The patch
regulator: qcom-smd: Add PM8994 regulator support
has been applied to the regulator tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From 14a1699225957328e4fb07db7e4751cc9d02ae11 Mon Sep 17 00:00:00 2001
From: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
Date: Wed, 18 Jan 2017 02:46:37 -0800
Subject: [PATCH] regulator: qcom-smd: Add PM8994 regulator support
This patch adds support for the PM8994 regulators found on msm8992,
msm8994 and msm8996 platforms.
Signed-off-by: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
[bjorn: Add DT binding doc and vdd_lvs1_2 supply]
Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
---
.../bindings/regulator/qcom,smd-rpm-regulator.txt | 56 +++++++++++
drivers/regulator/qcom_smd-regulator.c | 102 +++++++++++++++++++++
2 files changed, 158 insertions(+)
diff --git a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt
index 1f8d6f84b657..4e3dfb5b5f16 100644
--- a/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt
@@ -22,6 +22,7 @@ Regulator nodes are identified by their compatible:
"qcom,rpm-pm8841-regulators"
"qcom,rpm-pm8916-regulators"
"qcom,rpm-pm8941-regulators"
+ "qcom,rpm-pm8994-regulators"
"qcom,rpm-pma8084-regulators"
- vdd_s1-supply:
@@ -80,6 +81,56 @@ Regulator nodes are identified by their compatible:
- vdd_s10-supply:
- vdd_s11-supply:
- vdd_s12-supply:
+- vdd_l1-supply:
+- vdd_l2_l26_l28-supply:
+- vdd_l3_l11-supply:
+- vdd_l4_l27_l31-supply:
+- vdd_l5_l7-supply:
+- vdd_l6_l12_l32-supply:
+- vdd_l5_l7-supply:
+- vdd_l8_l16_l30-supply:
+- vdd_l9_l10_l18_l22-supply:
+- vdd_l9_l10_l18_l22-supply:
+- vdd_l3_l11-supply:
+- vdd_l6_l12_l32-supply:
+- vdd_l13_l19_l23_l24-supply:
+- vdd_l14_l15-supply:
+- vdd_l14_l15-supply:
+- vdd_l8_l16_l30-supply:
+- vdd_l17_l29-supply:
+- vdd_l9_l10_l18_l22-supply:
+- vdd_l13_l19_l23_l24-supply:
+- vdd_l20_l21-supply:
+- vdd_l20_l21-supply:
+- vdd_l9_l10_l18_l22-supply:
+- vdd_l13_l19_l23_l24-supply:
+- vdd_l13_l19_l23_l24-supply:
+- vdd_l25-supply:
+- vdd_l2_l26_l28-supply:
+- vdd_l4_l27_l31-supply:
+- vdd_l2_l26_l28-supply:
+- vdd_l17_l29-supply:
+- vdd_l8_l16_l30-supply:
+- vdd_l4_l27_l31-supply:
+- vdd_l6_l12_l32-supply:
+- vdd_lvs1_2-supply:
+ Usage: optional (pm8994 only)
+ Value type: <phandle>
+ Definition: reference to regulator supplying the input pin, as
+ described in the data sheet
+
+- vdd_s1-supply:
+- vdd_s2-supply:
+- vdd_s3-supply:
+- vdd_s4-supply:
+- vdd_s5-supply:
+- vdd_s6-supply:
+- vdd_s7-supply:
+- vdd_s8-supply:
+- vdd_s9-supply:
+- vdd_s10-supply:
+- vdd_s11-supply:
+- vdd_s12-supply:
- vdd_l1_l11-supply:
- vdd_l2_l3_l4_l27-supply:
- vdd_l5_l7-supply:
@@ -113,6 +164,11 @@ pm8941:
l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, lvs1, lvs2,
lvs3, 5vs1, 5vs2
+pm8994:
+ s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, l1, l2, l3, l4, l5,
+ l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, l20,
+ l21, l22, l23, l24, l25, l26, l27, l28, l29, l30, l31, l32, lvs1, lvs2
+
pma8084:
s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, l1, l2, l3, l4, l5,
l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, l20,
diff --git a/drivers/regulator/qcom_smd-regulator.c b/drivers/regulator/qcom_smd-regulator.c
index 8ed46a9a55c8..f35994a2a5be 100644
--- a/drivers/regulator/qcom_smd-regulator.c
+++ b/drivers/regulator/qcom_smd-regulator.c
@@ -305,6 +305,56 @@ static const struct regulator_desc pm8916_buck_hvo_smps = {
.ops = &rpm_smps_ldo_ops,
};
+static const struct regulator_desc pm8994_hfsmps = {
+ .linear_ranges = (struct regulator_linear_range[]) {
+ REGULATOR_LINEAR_RANGE( 375000, 0, 95, 12500),
+ REGULATOR_LINEAR_RANGE(1550000, 96, 158, 25000),
+ },
+ .n_linear_ranges = 2,
+ .n_voltages = 159,
+ .ops = &rpm_smps_ldo_ops,
+};
+
+static const struct regulator_desc pm8994_ftsmps = {
+ .linear_ranges = (struct regulator_linear_range[]) {
+ REGULATOR_LINEAR_RANGE(350000, 0, 199, 5000),
+ REGULATOR_LINEAR_RANGE(700000, 200, 349, 10000),
+ },
+ .n_linear_ranges = 2,
+ .n_voltages = 350,
+ .ops = &rpm_smps_ldo_ops,
+};
+
+static const struct regulator_desc pm8994_nldo = {
+ .linear_ranges = (struct regulator_linear_range[]) {
+ REGULATOR_LINEAR_RANGE(750000, 0, 63, 12500),
+ },
+ .n_linear_ranges = 1,
+ .n_voltages = 64,
+ .ops = &rpm_smps_ldo_ops,
+};
+
+static const struct regulator_desc pm8994_pldo = {
+ .linear_ranges = (struct regulator_linear_range[]) {
+ REGULATOR_LINEAR_RANGE( 750000, 0, 63, 12500),
+ REGULATOR_LINEAR_RANGE(1550000, 64, 126, 25000),
+ REGULATOR_LINEAR_RANGE(3100000, 127, 163, 50000),
+ },
+ .n_linear_ranges = 3,
+ .n_voltages = 164,
+ .ops = &rpm_smps_ldo_ops,
+};
+
+static const struct regulator_desc pm8994_switch = {
+ .ops = &rpm_switch_ops,
+};
+
+static const struct regulator_desc pm8994_lnldo = {
+ .fixed_uV = 1740000,
+ .n_voltages = 1,
+ .ops = &rpm_smps_ldo_ops_fixed,
+};
+
struct rpm_regulator_data {
const char *name;
u32 type;
@@ -443,10 +493,62 @@ static const struct rpm_regulator_data rpm_pma8084_regulators[] = {
{}
};
+static const struct rpm_regulator_data rpm_pm8994_regulators[] = {
+ { "s1", QCOM_SMD_RPM_SMPA, 1, &pm8994_ftsmps, "vdd_s1" },
+ { "s2", QCOM_SMD_RPM_SMPA, 2, &pm8994_ftsmps, "vdd_s2" },
+ { "s3", QCOM_SMD_RPM_SMPA, 3, &pm8994_hfsmps, "vdd_s3" },
+ { "s4", QCOM_SMD_RPM_SMPA, 4, &pm8994_hfsmps, "vdd_s4" },
+ { "s5", QCOM_SMD_RPM_SMPA, 5, &pm8994_hfsmps, "vdd_s5" },
+ { "s6", QCOM_SMD_RPM_SMPA, 6, &pm8994_ftsmps, "vdd_s6" },
+ { "s7", QCOM_SMD_RPM_SMPA, 7, &pm8994_hfsmps, "vdd_s7" },
+ { "s8", QCOM_SMD_RPM_SMPA, 8, &pm8994_ftsmps, "vdd_s8" },
+ { "s9", QCOM_SMD_RPM_SMPA, 9, &pm8994_ftsmps, "vdd_s9" },
+ { "s10", QCOM_SMD_RPM_SMPA, 10, &pm8994_ftsmps, "vdd_s10" },
+ { "s11", QCOM_SMD_RPM_SMPA, 11, &pm8994_ftsmps, "vdd_s11" },
