On 24-10-06 18:40:51, Dmitry Baryshkov wrote:
> On Fri, Oct 04, 2024 at 04:57:38PM GMT, Abel Vesa wrote:
> > The Parade PS8830 is a Type-C muti-protocol retimer controlled over I2C.
> > It provides both altmode and orientation handling.
> >
> > Add a driver with support for the following modes:
> > - DP 4lanes
> > - DP 2lanes + USB3
> > - USB3
> >
> > Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx>
> > ---
> > drivers/usb/typec/mux/Kconfig | 10 +
> > drivers/usb/typec/mux/Makefile | 1 +
> > drivers/usb/typec/mux/ps8830.c | 424 +++++++++++++++++++++++++++++++++++++++++
> > 3 files changed, 435 insertions(+)
> >
> > diff --git a/drivers/usb/typec/mux/Kconfig b/drivers/usb/typec/mux/Kconfig
> > index ce7db6ad30572a0a74890f5f11944fb3ff07f635..48613b67f1c5dacd14d54baf91c3066377cf97be 100644
> > --- a/drivers/usb/typec/mux/Kconfig
> > +++ b/drivers/usb/typec/mux/Kconfig
> > @@ -56,6 +56,16 @@ config TYPEC_MUX_NB7VPQ904M
> > Say Y or M if your system has a On Semiconductor NB7VPQ904M Type-C
> > redriver chip found on some devices with a Type-C port.
> >
> > +config TYPEC_MUX_PS8830
> > + tristate "Parade PS8830 Type-C retimer driver"
> > + depends on I2C
> > + depends on DRM || DRM=n
> > + select DRM_AUX_BRIDGE if DRM_BRIDGE && OF
> > + select REGMAP_I2C
> > + help
> > + Say Y or M if your system has a Parade PS8830 Type-C retimer chip
> > + found on some devices with a Type-C port.
> > +
> > config TYPEC_MUX_PTN36502
> > tristate "NXP PTN36502 Type-C redriver driver"
> > depends on I2C
> > diff --git a/drivers/usb/typec/mux/Makefile b/drivers/usb/typec/mux/Makefile
> > index bb96f30267af05b33b9277dcf1cc0e1527d2dcdd..4b23b12cfe45a0ff8a37f38c7ba050f572d556e7 100644
> > --- a/drivers/usb/typec/mux/Makefile
> > +++ b/drivers/usb/typec/mux/Makefile
> > @@ -6,5 +6,6 @@ obj-$(CONFIG_TYPEC_MUX_PI3USB30532) += pi3usb30532.o
> > obj-$(CONFIG_TYPEC_MUX_INTEL_PMC) += intel_pmc_mux.o
> > obj-$(CONFIG_TYPEC_MUX_IT5205) += it5205.o
> > obj-$(CONFIG_TYPEC_MUX_NB7VPQ904M) += nb7vpq904m.o
> > +obj-$(CONFIG_TYPEC_MUX_PS8830) += ps8830.o
> > obj-$(CONFIG_TYPEC_MUX_PTN36502) += ptn36502.o
> > obj-$(CONFIG_TYPEC_MUX_WCD939X_USBSS) += wcd939x-usbss.o
> > diff --git a/drivers/usb/typec/mux/ps8830.c b/drivers/usb/typec/mux/ps8830.c
> > new file mode 100644
> > index 0000000000000000000000000000000000000000..58990f7860bf77ec12d00f0d3df3a40735bbf9d8
> > --- /dev/null
> > +++ b/drivers/usb/typec/mux/ps8830.c
> > @@ -0,0 +1,424 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * Parade PS8830 usb retimer driver
> > + *
> > + * Copyright (C) 2024 Linaro Ltd.
> > + */
> > +
> > +#include <drm/bridge/aux-bridge.h>
> > +#include <linux/clk.h>
> > +#include <linux/gpio/consumer.h>
> > +#include <linux/i2c.h>
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/mutex.h>
> > +#include <linux/regmap.h>
> > +#include <linux/regulator/consumer.h>
> > +#include <linux/usb/typec_altmode.h>
> > +#include <linux/usb/typec_dp.h>
> > +#include <linux/usb/typec_mux.h>
> > +#include <linux/usb/typec_retimer.h>
> > +
> > +struct ps8830_retimer {
> > + struct i2c_client *client;
> > + struct gpio_desc *reset_gpio;
> > + struct regmap *regmap;
> > + struct typec_switch_dev *sw;
> > + struct typec_retimer *retimer;
> > + struct clk *xo_clk;
> > + struct regulator *vdd_supply;
> > + struct regulator *vdd33_supply;
> > + struct regulator *vdd33_cap_supply;
> > + struct regulator *vddat_supply;
> > + struct regulator *vddar_supply;
> > + struct regulator *vddio_supply;
> > +
> > + struct typec_switch *typec_switch;
> > + struct typec_mux *typec_mux;
> > +
> > + struct mutex lock; /* protect non-concurrent retimer & switch */
> > +
> > + enum typec_orientation orientation;
> > + unsigned long mode;
> > + int cfg[3];
> > +};
> > +
> > +static void ps8830_write(struct ps8830_retimer *retimer, int cfg0, int cfg1, int cfg2)
> > +{
> > + if (cfg0 == retimer->cfg[0] &&
> > + cfg1 == retimer->cfg[1] &&
> > + cfg2 == retimer->cfg[2])
> > + return;
> > +
> > + retimer->cfg[0] = cfg0;
> > + retimer->cfg[1] = cfg1;
> > + retimer->cfg[2] = cfg2;
> > +
> > + regmap_write(retimer->regmap, 0x0, cfg0);
> > + regmap_write(retimer->regmap, 0x1, cfg1);
> > + regmap_write(retimer->regmap, 0x2, cfg2);
> > +}
>
> This looks like a reimplementation of regcache. Is it really necessary?
Sure, will use regcache.
>
> > +
> > +static void ps8830_configure(struct ps8830_retimer *retimer, int cfg0, int cfg1, int cfg2)
> > +{
> > + /* Write safe-mode config before switching to new config */
>
> Why is this required?
Data sheet says it needs to be configured into safe mode before
switching modes.
>
> > + ps8830_write(retimer, 0x1, 0x0, 0x0);
> > +
> > + ps8830_write(retimer, cfg0, cfg1, cfg2);
> > +}
> > +
> > +static int ps8380_set(struct ps8830_retimer *retimer)
> > +{
> > + int cfg0 = 0x00;
> > + int cfg1 = 0x00;
> > + int cfg2 = 0x00;
> > +
> > + if (retimer->orientation == TYPEC_ORIENTATION_NONE ||
> > + retimer->mode == TYPEC_STATE_SAFE) {
> > + ps8830_write(retimer, 0x1, 0x0, 0x0);
> > + return 0;
> > + }
> > +
> > + if (retimer->orientation == TYPEC_ORIENTATION_NORMAL)
> > + cfg0 = 0x01;
> > + else
> > + cfg0 = 0x03;
> > +
> > + switch (retimer->mode) {
> > + /* USB3 Only */
> > + case TYPEC_STATE_USB:
> > + cfg0 |= 0x20;
> > + break;
> > +
>
> The TYPEC_DP clauses should only be used if state->alt->swid is set to
> USB_TYPEC_DP_SID. Other altmodes share id space for their states.
Make sense. Will check svid for DP.
>
> > + /* DP Only */
> > + case TYPEC_DP_STATE_C:
> > + cfg1 = 0x85;
> > + break;
> > +
> > + case TYPEC_DP_STATE_E:
> > + cfg1 = 0x81;
> > + break;
> > +
> > + /* DP + USB */
> > + case TYPEC_DP_STATE_D:
> > + cfg0 |= 0x20;
> > + cfg1 = 0x85;
> > + break;
>
> CDE, please.
Will do.
>
> > +
> > + default:
> > + return -EOPNOTSUPP;
> > + }
> > +
> > + ps8830_configure(retimer, cfg0, cfg1, cfg2);
> > +
> > + return 0;
> > +}
> > +
>
> --
> With best wishes
> Dmitry
Thanks for reviewing.
Abel
