[PATCH 4/4] arm64: dts: qcom: sc8280xp: Add Microsoft Surface Pro 9 5G

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add an initial devicetree for the Microsoft Surface Pro 9 5G, based
on SC8280XP.

It enables the support for Wi-Fi, NVMe, the two USB Type-C ports,
Bluetooth, 5G cellular modem, audio output (via Bluetooth headsets),
external display via DisplayPort over Type-C (only the bottom USB
Type-C port is working so far, corresponding to the usb1 / dp1 nodes),
charging, the Surface Aggregator Module (SAM) to get keyboard and
touchpad working with the Surface Type Cover accessories.

Some key features not supported yet:
- built-in display (but software fallback is working with efifb
  when blacklisting the msm module)
- built-in display touchscreen
- external display with the top USB Type-C port
- speakers and microphones
- physical volume up and down keys
- LID switch detection

This devicetree is based on the other SC8280XP ones, for the Lenovo
ThinkPad X13s and the Qualcomm CRD.

Signed-off-by: Jérôme de Bretagne <jerome.debretagne@xxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/Makefile             |    1 +
 .../sc8280xp-microsoft-surface-pro-9-5G.dts   | 1099 +++++++++++++++++
 2 files changed, 1100 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/sc8280xp-microsoft-surface-pro-9-5G.dts

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 0e5c810304fb..5eb67dc270c6 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -184,6 +184,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sc8180x-lenovo-flex-5g.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc8180x-primus.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc8280xp-crd.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc8280xp-lenovo-thinkpad-x13s.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc8280xp-microsoft-surface-pro-9-5G.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sda660-inforce-ifc6560.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm450-lenovo-tbx605f.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm450-motorola-ali.dtb
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-surface-pro-9-5G.dts b/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-surface-pro-9-5G.dts
new file mode 100644
index 000000000000..476932e8a9c5
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-surface-pro-9-5G.dts
@@ -0,0 +1,1099 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024, Jérôme de Bretagne <jerome.debretagne@xxxxxxxxx>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "sc8280xp.dtsi"
+#include "sc8280xp-pmics.dtsi"
+
+/ {
+	model = "Microsoft Surface Pro 9 5G";
+	compatible = "microsoft,arcata", "qcom,sc8280xp";
+
+	aliases {
+		serial0 = &uart18;
+		serial1 = &uart2;
+	};
+
+	wcd938x: audio-codec {
+		compatible = "qcom,wcd9380-codec";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wcd_default>;
+
+		reset-gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
+
+		vdd-buck-supply = <&vreg_s10b>;
+		vdd-rxtx-supply = <&vreg_s10b>;
+		vdd-io-supply = <&vreg_s10b>;
+		vdd-mic-bias-supply = <&vreg_bob>;
+
+		qcom,micbias1-microvolt = <1800000>;
+		qcom,micbias2-microvolt = <1800000>;
+		qcom,micbias3-microvolt = <1800000>;
+		qcom,micbias4-microvolt = <1800000>;
+		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+		qcom,rx-device = <&wcd_rx>;
+		qcom,tx-device = <&wcd_tx>;
+
+		#sound-dai-cells = <1>;
+	};
+
+	pmic-glink {
+		compatible = "qcom,sc8280xp-pmic-glink", "qcom,pmic-glink";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_con0_hs: endpoint {
+						remote-endpoint = <&usb_0_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_con0_ss: endpoint {
+						remote-endpoint = <&usb_0_qmpphy_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_con0_sbu: endpoint {
+						remote-endpoint = <&usb0_sbu_mux>;
+					};
+				};
+			};
+		};
+
+		connector@1 {
+			compatible = "usb-c-connector";
+			reg = <1>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_con1_hs: endpoint {
+						remote-endpoint = <&usb_1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_con1_ss: endpoint {
+						remote-endpoint = <&usb_1_qmpphy_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_con1_sbu: endpoint {
+						remote-endpoint = <&usb1_sbu_mux>;
+					};
+				};
+			};
+		};
+	};
+
+	vreg_nvme: regulator-nvme {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC3_SSD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 135 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&nvme_reg_en>;
+
+		regulator-boot-on;
+	};
+
+	vreg_vph_pwr: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VPH_VCC3R9";
+		regulator-min-microvolt = <3900000>;
+		regulator-max-microvolt = <3900000>;
+
+		regulator-always-on;
+	};
+
+	vreg_wlan: regulator-wlan {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC_WLAN_3R9";
+		regulator-min-microvolt = <3900000>;
+		regulator-max-microvolt = <3900000>;
+
+		gpio = <&pmr735a_gpios 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&hastings_reg_en>;
+
+		regulator-boot-on;
+	};
+
+	vreg_wwan: regulator-wwan {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC3B_WAN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pmc8280_2_gpios 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wwan_sw_en>;
+
+		regulator-boot-on;
+	};
+
+	reserved-memory {
+		gpu_mem: gpu-mem@8bf00000 {
+			reg = <0 0x8bf00000 0 0x2000>;
+			no-map;
+		};
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			size = <0x0 0x8000000>;
+			reusable;
+			linux,cma-default;
+		};
+	};
+
+	thermal-zones {
+		skin-temp-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&pmk8280_adc_tm 5>;
+
+			trips {
+				skin_temp_alert0: trip-point0 {
+					temperature = <55000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				skin_temp_alert1: trip-point1 {
+					temperature = <58000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				skin-temp-crit {
+					temperature = <73000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&skin_temp_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map1 {
+					trip = <&skin_temp_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	usb0-sbu-mux {
+		compatible = "pericom,pi3usb102", "gpio-sbu-mux";
+
+		enable-gpios = <&tlmm 101 GPIO_ACTIVE_LOW>;
+		select-gpios = <&tlmm 164 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb0_sbu_default>;
+
+		mode-switch;
+		orientation-switch;
+
+		port {
+			usb0_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_con0_sbu>;
+			};
+		};
+	};
+
+	usb1-sbu-mux {
+		compatible = "pericom,pi3usb102", "gpio-sbu-mux";
+
+		enable-gpios = <&tlmm 48 GPIO_ACTIVE_LOW>;
+		select-gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb1_sbu_default>;
+
+		mode-switch;
+		orientation-switch;
+
+		port {
+			usb1_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_con1_sbu>;
+			};
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8350-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-l1-l4-supply = <&vreg_s12b>;
+		vdd-l2-l7-supply = <&vreg_bob>;
+		vdd-l3-l5-supply = <&vreg_s11b>;
+		vdd-l6-l9-l10-supply = <&vreg_s12b>;
+		vdd-l8-supply = <&vreg_s12b>;
+
+		vreg_s10b: smps10 {
+			regulator-name = "vreg_s10b";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_s11b: smps11 {
+			regulator-name = "vreg_s11b";
+			regulator-min-microvolt = <1272000>;
+			regulator-max-microvolt = <1272000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_s12b: smps12 {
+			regulator-name = "vreg_s12b";
+			regulator-min-microvolt = <984000>;
+			regulator-max-microvolt = <984000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l3b: ldo3 {
+			regulator-name = "vreg_l3b";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-boot-on;
+		};
+
+		vreg_l4b: ldo4 {
+			regulator-name = "vreg_l4b";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b: ldo6 {
