Re: [PATCH v2 2/3] arm64: dts: qcom: sm8250-xiaomi-elish: Add wifi node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 10/7/2024 6:02 AM, Jianhua Lu wrote:
> Add wifi node and this wifi module is connected to pice port.

s/pici/pcie/ (or perhaps better: PCIe)

> The following is qca6390 probe message:
>   ath11k_pci 0000:01:00.0: Adding to iommu group 12
>   ath11k_pci 0000:01:00.0: BAR 0 [mem 0x60400000-0x604fffff 64bit]: assigned
>   ath11k_pci 0000:01:00.0: enabling device (0000 -> 0002)
>   ath11k_pci 0000:01:00.0: MSI vectors: 32
>   ath11k_pci 0000:01:00.0: qca6390 hw2.0
>   ath11k_pci 0000:01:00.0: chip_id 0x0 chip_family 0xb board_id 0xff soc_id 0xffffffff
>   ath11k_pci 0000:01:00.0: fw_version 0x10121492 fw_build_timestamp 2021-11-04 11:23 fw_build_id
> 
> Signed-off-by: Jianhua Lu <lujianhua000@xxxxxxxxx>
> ---
> changes in v2:
> 1. add ath11k-calibration-variant property.
> 
>  .../dts/qcom/sm8250-xiaomi-elish-common.dtsi  | 19 +++++++++++++++++++
>  1 file changed, 19 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
> index ebea283f56ea..7a55e271c3ac 100644
> --- a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
> @@ -680,6 +680,25 @@ &pcie0_phy {
>  	status = "okay";
>  };
>  
> +&pcieport0 {
> +	wifi@0 {
> +		compatible = "pci17cb,1101";
> +		reg = <0x10000 0x0 0x0 0x0 0x0>;
> +
> +		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
> +		vddaon-supply = <&vreg_pmu_aon_0p59>;
> +		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
> +		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
> +		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
> +		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
> +		vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>;
> +		vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
> +		vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
> +
> +		qcom,ath11k-calibration-variant = "Xiaomi_Pad_5Pro";

Are you going to submit the board file per the guidance Dmitry provided?

Note that I am not up to speed on the firmware/board maintenance procedures so
we'll need to wait for Kalle to have bandwidth to handle the request (and show
me how he handles it).

/jeff





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux