On 16.11.2024 2:37 AM, Krishna chaitanya chundru wrote:
> PCIe equalization presets are predefined settings used to optimize
> signal integrity by compensating for signal loss and distortion in
> high-speed data transmission.
>
> As per PCIe spec 6.0.1 revision section 8.3.3.3 & 4.2.4 for data rates
> of 8.0 GT/s, 16.0 GT/s, 32.0 GT/s, and 64.0 GT/s, there is a way to
> configure lane equalization presets for each lane to enhance the PCIe
> link reliability. Each preset value represents a different combination
> of pre-shoot and de-emphasis values. For each data rate, different
> registers are defined: for 8.0 GT/s, registers are defined in section
> 7.7.3.4; for 16.0 GT/s, in section 7.7.5.9, etc. The 8.0 GT/s rate has
> an extra receiver preset hint, requiring 16 bits per lane, while the
> remaining data rates use 8 bits per lane.
>
> Based on the number of lanes and the supported data rate, this function
> reads the device tree property and stores in the presets structure.
>
> Signed-off-by: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
> ---
> drivers/pci/of.c | 62 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
> drivers/pci/pci.h | 17 +++++++++++++--
> 2 files changed, 77 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/pci/of.c b/drivers/pci/of.c
> index dacea3fc5128..0d37bc231956 100644
> --- a/drivers/pci/of.c
> +++ b/drivers/pci/of.c
> @@ -826,3 +826,65 @@ u32 of_pci_get_slot_power_limit(struct device_node *node,
> return slot_power_limit_mw;
> }
> EXPORT_SYMBOL_GPL(of_pci_get_slot_power_limit);
> +
> +int of_pci_get_equalization_presets(struct device *dev,
> + struct pci_eq_presets *presets,
> + int num_lanes)
> +{
> + int ret;
> +
> + if (of_property_present(dev->of_node, "eq-presets-8gts")) {
> + presets->eq_presets_8gts = devm_kzalloc(dev, sizeof(u16) * num_lanes, GFP_KERNEL);
> + if (!presets->eq_presets_8gts)
If you make this an array with enum indices, you can make a for loop and
read "eq-presets-%ugts", (8 << i)
Konrad
