The sdm845 platforms have a hardware issue that requires keeping some of the MMNOC GDSCs in SW collapse mode (which is the power-on default). But if some driver tries to use these GDSCs and the mode is updated because of runtime pm calls, we may get a board hang. Introduce a flag to skip any updates to the power collapse settings for the impacted GDSCs to avoid unexpected board hangs. Fixes: 7bb38c20f2b6 ("arm64: dts: qcom: sdm845: Add DT nodes for the TBUs") Reviewed-by: Mike Tipton <quic_mdtipton@xxxxxxxxxxx> Signed-off-by: Georgi Djakov <quic_c_gdjako@xxxxxxxxxxx> --- v3: - No changes v2: https://lore.kernel.org/r/20241009151657.1041691-1-quic_c_gdjako@xxxxxxxxxxx/ - Pick up Reviewed-by tag - Add Fixes tag v1: https://lore.kernel.org/r/20240813120015.3242787-1-quic_c_gdjako@xxxxxxxxxxx/ drivers/clk/qcom/gcc-sdm845.c | 6 +++--- drivers/clk/qcom/gdsc.c | 3 +++ drivers/clk/qcom/gdsc.h | 1 + 3 files changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/clk/qcom/gcc-sdm845.c b/drivers/clk/qcom/gcc-sdm845.c index dc3aa7014c3e..019b780e31c8 100644 --- a/drivers/clk/qcom/gcc-sdm845.c +++ b/drivers/clk/qcom/gcc-sdm845.c @@ -3503,7 +3503,7 @@ static struct gdsc hlos1_vote_mmnoc_mmu_tbu_hf0_gdsc = { .name = "hlos1_vote_mmnoc_mmu_tbu_hf0_gdsc", }, .pwrsts = PWRSTS_OFF_ON, - .flags = VOTABLE, + .flags = VOTABLE | SKIP_SET_COLLAPSE, }; static struct gdsc hlos1_vote_mmnoc_mmu_tbu_hf1_gdsc = { @@ -3512,7 +3512,7 @@ static struct gdsc hlos1_vote_mmnoc_mmu_tbu_hf1_gdsc = { .name = "hlos1_vote_mmnoc_mmu_tbu_hf1_gdsc", }, .pwrsts = PWRSTS_OFF_ON, - .flags = VOTABLE, + .flags = VOTABLE | SKIP_SET_COLLAPSE, }; static struct gdsc hlos1_vote_mmnoc_mmu_tbu_sf_gdsc = { @@ -3521,7 +3521,7 @@ static struct gdsc hlos1_vote_mmnoc_mmu_tbu_sf_gdsc = { .name = "hlos1_vote_mmnoc_mmu_tbu_sf_gdsc", }, .pwrsts = PWRSTS_OFF_ON, - .flags = VOTABLE, + .flags = VOTABLE | SKIP_SET_COLLAPSE, }; static struct clk_regmap *gcc_sdm670_clocks[] = { diff --git a/drivers/clk/qcom/gdsc.c b/drivers/clk/qcom/gdsc.c index fa5fe4c2a2ee..4b83cec9137c 100644 --- a/drivers/clk/qcom/gdsc.c +++ b/drivers/clk/qcom/gdsc.c @@ -121,6 +121,9 @@ static int gdsc_update_collapse_bit(struct gdsc *sc, bool val) u32 reg, mask; int ret; + if (sc->flags & SKIP_SET_COLLAPSE) + return 0; + if (sc->collapse_mask) { reg = sc->collapse_ctrl; mask = sc->collapse_mask; diff --git a/drivers/clk/qcom/gdsc.h b/drivers/clk/qcom/gdsc.h index 1e2779b823d1..6bb7e023a19a 100644 --- a/drivers/clk/qcom/gdsc.h +++ b/drivers/clk/qcom/gdsc.h @@ -68,6 +68,7 @@ struct gdsc { #define RETAIN_FF_ENABLE BIT(7) #define NO_RET_PERIPH BIT(8) #define HW_CTRL_TRIGGER BIT(9) +#define SKIP_SET_COLLAPSE BIT(10) struct reset_controller_dev *rcdev; unsigned int *resets; unsigned int reset_count;