On 4.09.2024 12:42 AM, Jérôme de Bretagne wrote: > Add an initial devicetree for the Microsoft Surface Pro 9 5G, based > on SC8280XP. > > It enables the support for Wi-Fi, NVMe, the two USB Type-C ports, > Bluetooth, 5G cellular modem, audio output (via Bluetooth headsets), > external display via DisplayPort over Type-C (only the bottom USB > Type-C port is working so far, corresponding to the usb1 / dp1 nodes), > charging, the Surface Aggregator Module (SAM) to get keyboard and > touchpad working with the Surface Type Cover accessories. > > Some key features not supported yet: > - built-in display (but software fallback is working with efifb > when blacklisting the msm module) > - built-in display touchscreen > - external display with the top USB Type-C port > - speakers and microphones > - physical volume up and down keys > - LID switch detection > > This devicetree is based on the other SC8280XP ones, for the Lenovo > ThinkPad X13s and the Qualcomm CRD. > > Signed-off-by: Jérôme de Bretagne <jerome.debretagne@xxxxxxxxx> > --- > arch/arm64/boot/dts/qcom/Makefile | 1 + > .../sc8280xp-microsoft-surface-pro-9-5G.dts | 1099 +++++++++++++++++ > 2 files changed, 1100 insertions(+) > create mode 100644 arch/arm64/boot/dts/qcom/sc8280xp-microsoft-surface-pro-9-5G.dts Please match the filename to the compatible (i.e. sc8280xp-microsoft-arcata) Konrad
