[PATCH v3 12/15] drm/msm/dpu: support plane splitting in quad-pipe case

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The content of every half of screen is sent out via one interface in
dual-DSI case. The content for every interface is blended by a LM
pair, thus no content of any pipe shall cross the LM pair. We need
to clip plane into pipes per left and right half screen ROI if topology
is quad pipe.

The clipped rectangle on every half of screen will be split further
by half if its width still exceeds limit.

Signed-off-by: Jun Nie <jun.nie@xxxxxxxxxx>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c    |   7 ++
 drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.h    |   6 ++
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h |   2 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c   | 108 +++++++++++++++++++++-------
 4 files changed, 97 insertions(+), 26 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
index 6ef7e6ed00238..bad75af4e50ab 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
@@ -1363,6 +1363,13 @@ int dpu_crtc_vblank(struct drm_crtc *crtc, bool en)
 	return 0;
 }
 
+unsigned int dpu_crtc_get_num_lm(const struct drm_crtc_state *state)
+{
+	struct dpu_crtc_state *cstate = to_dpu_crtc_state(state);
+
+	return cstate->num_mixers;
+}
+
 #ifdef CONFIG_DEBUG_FS
 static int _dpu_debugfs_status_show(struct seq_file *s, void *data)
 {
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.h
index 0b148f3ce0d7a..d1bb3f84fe440 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.h
@@ -264,4 +264,10 @@ static inline enum dpu_crtc_client_type dpu_crtc_get_client_type(
 
 void dpu_crtc_frame_event_cb(struct drm_crtc *crtc, u32 event);
 
+/**
+ * dpu_crtc_get_num_lm - Get mixer number in this CRTC pipeline
+ * state: Pointer to drm crtc state object
+ */
+unsigned int dpu_crtc_get_num_lm(const struct drm_crtc_state *state);
+
 #endif /* _DPU_CRTC_H_ */
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h
index 56a0edf2a57c6..39fe338e76691 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h
@@ -145,11 +145,13 @@ struct dpu_hw_pixel_ext {
  *             such as decimation, flip etc to program this field
  * @dest_rect: destination ROI.
  * @rotation: simplified drm rotation hint
+ * @valid: notify that this pipe and config is in use
  */
 struct dpu_sw_pipe_cfg {
 	struct drm_rect src_rect;
 	struct drm_rect dst_rect;
 	unsigned int rotation;
+	bool valid;
 };
 
 /**
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
index 46c6b6126fe5c..fca6e609898a6 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
@@ -802,8 +802,14 @@ static int dpu_plane_atomic_check_nosspp(struct drm_plane *plane,
 	struct dpu_plane_state *pstate = to_dpu_plane_state(new_plane_state);
 	struct dpu_sw_pipe_cfg *pipe_cfg;
 	struct dpu_sw_pipe_cfg *r_pipe_cfg;
+	struct dpu_sw_pipe *pipe;
+	struct dpu_sw_pipe *r_pipe;
+	struct dpu_sw_pipe_cfg init_pipe_cfg;
 	struct drm_rect fb_rect = { 0 };
+	const struct drm_display_mode *mode = &crtc_state->adjusted_mode;
 	uint32_t max_linewidth;
+	u32 num_lm;
+	int stage_id, num_stages;
 
 	min_scale = FRAC_16_16(1, MAX_UPSCALE_RATIO);
 	max_scale = MAX_DOWNSCALE_RATIO << 16;
@@ -826,13 +832,10 @@ static int dpu_plane_atomic_check_nosspp(struct drm_plane *plane,
 		return -EINVAL;
 	}
 
-	/* move the assignment here, to ease handling to another pairs later */
-	pipe_cfg = &pstate->pipe_cfg[0];
-	r_pipe_cfg = &pstate->pipe_cfg[1];
-	/* state->src is 16.16, src_rect is not */
-	drm_rect_fp_to_int(&pipe_cfg->src_rect, &new_plane_state->src);
+	num_lm = dpu_crtc_get_num_lm(crtc_state);
 
-	pipe_cfg->dst_rect = new_plane_state->dst;
+	/* state->src is 16.16, src_rect is not */
+	drm_rect_fp_to_int(&init_pipe_cfg.src_rect, &new_plane_state->src);
 
 	fb_rect.x2 = new_plane_state->fb->width;
 	fb_rect.y2 = new_plane_state->fb->height;
@@ -857,34 +860,87 @@ static int dpu_plane_atomic_check_nosspp(struct drm_plane *plane,
 
 	max_linewidth = pdpu->catalog->caps->max_linewidth;
 
-	drm_rect_rotate(&pipe_cfg->src_rect,
+	drm_rect_rotate(&init_pipe_cfg.src_rect,
 			new_plane_state->fb->width, new_plane_state->fb->height,
 			new_plane_state->rotation);
 
-	if ((drm_rect_width(&pipe_cfg->src_rect) > max_linewidth) ||
-	     _dpu_plane_calc_clk(&crtc_state->adjusted_mode, pipe_cfg) > max_mdp_clk_rate) {
-		if (drm_rect_width(&pipe_cfg->src_rect) > 2 * max_linewidth) {
-			DPU_DEBUG_PLANE(pdpu, "invalid src " DRM_RECT_FMT " line:%u\n",
-					DRM_RECT_ARG(&pipe_cfg->src_rect), max_linewidth);
-			return -E2BIG;
+	/*
+	 * We have 1 mixer pair cfg for 1:1:1 and 2:2:1 topology, 2 mixer pair
+	 * configs for left and right half screen in case of 4:4:2 topology.
+	 * But we may have 2 rect to split plane with 1 config for 2:2:1.
+	 * So need to handle super wide plane splitting, and plane on right half
+	 * for quad-pipe case. Check dest rectangle left/right clipping
+	 * first, then check super wide rectangle splitting in every half next.
+	 */
+	num_stages = (num_lm + 1) / 2;
+	/* iterate mixer configs for this plane, to separate left/right with the id */
+	for (stage_id = 0; stage_id < num_stages; stage_id++) {
+		struct drm_rect mixer_rect = {stage_id * mode->hdisplay / num_stages, 0,
+					(stage_id + 1) * mode->hdisplay / num_stages,
+					mode->vdisplay};
+		int cfg_idx = stage_id * PIPES_PER_STAGE;
+
+		pipe = &pstate->pipe[cfg_idx];
+		r_pipe = &pstate->pipe[cfg_idx + 1];
+		pipe_cfg = &pstate->pipe_cfg[cfg_idx];
+		r_pipe_cfg = &pstate->pipe_cfg[cfg_idx + 1];
+
+		drm_rect_fp_to_int(&pipe_cfg->src_rect, &new_plane_state->src);
+		pipe_cfg->dst_rect = new_plane_state->dst;
+
+		DPU_DEBUG_PLANE(pdpu, "checking src " DRM_RECT_FMT
+				" vs clip window " DRM_RECT_FMT "\n",
+				DRM_RECT_ARG(&pipe_cfg->src_rect),
+				DRM_RECT_ARG(&mixer_rect));
+
+		/*
+		 * If this plane does not fall into mixer rect, check next
+		 * mixer rect.
+		 */
+		if (!drm_rect_clip_scaled(&pipe_cfg->src_rect,
+					  &pipe_cfg->dst_rect,
+					  &mixer_rect)) {
+			memset(pipe_cfg, 0, 2 * sizeof(struct dpu_sw_pipe_cfg));
+			memset(pipe, 0, 2 * sizeof(struct dpu_sw_pipe));
+			continue;
 		}
 
-		*r_pipe_cfg = *pipe_cfg;
-		pipe_cfg->src_rect.x2 = (pipe_cfg->src_rect.x1 + pipe_cfg->src_rect.x2) >> 1;
-		pipe_cfg->dst_rect.x2 = (pipe_cfg->dst_rect.x1 + pipe_cfg->dst_rect.x2) >> 1;
-		r_pipe_cfg->src_rect.x1 = pipe_cfg->src_rect.x2;
-		r_pipe_cfg->dst_rect.x1 = pipe_cfg->dst_rect.x2;
-	} else {
-		memset(r_pipe_cfg, 0, sizeof(*r_pipe_cfg));
-	}
+		pipe_cfg->valid = true;
+		pipe_cfg->dst_rect.x1 -= mixer_rect.x1;
+		pipe_cfg->dst_rect.x2 -= mixer_rect.x1;
+
+		DPU_DEBUG_PLANE(pdpu, "Got clip src:" DRM_RECT_FMT " dst: " DRM_RECT_FMT "\n",
+				DRM_RECT_ARG(&pipe_cfg->src_rect), DRM_RECT_ARG(&pipe_cfg->dst_rect));
+
+		/* Split super wide rect into 2 rect */
+		if ((drm_rect_width(&pipe_cfg->src_rect) > max_linewidth) ||
+		     _dpu_plane_calc_clk(mode, pipe_cfg) > max_mdp_clk_rate) {
+
+			if (drm_rect_width(&pipe_cfg->src_rect) > 2 * max_linewidth) {
+				DPU_DEBUG_PLANE(pdpu, "invalid src " DRM_RECT_FMT " line:%u\n",
+						DRM_RECT_ARG(&pipe_cfg->src_rect), max_linewidth);
+				return -E2BIG;
+			}
+
+			memcpy(r_pipe_cfg, pipe_cfg, sizeof(struct dpu_sw_pipe_cfg));
+			pipe_cfg->src_rect.x2 = (pipe_cfg->src_rect.x1 + pipe_cfg->src_rect.x2) >> 1;
+			pipe_cfg->dst_rect.x2 = (pipe_cfg->dst_rect.x1 + pipe_cfg->dst_rect.x2) >> 1;
+			r_pipe_cfg->src_rect.x1 = pipe_cfg->src_rect.x2;
+			r_pipe_cfg->dst_rect.x1 = pipe_cfg->dst_rect.x2;
+			r_pipe_cfg->valid = true;
+			DPU_DEBUG_PLANE(pdpu, "Split super wide plane into:"
+					DRM_RECT_FMT " and " DRM_RECT_FMT "\n",
+					DRM_RECT_ARG(&pipe_cfg->src_rect),
+					DRM_RECT_ARG(&r_pipe_cfg->src_rect));
+		} else {
+			memset(r_pipe_cfg, 0, sizeof(struct dpu_sw_pipe_cfg));
+			memset(r_pipe, 0, sizeof(struct dpu_sw_pipe));
+		}
 
-	drm_rect_rotate_inv(&pipe_cfg->src_rect,
-			    new_plane_state->fb->width, new_plane_state->fb->height,
-			    new_plane_state->rotation);
-	if (drm_rect_width(&r_pipe_cfg->src_rect) != 0)
-		drm_rect_rotate_inv(&r_pipe_cfg->src_rect,
+		drm_rect_rotate_inv(&pipe_cfg->src_rect,
 				    new_plane_state->fb->width, new_plane_state->fb->height,
 				    new_plane_state->rotation);
+	}
 
 	pstate->needs_qos_remap = drm_atomic_crtc_needs_modeset(crtc_state);
 

-- 
2.34.1





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux