Sort of tagging on to Archit's patchset here.
Adds the core gpu, and dsi nodes for the apq8064 needed
to get graphics working on the nexus7 and other devices.
Feedback would be greatly appreciated!
Cc: Archit Taneja <architt@xxxxxxxxxxxxxx>
Cc: vinay simha <vinaysimha@xxxxxxxxxxxxxxxxxxxx>
Cc: andy.gross@xxxxxxxxxx
Cc: robdclark@xxxxxxxxx
Cc: linux-arm-msm@xxxxxxxxxxxxxxx
Cc: dri-devel@xxxxxxxxxxxxxxxxxxxxx
Signed-off-by: John Stultz <john.stultz@xxxxxxxxxx>
---
arch/arm/boot/dts/qcom-apq8064-pins.dtsi | 10 ++
arch/arm/boot/dts/qcom-apq8064.dtsi | 227 +++++++++++++++++++++++++++++++
2 files changed, 237 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-apq8064-pins.dtsi b/arch/arm/boot/dts/qcom-apq8064-pins.dtsi
index 6b801e7..7bb0677 100644
--- a/arch/arm/boot/dts/qcom-apq8064-pins.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064-pins.dtsi
@@ -284,4 +284,14 @@
bias-disable = <0>;
};
};
+
+ dsi_panel_pinctrl: dsi-panel-pinctrl {
+ mux {
+ pins = "gpio54";
+ function = "gpio";
+ bias-pull-up;
+ drive-strength = <8>;
+ };
+ };
+
};
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 35a5759..49333cc 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -919,6 +919,228 @@
reg = <0x1a400000 0x100>;
};
+ gpu: adreno-3xx@4300000 {
+ compatible = "qcom,adreno-3xx";
+ reg = <0x04300000 0x20000>;
+ reg-names = "kgsl_3d0_reg_memory";
+ interrupts = <GIC_SPI 80 0>;
+ interrupt-names = "kgsl_3d0_irq";
+ clock-names =
+ "core_clk",
+ "iface_clk",
+ "mem_clk",
+ "mem_iface_clk";
+ clocks =
+ <&mmcc GFX3D_CLK>,
+ <&mmcc GFX3D_AHB_CLK>,
+ <&mmcc GFX3D_AXI_CLK>,
+ <&mmcc MMSS_IMEM_AHB_CLK>;
+ qcom,chipid = <0x03020002>;
+
+ iommus = <&gfx3d 0
+ &gfx3d 1
+ &gfx3d 2
+ &gfx3d 3
+ &gfx3d 4
+ &gfx3d 5
+ &gfx3d 6
+ &gfx3d 7
+ &gfx3d 8
+ &gfx3d 9
+ &gfx3d 10
+ &gfx3d 11
+ &gfx3d 12
+ &gfx3d 13
+ &gfx3d 14
+ &gfx3d 15
+ &gfx3d 16
+ &gfx3d 17
+ &gfx3d 18
+ &gfx3d 19
+ &gfx3d 20
+ &gfx3d 21
+ &gfx3d 22
+ &gfx3d 23
+ &gfx3d 24
+ &gfx3d 25
+ &gfx3d 26
+ &gfx3d 27
+ &gfx3d 28
+ &gfx3d 29
+ &gfx3d 30
+ &gfx3d 31
+ &gfx3d1 0
+ &gfx3d1 1
+ &gfx3d1 2
+ &gfx3d1 3
+ &gfx3d1 4
+ &gfx3d1 5
+ &gfx3d1 6
+ &gfx3d1 7
+ &gfx3d1 8
+ &gfx3d1 9
+ &gfx3d1 10
+ &gfx3d1 11
+ &gfx3d1 12
+ &gfx3d1 13
+ &gfx3d1 14
+ &gfx3d1 15
+ &gfx3d1 16
+ &gfx3d1 17
+ &gfx3d1 18
+ &gfx3d1 19
+ &gfx3d1 20
+ &gfx3d1 21
+ &gfx3d1 22
+ &gfx3d1 23
+ &gfx3d1 24
+ &gfx3d1 25
+ &gfx3d1 26
+ &gfx3d1 27
+ &gfx3d1 28
+ &gfx3d1 29
+ &gfx3d1 30
+ &gfx3d1 31>;
+
+ qcom,gpu-pwrlevels {
+ compatible = "qcom,gpu-pwrlevels";
+ qcom,gpu-pwrlevel@0 {
+ qcom,gpu-freq = <450000000>;
+ };
+ qcom,gpu-pwrlevel@1 {
+ qcom,gpu-freq = <27000000>;
+ };
+ };
+ };
+
+ mmss_sfpb: syscon@5700000 {
+ compatible = "syscon";
+ reg = <0x5700000 0x70>;
