On Fri, Oct 21, 2016 at 12:21:47PM -0700, Stephen Boyd wrote:
> On 10/21, Jeremy McNicoll wrote:
> > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> > index 5dd05de..abb366e 100644
> > --- a/arch/arm64/boot/dts/qcom/Makefile
> > +++ b/arch/arm64/boot/dts/qcom/Makefile
> > @@ -1,6 +1,6 @@
> > dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb msm8916-mtp.dtb
> > -dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb
> > -dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb
> > +dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb apq8096-db820c.dtb
> > +dtb-$(CONFIG_ARCH_QCOM) += msm8992-bullhead-rev-101.dtb
>
> One line per dtb please.
Bjorn mentioned this as well, its now one entry per line.
>
> >
> > always := $(dtb-y)
> > subdir-y := $(dts-dirs)
> > diff --git a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts
> > new file mode 100644
> > index 0000000..63fa3b0
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts
> > @@ -0,0 +1,42 @@
> > +/* Copyright (c) 2015, LGE Inc. All rights reserved.
> > + * Copyright (c) 2016, The Linux Foundation. All rights reserved.
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2 and
> > + * only version 2 as published by the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + */
> > +
> > +/dts-v1/;
> > +
> > +#include "msm8992.dtsi"
> > +
> > +/ {
> > + model = "LGE MSM8992 BULLHEAD rev-1.01";
> > + compatible = "qcom,msm8992";
> > + /* required for bootloader to select correct board */
> > + qcom,board-id = <0xb64 0>;
> > +};
>
> Why do we end
> > +
> > +/ {
>
> and then restart the root node? Just keep the same node all the
> time please.
>
removed the extra { } 's
> > + aliases {
> > + serial0 = &blsp1_uart2;
> > + };
> > +
> > + chosen {
> > + stdout-path = "serial0:115200n8";
> > + };
> > +
> > + soc {
> > + serial@f991e000 {
> > + status = "okay";
> > + pinctrl-names = "default", "sleep";
> > + pinctrl-0 = <&blsp1_uart2_default>;
> > + pinctrl-1 = <&blsp1_uart2_sleep>;
> > + };
> > + };
> > +};
> > diff --git a/arch/arm64/boot/dts/qcom/msm8992.dtsi b/arch/arm64/boot/dts/qcom/msm8992.dtsi
> > new file mode 100644
> > index 0000000..5d69a6b
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/qcom/msm8992.dtsi
> > @@ -0,0 +1,214 @@
> > +/* Copyright (c) 2013-2016, The Linux Foundation. All rights reserved.
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2 and
> > + * only version 2 as published by the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + */
> > +
> > +#include <dt-bindings/interrupt-controller/arm-gic.h>
> > +#include <dt-bindings/clock/qcom,gcc-msm8994.h>
> > +
> > +/ {
> > + model = "Qualcomm Technologies, Inc. MSM 8992";
> > + compatible = "qcom,msm8992";
> > + // msm-id and pmic-id are needed by bootloader for
> > + // selecting correct blob
> > + qcom,msm-id = <251 0>, <252 0>;
> > + qcom,pmic-id = <0x10009 0x1000A 0x0 0x0>;
>
> Can't these just be in the final dts file and not in the dtsi
> file? Technically the pmic pairings are a board choice and not an
> SoC choice so they shouldn't be here. The msm-id properties are
> a little easier to justify, but then I thought we decided to only
> put them in the boards that need them?
>
> > + interrupt-parent = <&intc>;
> > +
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > +
> > + chosen { };
> > +
> > + cpus {
> > + #address-cells = <2>;
> > + #size-cells = <0>;
> > + cpu-map {
> > + cluster0 {
> > + core0 {
> > + cpu = <&CPU0>;
> > + };
> > + };
> > + };
> > +
> > + CPU0: cpu@0 {
> > + device_type = "cpu";
> > + compatible = "arm,cortex-a53", "arm,armv8";
> > + reg = <0x0 0x0>;
> > + next-level-cache = <&L2_0>;
> > + // The currents(uA) correspond to the frequencies in the
> > + // frequency table.
> > + current = < 18250 //384000 kHZ
> > + 24330 //460800 kHZ
> > + 26920 //600000 kHZ
> > + 34600 //672000 kHz
> > + 38150 //787200 kHZ
> > + 46880 //864000 kHZ
> > + 55940 //960000 kHZ
> > + 81740 //1248000 kHZ
> > + 105870>; //1440000 kHZ
>
> I imagine these aren't used. Please remove them.
>
They are not currently being used. What was their purpose downstream?
> > + L2_0: l2-cache {
> > + compatible = "cache";
> > + cache-level = <2>;
> > + };
> > + };
> > + };
> > +
> > + soc: soc { };
>
> Just put the soc stuff here instead of having an empty node we
> fill later please. That matches other qcom dtsi files.
>
agreed, we were just following what was down in 3.10 downstream.
