Improves several parts of the devicetree: 1. The eDP panel bindings 2. Add a lid switch 3. Add bluetooth and describe wlan (depends on [1]) [1]: https://lore.kernel.org/all/20241007-x1e80100-pwrseq-qcp-v1-0-f7166510ab17@xxxxxxxxxx/ --- I seem to get a warning that the pci17cb vendor is undocumented (wlan) I can find this compatible in Documentation/devicetree/bindings/net/wireless/qcom,ath12k.yaml But pci17cb doesn't really seem like a vendor name to me, I have ignored this warning for now. Changes in v5: - Fix the pinctrl-# definition in the wcn7850-pmu node in the bluetooth/wifi patch - Link to v4: https://lore.kernel.org/r/20241125-asus_qcom_display-v4-0-61a4da162406@xxxxxxxxxxx Changes in v4: - Fixed the pin parameters for the backlight enable pin - Fixed the wcn_sw_en drive-strength, this was not in the acpi table I checked. - Fixed the ordering of several nodes in the bluetooth/wifi patch - Link to v3: https://lore.kernel.org/r/20241124-asus_qcom_display-v3-0-002b723b1920@xxxxxxxxxxx Changes in v3: - Fixed commit message formatting (line wrapping) - Fixed bad indentation (lid switch pinctrl) - Fixed bluetooth addition and added wifi description - Link to v2: https://lore.kernel.org/r/20241123-asus_qcom_display-v2-0-a0bff8576024@xxxxxxxxxxx Changes in v2: - Add missing gpiokeys include in the lid switch patch - Add depends on for the bluetooth patch - Link to v1: https://lore.kernel.org/r/20241123-asus_qcom_display-v1-0-85a9ff9240aa@xxxxxxxxxxx --- Maud Spierings (3): arm64: dts: qcom: x1e80100-vivobook-s15: Use the samsung,atna33xc20 panel driver arm64: dts: qcom: x1e80100-vivobook-s15: Add lid switch arm64: dts: qcom: x1e80100-vivobook-s15: Add bluetooth .../boot/dts/qcom/x1e80100-asus-vivobook-s15.dts | 202 ++++++++++++++++++++- 1 file changed, 201 insertions(+), 1 deletion(-) --- base-commit: 5f48de798324665d18f539ee09a61de1a9221f33 change-id: 20241116-asus_qcom_display-ce5ff7293340 Best regards, -- Maud Spierings <maud_spierings@xxxxxxxxxxx>
