On Thu, Dec 19, 2024 at 03:49:30PM +0800, Jun Nie wrote:
> The content of every half of screen is sent out via one interface in
> dual-DSI case. The content for every interface is blended by a LM
> pair,
Only in case of the quad-pipe topology.
> thus no content of any pipe shall cross the LM pair.
You have swapped the cause and the consequence.
> We need
> to clip plane into pipes per left and right half screen ROI if topology
> is quad pipe.
>
> The clipped rectangle on every half of screen will be split further
> by half if its width still exceeds limit.
>
> Signed-off-by: Jun Nie <jun.nie@xxxxxxxxxx>
> ---
> drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c | 7 ++
> drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.h | 6 ++
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h | 2 +
> drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c | 108 +++++++++++++++++++++-------
> 4 files changed, 97 insertions(+), 26 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> index 6ef7e6ed00238..bad75af4e50ab 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> @@ -1363,6 +1363,13 @@ int dpu_crtc_vblank(struct drm_crtc *crtc, bool en)
> return 0;
> }
>
> +unsigned int dpu_crtc_get_num_lm(const struct drm_crtc_state *state)
> +{
> + struct dpu_crtc_state *cstate = to_dpu_crtc_state(state);
> +
> + return cstate->num_mixers;
> +}
> +
> #ifdef CONFIG_DEBUG_FS
> static int _dpu_debugfs_status_show(struct seq_file *s, void *data)
> {
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.h
> index 0b148f3ce0d7a..d1bb3f84fe440 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.h
> @@ -264,4 +264,10 @@ static inline enum dpu_crtc_client_type dpu_crtc_get_client_type(
>
> void dpu_crtc_frame_event_cb(struct drm_crtc *crtc, u32 event);
>
> +/**
> + * dpu_crtc_get_num_lm - Get mixer number in this CRTC pipeline
> + * state: Pointer to drm crtc state object
> + */
Rewrite to be a proper kerneldoc, move it to the function body.
> +unsigned int dpu_crtc_get_num_lm(const struct drm_crtc_state *state);
> +
> #endif /* _DPU_CRTC_H_ */
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h
> index 56a0edf2a57c6..39fe338e76691 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h
> @@ -145,11 +145,13 @@ struct dpu_hw_pixel_ext {
> * such as decimation, flip etc to program this field
> * @dest_rect: destination ROI.
> * @rotation: simplified drm rotation hint
> + * @valid: notify that this pipe and config is in use
> */
> struct dpu_sw_pipe_cfg {
> struct drm_rect src_rect;
> struct drm_rect dst_rect;
> unsigned int rotation;
> + bool valid;
> };
>
> /**
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
> index 46c6b6126fe5c..fca6e609898a6 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
> @@ -802,8 +802,14 @@ static int dpu_plane_atomic_check_nosspp(struct drm_plane *plane,
> struct dpu_plane_state *pstate = to_dpu_plane_state(new_plane_state);
> struct dpu_sw_pipe_cfg *pipe_cfg;
> struct dpu_sw_pipe_cfg *r_pipe_cfg;
> + struct dpu_sw_pipe *pipe;
> + struct dpu_sw_pipe *r_pipe;
> + struct dpu_sw_pipe_cfg init_pipe_cfg;
> struct drm_rect fb_rect = { 0 };
> + const struct drm_display_mode *mode = &crtc_state->adjusted_mode;
> uint32_t max_linewidth;
> + u32 num_lm;
> + int stage_id, num_stages;
>
> min_scale = FRAC_16_16(1, MAX_UPSCALE_RATIO);
> max_scale = MAX_DOWNSCALE_RATIO << 16;
> @@ -826,13 +832,10 @@ static int dpu_plane_atomic_check_nosspp(struct drm_plane *plane,
> return -EINVAL;
> }
>
> - /* move the assignment here, to ease handling to another pairs later */
> - pipe_cfg = &pstate->pipe_cfg[0];
> - r_pipe_cfg = &pstate->pipe_cfg[1];
> - /* state->src is 16.16, src_rect is not */
> - drm_rect_fp_to_int(&pipe_cfg->src_rect, &new_plane_state->src);
> + num_lm = dpu_crtc_get_num_lm(crtc_state);
>
> - pipe_cfg->dst_rect = new_plane_state->dst;
> + /* state->src is 16.16, src_rect is not */
> + drm_rect_fp_to_int(&init_pipe_cfg.src_rect, &new_plane_state->src);
>
> fb_rect.x2 = new_plane_state->fb->width;
> fb_rect.y2 = new_plane_state->fb->height;
> @@ -857,34 +860,87 @@ static int dpu_plane_atomic_check_nosspp(struct drm_plane *plane,
>
> max_linewidth = pdpu->catalog->caps->max_linewidth;
>
> - drm_rect_rotate(&pipe_cfg->src_rect,
> + drm_rect_rotate(&init_pipe_cfg.src_rect,
> new_plane_state->fb->width, new_plane_state->fb->height,
> new_plane_state->rotation);
>
> - if ((drm_rect_width(&pipe_cfg->src_rect) > max_linewidth) ||
> - _dpu_plane_calc_clk(&crtc_state->adjusted_mode, pipe_cfg) > max_mdp_clk_rate) {
> - if (drm_rect_width(&pipe_cfg->src_rect) > 2 * max_linewidth) {
> - DPU_DEBUG_PLANE(pdpu, "invalid src " DRM_RECT_FMT " line:%u\n",
> - DRM_RECT_ARG(&pipe_cfg->src_rect), max_linewidth);
> - return -E2BIG;
> + /*
> + * We have 1 mixer pair cfg for 1:1:1 and 2:2:1 topology, 2 mixer pair
> + * configs for left and right half screen in case of 4:4:2 topology.
> + * But we may have 2 rect to split plane with 1 config for 2:2:1.
> + * So need to handle super wide plane splitting, and plane on right half
What is 'super wide'?
> + * for quad-pipe case. Check dest rectangle left/right clipping
> + * first, then check super wide rectangle splitting in every half next.
> + */
> + num_stages = (num_lm + 1) / 2;
> + /* iterate mixer configs for this plane, to separate left/right with the id */
> + for (stage_id = 0; stage_id < num_stages; stage_id++) {
> + struct drm_rect mixer_rect = {stage_id * mode->hdisplay / num_stages, 0,
> + (stage_id + 1) * mode->hdisplay / num_stages,
> + mode->vdisplay};
> + int cfg_idx = stage_id * PIPES_PER_STAGE;
> +
> + pipe = &pstate->pipe[cfg_idx];
> + r_pipe = &pstate->pipe[cfg_idx + 1];
> + pipe_cfg = &pstate->pipe_cfg[cfg_idx];
> + r_pipe_cfg = &pstate->pipe_cfg[cfg_idx + 1];
> +
> + drm_rect_fp_to_int(&pipe_cfg->src_rect, &new_plane_state->src);
> + pipe_cfg->dst_rect = new_plane_state->dst;
> +
> + DPU_DEBUG_PLANE(pdpu, "checking src " DRM_RECT_FMT
> + " vs clip window " DRM_RECT_FMT "\n",
> + DRM_RECT_ARG(&pipe_cfg->src_rect),
> + DRM_RECT_ARG(&mixer_rect));
> +
> + /*
> + * If this plane does not fall into mixer rect, check next
> + * mixer rect.
> + */
> + if (!drm_rect_clip_scaled(&pipe_cfg->src_rect,
> + &pipe_cfg->dst_rect,
> + &mixer_rect)) {
> + memset(pipe_cfg, 0, 2 * sizeof(struct dpu_sw_pipe_cfg));
> + memset(pipe, 0, 2 * sizeof(struct dpu_sw_pipe));
No need to memset, just set valid to false.
Also it is incorrect to memset the pipe, you've just lost the
pipe->sspp, which is set if the non-virtual implementation is in play.
> + continue;
> }
>
> - *r_pipe_cfg = *pipe_cfg;
> - pipe_cfg->src_rect.x2 = (pipe_cfg->src_rect.x1 + pipe_cfg->src_rect.x2) >> 1;
> - pipe_cfg->dst_rect.x2 = (pipe_cfg->dst_rect.x1 + pipe_cfg->dst_rect.x2) >> 1;
> - r_pipe_cfg->src_rect.x1 = pipe_cfg->src_rect.x2;
> - r_pipe_cfg->dst_rect.x1 = pipe_cfg->dst_rect.x2;
> - } else {
> - memset(r_pipe_cfg, 0, sizeof(*r_pipe_cfg));
> - }
> + pipe_cfg->valid = true;
> + pipe_cfg->dst_rect.x1 -= mixer_rect.x1;
> + pipe_cfg->dst_rect.x2 -= mixer_rect.x1;
> +
> + DPU_DEBUG_PLANE(pdpu, "Got clip src:" DRM_RECT_FMT " dst: " DRM_RECT_FMT "\n",
> + DRM_RECT_ARG(&pipe_cfg->src_rect), DRM_RECT_ARG(&pipe_cfg->dst_rect));
> +
> + /* Split super wide rect into 2 rect */
Why is it super wide? Just wide.
> + if ((drm_rect_width(&pipe_cfg->src_rect) > max_linewidth) ||
> + _dpu_plane_calc_clk(mode, pipe_cfg) > max_mdp_clk_rate) {
> +
> + if (drm_rect_width(&pipe_cfg->src_rect) > 2 * max_linewidth) {
> + DPU_DEBUG_PLANE(pdpu, "invalid src " DRM_RECT_FMT " line:%u\n",
> + DRM_RECT_ARG(&pipe_cfg->src_rect), max_linewidth);
> + return -E2BIG;
> + }
> +
> + memcpy(r_pipe_cfg, pipe_cfg, sizeof(struct dpu_sw_pipe_cfg));
> + pipe_cfg->src_rect.x2 = (pipe_cfg->src_rect.x1 + pipe_cfg->src_rect.x2) >> 1;
> + pipe_cfg->dst_rect.x2 = (pipe_cfg->dst_rect.x1 + pipe_cfg->dst_rect.x2) >> 1;
> + r_pipe_cfg->src_rect.x1 = pipe_cfg->src_rect.x2;
> + r_pipe_cfg->dst_rect.x1 = pipe_cfg->dst_rect.x2;
> + r_pipe_cfg->valid = true;
> + DPU_DEBUG_PLANE(pdpu, "Split super wide plane into:"
> + DRM_RECT_FMT " and " DRM_RECT_FMT "\n",
> + DRM_RECT_ARG(&pipe_cfg->src_rect),
> + DRM_RECT_ARG(&r_pipe_cfg->src_rect));
> + } else {
> + memset(r_pipe_cfg, 0, sizeof(struct dpu_sw_pipe_cfg));
> + memset(r_pipe, 0, sizeof(struct dpu_sw_pipe));
Again, drop the memsets.
> + }
>
> - drm_rect_rotate_inv(&pipe_cfg->src_rect,
> - new_plane_state->fb->width, new_plane_state->fb->height,
> - new_plane_state->rotation);
> - if (drm_rect_width(&r_pipe_cfg->src_rect) != 0)
> - drm_rect_rotate_inv(&r_pipe_cfg->src_rect,
> + drm_rect_rotate_inv(&pipe_cfg->src_rect,
> new_plane_state->fb->width, new_plane_state->fb->height,
> new_plane_state->rotation);
You've dropped the rotation of the right rectangle. Why?
> + }
>
> pstate->needs_qos_remap = drm_atomic_crtc_needs_modeset(crtc_state);
>
>
> --
> 2.34.1
>
--
With best wishes
Dmitry
