Re: [PATCH] tty: serial: msm: Remove duplicate handling of clocks

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 05/16, Pramod Gurav wrote:
> On 11 May 2016 at 14:30, Pramod Gurav <pramod.gurav@xxxxxxxxxx> wrote:
> > msm_serial driver provides a .pm callback to the serial core to enable
> > and disable clock resource in suspend/resume path. This function is
> > also called before msm_startup. msm_startup also enables the clocks which
> > is not needed. Hence remove the duplcate clock operation from msm_startup
> > and msm_shutdown. Same is done in console setup to get rid of duplicate
> > clock operation.
> >
> > Tested on DB410C console.
> >
> > Signed-off-by: Pramod Gurav <pramod.gurav@xxxxxxxxxx>
> > ---
> >  drivers/tty/serial/msm_serial.c | 15 ++-------------
> >  1 file changed, 2 insertions(+), 13 deletions(-)
> >
> > diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c
> > index dcde955..73c3217 100644
> > --- a/drivers/tty/serial/msm_serial.c
> > +++ b/drivers/tty/serial/msm_serial.c
> > @@ -959,15 +959,6 @@ static int msm_set_baud_rate(struct uart_port *port, unsigned int baud,
> >         return baud;
> >  }
> >
> > -static void msm_init_clock(struct uart_port *port)
> > -{
> > -       struct msm_port *msm_port = UART_TO_MSM(port);
> > -
> > -       clk_prepare_enable(msm_port->clk);
> > -       clk_prepare_enable(msm_port->pclk);
> > -       msm_serial_set_mnd_regs(port);
> > -}
> > -
> >  static int msm_startup(struct uart_port *port)
> >  {
> >         struct msm_port *msm_port = UART_TO_MSM(port);
> > @@ -982,7 +973,7 @@ static int msm_startup(struct uart_port *port)
> >         if (unlikely(ret))
> >                 return ret;
> >
> > -       msm_init_clock(port);
> > +       msm_serial_set_mnd_regs(port);
> 
> Further testing with another UART port made me realize that serial
> port does not work after disabling msm_port->clk clock. The RX data
> part will be affected.
> Confirmed from manual that this clock should never be turned of to
> avoid loss of incoming data. Sorry for the noise.
> 

Does that mean this patch shouldn't be applied? I hope that the
pm callback would do the right thing and be called when we expect
to be receiving data on the line.

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux