In RX Lane configuration sequence of SC8280XP, the register
V5_RX_UCDR_FO_GAIN is incorrectly spelled as RX_UCDR_SO_GAIN and
hence the programming sequence is wrong. Fix the register sequence
accordingly to avoid any compliance failures. This has been tested
on SA8775P by checking device mode enumeration in SuperSpeed.
Cc: <stable@xxxxxxxxxxxxxxx>
Fixes: c0c7769cdae2 ("phy: qcom-qmp: Add SC8280XP USB3 UNI phy")
Signed-off-by: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
---
drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
index acd6075bf6d9..c9c337840715 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
@@ -1052,7 +1052,7 @@ static const struct qmp_phy_init_tbl sc8280xp_usb3_uniphy_rx_tbl[] = {
QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
- QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_GAIN, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FO_GAIN, 0x0a),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL1, 0x54),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL2, 0x0f),
QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
--
2.34.1
