Re: [PATCH v2 2/3] arm64: dts: qcom: sm8250-xiaomi-elish: Add wifi node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Oct 07, 2024 at 11:40:48AM -0700, Jeff Johnson wrote:
> On 10/7/2024 6:02 AM, Jianhua Lu wrote:
> > Add wifi node and this wifi module is connected to pice port.
> 
> s/pici/pcie/ (or perhaps better: PCIe)
> 
Acked
> > The following is qca6390 probe message:
> >   ath11k_pci 0000:01:00.0: Adding to iommu group 12
> >   ath11k_pci 0000:01:00.0: BAR 0 [mem 0x60400000-0x604fffff 64bit]: assigned
> >   ath11k_pci 0000:01:00.0: enabling device (0000 -> 0002)
> >   ath11k_pci 0000:01:00.0: MSI vectors: 32
> >   ath11k_pci 0000:01:00.0: qca6390 hw2.0
> >   ath11k_pci 0000:01:00.0: chip_id 0x0 chip_family 0xb board_id 0xff soc_id 0xffffffff
> >   ath11k_pci 0000:01:00.0: fw_version 0x10121492 fw_build_timestamp 2021-11-04 11:23 fw_build_id
> > 
> > Signed-off-by: Jianhua Lu <lujianhua000@xxxxxxxxx>
> > ---
> > changes in v2:
> > 1. add ath11k-calibration-variant property.
> > 
> >  .../dts/qcom/sm8250-xiaomi-elish-common.dtsi  | 19 +++++++++++++++++++
> >  1 file changed, 19 insertions(+)
> > 
> > diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
> > index ebea283f56ea..7a55e271c3ac 100644
> > --- a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
> > @@ -680,6 +680,25 @@ &pcie0_phy {
> >  	status = "okay";
> >  };
> >  
> > +&pcieport0 {
> > +	wifi@0 {
> > +		compatible = "pci17cb,1101";
> > +		reg = <0x10000 0x0 0x0 0x0 0x0>;
> > +
> > +		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
> > +		vddaon-supply = <&vreg_pmu_aon_0p59>;
> > +		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
> > +		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
> > +		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
> > +		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
> > +		vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>;
> > +		vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
> > +		vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
> > +
> > +		qcom,ath11k-calibration-variant = "Xiaomi_Pad_5Pro";
> 
> Are you going to submit the board file per the guidance Dmitry provided?

I want to get comment for this patch, then send board file.
I have send board file to ath11k@xxxxxxxxxxxxxxxxxxx now.
> 
> Note that I am not up to speed on the firmware/board maintenance procedures so
> we'll need to wait for Kalle to have bandwidth to handle the request (and show
> me how he handles it).
> 
> /jeff
> 




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux