Hi, On 11/18/2016 02:28 PM, Sricharan R wrote: > This series adds support for gdscs(powerdomains) that can be configured > in hw controlled mode. So they are turned 'ON' based on needs dynamically, > helping to save power. Also updated the venus video ip's gdsc/clock > data to put them in hw control. > > V2: > Dropped patch#3 [1] as it was concluded that the patch was effectively > masking the fact the clocks were not getting turned on when the gdsc > is put in hwctrl. With some change in sequence from venus core, masking > is not needed and so patch needs to handled in venus driver. Which sequence should be changed in venus driver? > > Fixed a comment in patch#1 to check the return value for gdsc_hwctrl > > [1] https://www.mail-archive.com/linux-kernel@xxxxxxxxxxxxxxx/msg1270922.html > > Rajendra Nayak (1): > clk: qcom: gdsc: Add support for gdscs with HW control > > Sricharan R (1): > clk: qcom: Put venus core0/1 gdscs to hw control mode > > drivers/clk/qcom/gdsc.c | 19 +++++++++++++++++++ > drivers/clk/qcom/gdsc.h | 1 + > drivers/clk/qcom/mmcc-msm8996.c | 2 ++ > 3 files changed, 22 insertions(+) > -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html