+ };
+
+ dsi0: qcom,mdss_dsi@4700000 {
+ compatible = "qcom,mdss-dsi-ctrl";
+ label = "MDSS DSI CTRL->0";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 82 0>;
+ reg = <0x04700000 0x200>;
+ reg-names = "dsi_ctrl";
+
+ clocks = <&mmcc DSI_M_AHB_CLK>,
+ <&mmcc DSI_S_AHB_CLK>,
+ <&mmcc AMP_AHB_CLK>,
+ <&mmcc DSI_CLK>,
+ <&mmcc DSI1_BYTE_CLK>,
+ <&mmcc DSI_PIXEL_CLK>,
+ <&mmcc DSI1_ESC_CLK>,
+ <&mmcc DSI1_BYTE_SRC>,
+ <&mmcc DSI1_ESC_SRC>,
+ <&mmcc DSI_SRC>,
+ <&mmcc DSI_PIXEL_SRC>;
+ clock-names = "iface_clk", "bus_clk", "core_mmss_clk",
+ "src_clk", "byte_clk", "pixel_clk",
+ "core_clk", "byte_clk_src", "esc_clk_src",
+ "dsi_clk_src", "pixel_clk_src";
+
+ syscon-sfpb = <&mmss_sfpb>;
+ phys = <&dsi0_phy>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi0_in: endpoint {
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi0_out: endpoint {
+ };
+ };
+ };
+ };
+
+
+ dsi0_phy: qcom,mdss_dsi_phy@4700200 {
+ compatible = "qcom,dsi-phy-28nm-8960";
+ #clock-cells = <1>;
+
+ reg = <0x04700200 0x100>,
+ <0x04700300 0x200>,
+ <0x04700500 0x5c>;
+ reg-names = "dsi_pll", "dsi_phy", "dsi_phy_regulator";
+ clock-names = "iface_clk";
+ clocks = <&mmcc DSI_M_AHB_CLK>;
+ };
+
+
+ mdp_port0: iommu@7500000 {
+ compatible = "qcom,apq8064-iommu";
+ #iommu-cells = <1>;
+ clock-names =
+ "smmu_pclk",
+ "iommu_clk";
+ clocks =
+ <&mmcc SMMU_AHB_CLK>,
+ <&mmcc MDP_AXI_CLK>;
+ reg = <0x07500000 0x100000>;
+ interrupts =
+ <GIC_SPI 63 0>,
+ <GIC_SPI 64 0>;
+ qcom,ncb = <2>;
+ };
+
+ mdp_port1: iommu@7600000 {
+ compatible = "qcom,apq8064-iommu";
+ #iommu-cells = <1>;
+ clock-names =
+ "smmu_pclk",
+ "iommu_clk";
+ clocks =
+ <&mmcc SMMU_AHB_CLK>,
+ <&mmcc MDP_AXI_CLK>;
+ reg = <0x07600000 0x100000>;
+ interrupts =
+ <GIC_SPI 61 0>,
+ <GIC_SPI 62 0>;
+ qcom,ncb = <2>;
+ };
+
+ gfx3d: iommu@7c00000 {
+ compatible = "qcom,apq8064-iommu";
+ #iommu-cells = <1>;
+ clock-names =
+ "smmu_pclk",
+ "iommu_clk";
+ clocks =
+ <&mmcc SMMU_AHB_CLK>,
+ <&mmcc GFX3D_AXI_CLK>;
+ reg = <0x07c00000 0x100000>;
+ interrupts =
+ <GIC_SPI 69 0>,
+ <GIC_SPI 70 0>;
+ qcom,ncb = <3>;
+ };
+
+ gfx3d1: iommu@7d00000 {
+ compatible = "qcom,apq8064-iommu";
+ #iommu-cells = <1>;
+ clock-names =
+ "smmu_pclk",
+ "iommu_clk";
+ clocks =
+ <&mmcc SMMU_AHB_CLK>,
+ <&mmcc GFX3D_AXI_CLK>;
+ reg = <0x07d00000 0x100000>;
+ interrupts =
+ <GIC_SPI 210 0>,
+ <GIC_SPI 211 0>;
+ qcom,ncb = <3>;
+ };
+
pcie: pci@1b500000 {
compatible = "qcom,pcie-apq8064", "snps,dw-pcie";
reg = <0x1b500000 0x1000
@@ -1016,6 +1238,11 @@
"hdmi_clk",
"tv_clk";
+ iommus = <&mdp_port0 0
+ &mdp_port0 2
+ &mdp_port1 0
+ &mdp_port1 2>;
+
ports {
#address-cells = <1>;
#size-cells = <0>;
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
