msm_serial driver provides a .pm callback to the serial core to enable
and disable clock resource in suspend/resume path. This function is
also called before msm_startup. msm_startup also enables the clocks which
is not needed. Hence remove the duplcate clock operation from msm_startup
and msm_shutdown. Same is done in console setup to get rid of duplicate
clock operation.
Tested on DB410C console.
Signed-off-by: Pramod Gurav <pramod.gurav@xxxxxxxxxx>
---
drivers/tty/serial/msm_serial.c | 15 ++-------------
1 file changed, 2 insertions(+), 13 deletions(-)
diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c
index dcde955..73c3217 100644
--- a/drivers/tty/serial/msm_serial.c
+++ b/drivers/tty/serial/msm_serial.c
@@ -959,15 +959,6 @@ static int msm_set_baud_rate(struct uart_port *port, unsigned int baud,
return baud;
}
-static void msm_init_clock(struct uart_port *port)
-{
- struct msm_port *msm_port = UART_TO_MSM(port);
-
- clk_prepare_enable(msm_port->clk);
- clk_prepare_enable(msm_port->pclk);
- msm_serial_set_mnd_regs(port);
-}
-
static int msm_startup(struct uart_port *port)
{
struct msm_port *msm_port = UART_TO_MSM(port);
@@ -982,7 +973,7 @@ static int msm_startup(struct uart_port *port)
if (unlikely(ret))
return ret;
- msm_init_clock(port);
+ msm_serial_set_mnd_regs(port);
if (likely(port->fifosize > 12))
rfr_level = port->fifosize - 12;
@@ -1021,8 +1012,6 @@ static void msm_shutdown(struct uart_port *port)
if (msm_port->is_uartdm)
msm_release_dma(msm_port);
- clk_disable_unprepare(msm_port->clk);
-
free_irq(port->irq, port);
}
@@ -1451,7 +1440,7 @@ static int __init msm_console_setup(struct console *co, char *options)
if (unlikely(!port->membase))
return -ENXIO;
- msm_init_clock(port);
+ msm_serial_set_mnd_regs(port);
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
--
1.8.2.1
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