> > +
> > + memory {
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > +
> > + device_type = "memory";
> > + reg = <0 0 0 0>; // bootloader will update
> > + };
> > +
> > + clocks {
> > + xo_board: xo_board {
> > + compatible = "fixed-clock";
> > + #clock-cells = <0>;
> > + clock-frequency = <19200000>;
> > + };
> > +
> > + sleep_clk: sleep_clk {
> > + compatible = "fixed-clock";
> > + #clock-cells = <0>;
> > + clock-frequency = <32768>;
> > + };
> > + };
> > +};
> > +
> > +&soc {
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + ranges = <0 0 0 0xffffffff>;
> > + compatible = "simple-bus";
> > +
> > + intc: interrupt-controller@f9000000 {
> > + compatible = "qcom,msm-qgic2";
> > + interrupt-controller;
> > + #interrupt-cells = <3>;
> > + reg = <0xf9000000 0x1000>,
> > + <0xf9002000 0x1000>;
> > + };
> > +
> > + timer {
> > + compatible = "arm,armv8-timer";
> > + interrupts = <1 2 0xf08>,
> > + <1 3 0xf08>,
> > + <1 4 0xf08>,
> > + <1 1 0xf08>;
> > + clock-frequency = <19200000>;
>
> Please remove this property.
>
gone
> > + };
>
> This whole node should be outside of soc node.
>
> > +
> > + timer@f9020000 {
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + ranges;
> > + compatible = "arm,armv7-timer-mem";
> > + reg = <0xf9020000 0x1000>;
> > + clock-frequency = <19200000>;
>
> Please remove this property.
>
Followed the format of msm8996.dtsi
> > +
> > + frame@f9021000 {
> > + frame-number = <0>;
> > + interrupts = <0 9 0x4>,
> > + <0 8 0x4>;
> > + reg = <0xf9021000 0x1000>,
> > + <0xf9022000 0x1000>;
> > + };
> > +
> > + frame@f9023000 {
> > + frame-number = <1>;
> > + interrupts = <0 10 0x4>;
> > + reg = <0xf9023000 0x1000>;
> > + status = "disabled";
> > + };
> > +
> > + frame@f9024000 {
> > + frame-number = <2>;
> > + interrupts = <0 11 0x4>;
> > + reg = <0xf9024000 0x1000>;
> > + status = "disabled";
> > + };
> > +
> > + frame@f9025000 {
> > + frame-number = <3>;
> > + interrupts = <0 12 0x4>;
> > + reg = <0xf9025000 0x1000>;
> > + status = "disabled";
> > + };
> > +
> > + frame@f9026000 {
> > + frame-number = <4>;
> > + interrupts = <0 13 0x4>;
> > + reg = <0xf9026000 0x1000>;
> > + status = "disabled";
> > + };
> > +
> > + frame@f9027000 {
> > + frame-number = <5>;
> > + interrupts = <0 14 0x4>;
> > + reg = <0xf9027000 0x1000>;
> > + status = "disabled";
> > + };
> > +
> > + frame@f9028000 {
> > + frame-number = <6>;
> > + interrupts = <0 15 0x4>;
> > + reg = <0xf9028000 0x1000>;
> > + status = "disabled";
> > + };
> > + };
> > +
> > + restart@fc4ab000 {
> > + compatible = "qcom,pshold";
> > + reg = <0xfc4ab000 0x4>;
> > + };
> > +
> > + msmgpio: pinctrl@fd510000 {
> > + compatible = "qcom,msm8994-pinctrl", "qcom,msm8974-pinctrl";
> > + reg = <0xfd510000 0x4000>;
> > + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
> > + gpio-controller;
> > + #gpio-cells = <2>;
> > + interrupt-controller;
> > + #interrupt-cells = <2>;
> > + };
> > +
> > + blsp1_uart2: serial@f991e000 {
> > + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
> > + reg = <0xf991e000 0x1000>;
> > + interrupts = <0 108 0>;
>
> Please add a trigger type and use the GIC_SPI/IRQ_TYPE_* macros.
>
updated both 8992, 8994
> > + status = "disabled";
> > + clock-names = "core", "iface";
> > + clocks = <&clock_gcc GCC_BLSP1_UART2_APPS_CLK>,
> > + <&clock_gcc GCC_BLSP1_AHB_CLK>;
> > + };
> > +
> > + clock_gcc: qcom,gcc@fc400000 {
> > + compatible = "qcom,gcc-8994";
> > + #clock-cells = <1>;
> > + #reset-cells = <1>;
> > + #power-domain-cells = <1>;
> > + reg = <0xfc400000 0x2000>;
> > + clock-names = "xo", "xo_a_clk";
>
> What is this for? Please remove.
It came from here:
https://android.googlesource.com/kernel/msm.git/+/android-msm-bullhead-3.10-marshmallow-dr1.6/arch/arm/boot/dts/qcom/msm8992.dtsi#745
I take it we are not using them anymore? Removed.
>
> > + };
> > +
> > + clock_rpm: qcom,rpmcc@fc401880 {
> > + compatible = "qcom,rpmcc";
>
> What is this node? Please remove.
Again, something from 3.10. Doesnt look like we need it now.
-jeremy
>
> --
> Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
> a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