+ { "s12", QCOM_SMD_RPM_SMPA, 12, &pm8994_ftsmps, "vdd_s12" },
+ { "l1", QCOM_SMD_RPM_LDOA, 1, &pm8994_nldo, "vdd_l1" },
+ { "l2", QCOM_SMD_RPM_LDOA, 2, &pm8994_nldo, "vdd_l2_l26_l28" },
+ { "l3", QCOM_SMD_RPM_LDOA, 3, &pm8994_nldo, "vdd_l3_l11" },
+ { "l4", QCOM_SMD_RPM_LDOA, 4, &pm8994_nldo, "vdd_l4_l27_l31" },
+ { "l5", QCOM_SMD_RPM_LDOA, 5, &pm8994_lnldo, "vdd_l5_l7" },
+ { "l6", QCOM_SMD_RPM_LDOA, 6, &pm8994_pldo, "vdd_l6_l12_l32" },
+ { "l7", QCOM_SMD_RPM_LDOA, 7, &pm8994_lnldo, "vdd_l5_l7" },
+ { "l8", QCOM_SMD_RPM_LDOA, 8, &pm8994_pldo, "vdd_l8_l16_l30" },
+ { "l9", QCOM_SMD_RPM_LDOA, 9, &pm8994_pldo, "vdd_l9_l10_l18_l22" },
+ { "l10", QCOM_SMD_RPM_LDOA, 10, &pm8994_pldo, "vdd_l9_l10_l18_l22" },
+ { "l11", QCOM_SMD_RPM_LDOA, 11, &pm8994_nldo, "vdd_l3_l11" },
+ { "l12", QCOM_SMD_RPM_LDOA, 12, &pm8994_pldo, "vdd_l6_l12_l32" },
+ { "l13", QCOM_SMD_RPM_LDOA, 13, &pm8994_pldo, "vdd_l13_l19_l23_l24" },
+ { "l14", QCOM_SMD_RPM_LDOA, 14, &pm8994_pldo, "vdd_l14_l15" },
+ { "l15", QCOM_SMD_RPM_LDOA, 15, &pm8994_pldo, "vdd_l14_l15" },
+ { "l16", QCOM_SMD_RPM_LDOA, 16, &pm8994_pldo, "vdd_l8_l16_l30" },
+ { "l17", QCOM_SMD_RPM_LDOA, 17, &pm8994_pldo, "vdd_l17_l29" },
+ { "l18", QCOM_SMD_RPM_LDOA, 18, &pm8994_pldo, "vdd_l9_l10_l18_l22" },
+ { "l19", QCOM_SMD_RPM_LDOA, 19, &pm8994_pldo, "vdd_l13_l19_l23_l24" },
+ { "l20", QCOM_SMD_RPM_LDOA, 20, &pm8994_pldo, "vdd_l20_l21" },
+ { "l21", QCOM_SMD_RPM_LDOA, 21, &pm8994_pldo, "vdd_l20_l21" },
+ { "l22", QCOM_SMD_RPM_LDOA, 22, &pm8994_pldo, "vdd_l9_l10_l18_l22" },
+ { "l23", QCOM_SMD_RPM_LDOA, 23, &pm8994_pldo, "vdd_l13_l19_l23_l24" },
+ { "l24", QCOM_SMD_RPM_LDOA, 24, &pm8994_pldo, "vdd_l13_l19_l23_l24" },
+ { "l25", QCOM_SMD_RPM_LDOA, 25, &pm8994_pldo, "vdd_l25" },
+ { "l26", QCOM_SMD_RPM_LDOA, 26, &pm8994_nldo, "vdd_l2_l26_l28" },
+ { "l27", QCOM_SMD_RPM_LDOA, 27, &pm8994_nldo, "vdd_l4_l27_l31" },
+ { "l28", QCOM_SMD_RPM_LDOA, 28, &pm8994_nldo, "vdd_l2_l26_l28" },
+ { "l29", QCOM_SMD_RPM_LDOA, 29, &pm8994_pldo, "vdd_l17_l29" },
+ { "l30", QCOM_SMD_RPM_LDOA, 30, &pm8994_pldo, "vdd_l8_l16_l30" },
+ { "l31", QCOM_SMD_RPM_LDOA, 31, &pm8994_nldo, "vdd_l4_l27_l31" },
+ { "l32", QCOM_SMD_RPM_LDOA, 32, &pm8994_pldo, "vdd_l6_l12_l32" },
+ { "lvs1", QCOM_SMD_RPM_VSA, 1, &pm8994_switch, "vdd_lvs1_2" },
+ { "lvs2", QCOM_SMD_RPM_VSA, 2, &pm8994_switch, "vdd_lvs1_2" },
+
+ {}
+};
+
static const struct of_device_id rpm_of_match[] = {
{ .compatible = "qcom,rpm-pm8841-regulators", .data = &rpm_pm8841_regulators },
{ .compatible = "qcom,rpm-pm8916-regulators", .data = &rpm_pm8916_regulators },
{ .compatible = "qcom,rpm-pm8941-regulators", .data = &rpm_pm8941_regulators },
+ { .compatible = "qcom,rpm-pm8994-regulators", .data = &rpm_pm8994_regulators },
{ .compatible = "qcom,rpm-pma8084-regulators", .data = &rpm_pma8084_regulators },
{}
};
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
