On Fri, Oct 21, 2016 at 12:21:47PM -0700, Stephen Boyd wrote:
> On 10/21, Jeremy McNicoll wrote:
> > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> > index 5dd05de..abb366e 100644
> > --- a/arch/arm64/boot/dts/qcom/Makefile
> > +++ b/arch/arm64/boot/dts/qcom/Makefile
> > @@ -1,6 +1,6 @@
> > dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb msm8916-mtp.dtb
> > -dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb
> > -dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb
> > +dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb apq8096-db820c.dtb
> > +dtb-$(CONFIG_ARCH_QCOM) += msm8992-bullhead-rev-101.dtb
>
> One line per dtb please.
>
> >
> > always := $(dtb-y)
> > subdir-y := $(dts-dirs)
> > diff --git a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts
> > new file mode 100644
> > index 0000000..63fa3b0
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts
> > @@ -0,0 +1,42 @@
> > +/* Copyright (c) 2015, LGE Inc. All rights reserved.
> > + * Copyright (c) 2016, The Linux Foundation. All rights reserved.
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2 and
> > + * only version 2 as published by the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + */
> > +
> > +/dts-v1/;
> > +
> > +#include "msm8992.dtsi"
> > +
> > +/ {
> > + model = "LGE MSM8992 BULLHEAD rev-1.01";
> > + compatible = "qcom,msm8992";
> > + /* required for bootloader to select correct board */
> > + qcom,board-id = <0xb64 0>;
> > +};
>
> Why do we end
> > +
> > +/ {
>
> and then restart the root node? Just keep the same node all the
> time please.
>
> > + aliases {
> > + serial0 = &blsp1_uart2;
> > + };
> > +
> > + chosen {
> > + stdout-path = "serial0:115200n8";
> > + };
> > +
> > + soc {
> > + serial@f991e000 {
> > + status = "okay";
> > + pinctrl-names = "default", "sleep";
> > + pinctrl-0 = <&blsp1_uart2_default>;
> > + pinctrl-1 = <&blsp1_uart2_sleep>;
> > + };
> > + };
> > +};
> > diff --git a/arch/arm64/boot/dts/qcom/msm8992.dtsi b/arch/arm64/boot/dts/qcom/msm8992.dtsi
> > new file mode 100644
> > index 0000000..5d69a6b
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/qcom/msm8992.dtsi
> > @@ -0,0 +1,214 @@
> > +/* Copyright (c) 2013-2016, The Linux Foundation. All rights reserved.
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2 and
> > + * only version 2 as published by the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + */
> > +
> > +#include <dt-bindings/interrupt-controller/arm-gic.h>
> > +#include <dt-bindings/clock/qcom,gcc-msm8994.h>
> > +
> > +/ {
> > + model = "Qualcomm Technologies, Inc. MSM 8992";
> > + compatible = "qcom,msm8992";
> > + // msm-id and pmic-id are needed by bootloader for
> > + // selecting correct blob
> > + qcom,msm-id = <251 0>, <252 0>;
> > + qcom,pmic-id = <0x10009 0x1000A 0x0 0x0>;
>
> Can't these just be in the final dts file and not in the dtsi
> file? Technically the pmic pairings are a board choice and not an
> SoC choice so they shouldn't be here. The msm-id properties are
> a little easier to justify, but then I thought we decided to only
> put them in the boards that need them?
>
Board-id and pmic-id are currently in the board file,
(msm8992-bullhead-rev-101.dts) and msm-id is staying in msm8992.dtsi
as its a _REASONABLE_ compromise. Same thing for 8994.
[...snip...]
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
