); } /* @@ -2268,9 +2285,13 @@ static int qcom_nand_host_setup(struct qcom_nand_host *host) host->clrflashstatus = FS_READY_BSY_N; host->clrreadstatus = 0xc0; + nandc->regs->erased_cw_detect_cfg_clr = + cpu_to_le32(CLR_ERASED_PAGE_DET); + nandc->regs->erased_cw_detect_cfg_set = + cpu_to_le32(SET_ERASED_PAGE_DET); dev_dbg(nandc->dev, - "cfg0 %x cfg1 %x ecc_buf_cfg %x ecc_bch cfg %x cw_size %d cw_data %d strength %d parity_bytes %d steps %d\n", + "cfg0 %x cfg1 %x ecc_buf_cfg %x ecc_bch cfg %x cw_size %d cw_data %d strength %d parity_bytes %d steps %d\n", host->cfg0, host->cfg1, host->ecc_buf_cfg, host->ecc_bch_cfg, host->cw_size, host->cw_data, ecc->strength, ecc->bytes, cwperpage); -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html