On 07/03, Kiran Gunda wrote:
> From: David Collins <collinsd@xxxxxxxxxxxxxx>
>
> Add support for version 5 of the SPMI PMIC arbiter. It utilizes
> different offsets for registers than those found on version 3.
> Also, the procedure to determine if writing and IRQ access is
> allowed for a given PPID changes for version 5.
>
David's sign-off is missing?
> Signed-off-by: Kiran Gunda <kgunda@xxxxxxxxxxxxxx>
> ---
> drivers/spmi/spmi-pmic-arb.c | 233 +++++++++++++++++++++++++++++++++++++++----
> 1 file changed, 214 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/spmi/spmi-pmic-arb.c b/drivers/spmi/spmi-pmic-arb.c
> index 86affb0..bc88c19 100644
> --- a/drivers/spmi/spmi-pmic-arb.c
> +++ b/drivers/spmi/spmi-pmic-arb.c
> @@ -1,5 +1,5 @@
> /*
> - * Copyright (c) 2012-2015, The Linux Foundation. All rights reserved.
> + * Copyright (c) 2012-2017, The Linux Foundation. All rights reserved.
> *
> * This program is free software; you can redistribute it and/or modify
> * it under the terms of the GNU General Public License version 2 and
> @@ -29,6 +29,7 @@
> #define PMIC_ARB_VERSION 0x0000
> #define PMIC_ARB_VERSION_V2_MIN 0x20010000
> #define PMIC_ARB_VERSION_V3_MIN 0x30000000
> +#define PMIC_ARB_VERSION_V5_MIN 0x50000000
> #define PMIC_ARB_INT_EN 0x0004
>
> /* PMIC Arbiter channel registers offsets */
> @@ -39,7 +40,6 @@
> #define PMIC_ARB_WDATA1 0x14
> #define PMIC_ARB_RDATA0 0x18
> #define PMIC_ARB_RDATA1 0x1C
> -#define PMIC_ARB_REG_CHNL(N) (0x800 + 0x4 * (N))
>
> /* Mapping Table */
> #define SPMI_MAPPING_TABLE_REG(N) (0x0B00 + (4 * (N)))
> @@ -52,6 +52,8 @@
> #define SPMI_MAPPING_TABLE_TREE_DEPTH 16 /* Maximum of 16-bits */
> #define PMIC_ARB_MAX_PPID BIT(12) /* PPID is 12bit */
> #define PMIC_ARB_APID_VALID BIT(15)
> +#define PMIC_ARB_CHAN_IS_IRQ_OWNER(reg) ((reg) & BIT(24))
> +#define INVALID (-1)
INVALID_EE? And then define it to be 0xff?
>
> /* Ownership Table */
> #define SPMI_OWNERSHIP_TABLE_REG(N) (0x0700 + (4 * (N)))
> @@ -86,6 +88,15 @@ enum pmic_arb_cmd_op_code {
> PMIC_ARB_OP_ZERO_WRITE = 16,
> };
>
> +/*
> + * PMIC arbiter version 5 uses different register offsets for read/write vs
> + * observer channels.
> + */
> +enum pmic_arb_channel {
> + PMIC_ARB_CHANNEL_RW,
> + PMIC_ARB_CHANNEL_OBS,
> +};
> +
> /* Maximum number of support PMIC peripherals */
> #define PMIC_ARB_MAX_PERIPHS 512
[...]
> @@ -112,7 +123,8 @@ enum pmic_arb_cmd_op_code {
>
> +
> /* v2 offset per ppid and per ee */
> static int pmic_arb_offset_v2(struct spmi_pmic_arb *pmic_arb, u8 sid, u16 addr,
> - u32 *offset)
> + enum pmic_arb_channel ch_type, u32 *offset)
> {
> u16 apid;
> u16 ppid;
> @@ -841,6 +947,34 @@ static int pmic_arb_offset_v2(struct spmi_pmic_arb *pmic_arb, u8 sid, u16 addr,
> return 0;
> }
>
> +/*
> + * v5 offset per ee and per apid for observer channels and per apid for
> + * read/write channels.
> + */
> +static int pmic_arb_offset_v5(struct spmi_pmic_arb *pmic_arb, u8 sid, u16 addr,
> + enum pmic_arb_channel ch_type, u32 *offset)
> +{
> + u16 apid;
> + int rc;
> + u16 ppid = (sid << 8) | (addr >> 8);
> +
> + rc = pmic_arb_ppid_to_apid_v5(pmic_arb, ppid);
> + if (rc < 0)
> + return rc;
> +
> + apid = rc;
> + switch (ch_type) {
> + case PMIC_ARB_CHANNEL_OBS:
> + *offset = 0x10000 * pmic_arb->ee + 0x80 * apid;
> + break;
> + case PMIC_ARB_CHANNEL_RW:
> + *offset = 0x10000 * apid;
> + break;
> + }
> +
> + return 0;
Why doesn't this also return an iomem pointer?
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