+			regulator-name = "vreg_l6b";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-boot-on;
+			regulator-always-on;	// FIXME: VDD_A_EDP_0_0P9
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8350c-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-bob-supply = <&vreg_vph_pwr>;
+		vdd-l1-l12-supply = <&vreg_s1c>;
+		vdd-l2-l8-supply = <&vreg_s1c>;
+		vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>;
+		vdd-l6-l9-l11-supply = <&vreg_bob>;
+		vdd-l10-supply = <&vreg_s11b>;
+
+		vreg_s1c: smps1 {
+			regulator-name = "vreg_s1c";
+			regulator-min-microvolt = <1880000>;
+			regulator-max-microvolt = <1900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l1c: ldo1 {
+			regulator-name = "vreg_l1c";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12c: ldo12 {
+			regulator-name = "vreg_l12c";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13c: ldo13 {
+			regulator-name = "vreg_l13c";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob: bob {
+			regulator-name = "vreg_bob";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+			regulator-always-on;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8350-rpmh-regulators";
+		qcom,pmic-id = "d";
+
+		vdd-l1-l4-supply = <&vreg_s11b>;
+		vdd-l2-l7-supply = <&vreg_bob>;
+		vdd-l3-l5-supply = <&vreg_s11b>;
+		vdd-l6-l9-l10-supply = <&vreg_s12b>;
+		vdd-l8-supply = <&vreg_s12b>;
+
+		vreg_l3d: ldo3 {
+			regulator-name = "vreg_l3d";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4d: ldo4 {
+			regulator-name = "vreg_l4d";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6d: ldo6 {
+			regulator-name = "vreg_l6d";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7d: ldo7 {
+			regulator-name = "vreg_l7d";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9d: ldo9 {
+			regulator-name = "vreg_l9d";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&dispcc0 {
+	status = "okay";
+};
+
+&dispcc1 {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		memory-region = <&gpu_mem>;
+		firmware-name = "qcom/sc8280xp/MICROSOFT/SurfacePro9/qcdxkmsuc8280.mbn";
+	};
+};
+
+&mdss0 {
+	status = "okay";
+};
+
+&mdss0_dp0 {
+	status = "okay";
+};
+
+&mdss0_dp0_out {
+	data-lanes = <0 1>;
+	remote-endpoint = <&usb_0_qmpphy_dp_in>;
+};
+
+&mdss0_dp1 {
+	status = "okay";
+};
+
+&mdss0_dp1_out {
+	data-lanes = <0 1>;
+	remote-endpoint = <&usb_1_qmpphy_dp_in>;
+};
+
+&pcie2a {
+	perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_nvme>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie2a_default>;
+
+	status = "okay";
+};
+
+&pcie2a_phy {
+	vdda-phy-supply = <&vreg_l6d>;
+	vdda-pll-supply = <&vreg_l4d>;
+
+	status = "okay";
+};
+
+&pcie3a {
+	perst-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_wwan>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie3a_default>;
+
+	status = "okay";
+};
+
+&pcie3a_phy {
+	vdda-phy-supply = <&vreg_l6d>;
+	vdda-pll-supply = <&vreg_l4d>;
+
+	status = "okay";
+};
+
+&pcie4 {
+	max-link-speed = <2>;
+
+	perst-gpios = <&tlmm 141 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 139 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_wlan>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie4_default>;
+
+	status = "okay";
+};
+
+&pcie4_port0 {
+	wifi@0 {
+		compatible = "pci17cb,1103";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+		qcom,ath11k-calibration-variant = "LE_X13S";
+	};
+};
+
+&pcie4_phy {
+	vdda-phy-supply = <&vreg_l6d>;
+	vdda-pll-supply = <&vreg_l4d>;
+
+	status = "okay";
+};
+
+&pmk8280_pon_pwrkey {
+	status = "okay";
+};
+
+&pmk8280_pon_resin {
+	status = "okay";
+};
+
+&pmk8280_rtc {
+	nvmem-cells = <&rtc_offset>;
+	nvmem-cell-names = "offset";
+
+	status = "okay";
+};
+
+&pmk8280_sdam_6 {
+	status = "okay";
+
+	rtc_offset: rtc-offset@bc {
+		reg = <0xbc 0x4>;
+	};
+};
+
+&qup0 {
+	status = "okay";
+};
+
+&qup1 {
+	status = "okay";
+};
+
+&qup2 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/sc8280xp/MICROSOFT/SurfacePro9/qcadsp8280.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_nsp0 {
+	firmware-name = "qcom/sc8280xp/MICROSOFT/SurfacePro9/qccdsp8280.mbn";
+
+	status = "okay";
+};
+
+&rxmacro {
+	status = "okay";
+};
+
+&sound {
+	compatible = "qcom,sc8280xp-sndcard";
+	model = "SC8280XP-MICROSOFT-SURFACE-PRO-9-5G";
+	audio-routing =
+		"SpkrLeft IN", "WSA_SPK1 OUT",
+		"SpkrRight IN", "WSA_SPK2 OUT",
+		"IN1_HPHL", "HPHL_OUT",
+		"IN2_HPHR", "HPHR_OUT",
+		"AMIC2", "MIC BIAS2",
+		"VA DMIC0", "MIC BIAS1",
+		"VA DMIC1", "MIC BIAS1",
+		"VA DMIC2", "MIC BIAS3",
+		"VA DMIC0", "VA MIC BIAS1",
+		"VA DMIC1", "VA MIC BIAS1",
+		"VA DMIC2", "VA MIC BIAS3",
+		"TX SWR_ADC1", "ADC2_OUTPUT";
+
+	wcd-playback-dai-link {
+		link-name = "WCD Playback";
+		cpu {
+			sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+		};
+
+		codec {
+			sound-dai = <&wcd938x 0>, <&swr1 0>, <&rxmacro 0>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+	};
+
+	wcd-capture-dai-link {
+		link-name = "WCD Capture";
+		cpu {
+			sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+		};
+
+		codec {
+			sound-dai = <&wcd938x 1>, <&swr2 0>, <&txmacro 0>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+	};
+
+	wsa-dai-link {
+		link-name = "WSA Playback";
+		cpu {
+			sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+		};
+
+		codec {
+			sound-dai = <&swr0 0>, <&wsamacro 0>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+	};
+
+	va-dai-link {
+		link-name = "VA Capture";
+		cpu {
+			sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+
+		codec {
+			sound-dai = <&vamacro 0>;
+		};
+	};
+};
+
+&swr0 {
+	status = "okay";
+};
+
+&swr1 {
+	status = "okay";
+
+	wcd_rx: wcd9380-rx@0,4 {
+		compatible = "sdw20217010d00";
+		reg = <0 4>;
+		qcom,rx-port-mapping = <1 2 3 4 5>;
+	};
+};
+
+&swr2 {
+	status = "okay";
+
+	wcd_tx: wcd9380-tx@0,3 {
+		compatible = "sdw20217010d00";
+		reg = <0 3>;
+		qcom,tx-port-mapping = <1 1 2 3>;
+	};
+};
+
+&txmacro {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn6855-bt";
+
+		vddio-supply = <&vreg_s10b>;
+		vddbtcxmx-supply = <&vreg_s12b>;
+		vddrfacmn-supply = <&vreg_s12b>;
+		vddrfa0p8-supply = <&vreg_s12b>;
+		vddrfa1p2-supply = <&vreg_s11b>;
+		vddrfa1p7-supply = <&vreg_s1c>;
+
+		max-speed = <3200000>;
+
+		enable-gpios = <&tlmm 133 GPIO_ACTIVE_HIGH>;
+		swctrl-gpios = <&tlmm 132 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&bt_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&uart18 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart18_state>;
+
+	surface-aggregator {
+		compatible = "surface,aggregator";
+
+		current-speed = <4000000>;
+		uart-has-rtscts;
+		uart-parity = "n";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&ssam_state>;
+
+		ssam_wakeup-int-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>;
+
+		ssh-d3-closes-handle;
+		ssh-buffer-size = <0x30>;
+
+		rtc {
+			ssam-uid = "01:01:01:00:00";
+		};
+
+		battery {
+			ssam-uid = "01:02:01:01:00";
+		};
+
+		ac {
+			ssam-uid = "01:02:01:01:01";
+		};
+
+		thermal-sensors {
+			ssam-uid = "01:03:01:00:02";
+		};
+
+		kip-hub {
+			ssam-uid = "00:00:01:0e:00";
+
+			hid-keyboard {
+				ssam-uid = "01:15:02:01:00";
+			};
+
+			hid-pen-stash {
+				ssam-uid = "01:15:02:02:00";
+			};
+
+			hid-touchpad {
+				ssam-uid = "01:15:02:03:00";
+			};
+
+			hid-tcfwupd {
+				ssam-uid = "01:15:02:05:00";
+			};
+		};
+
+		kip-tablet-mode-switch {
+			ssam-uid = "01:0e:01:00:01";
+		};
+	};
+};
+
+&usb_0 {
+	status = "okay";
+};
+
+&usb_0_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_0_dwc3_hs {
+	remote-endpoint = <&pmic_glink_con0_hs>;
+};
+
+&usb_0_hsphy {
+	vdda-pll-supply = <&vreg_l9d>;
+	vdda18-supply = <&vreg_l1c>;
+	vdda33-supply = <&vreg_l7d>;
+
+	status = "okay";
+};
+
+&usb_0_qmpphy {
+	vdda-phy-supply = <&vreg_l9d>;
+	vdda-pll-supply = <&vreg_l4d>;
+
+	orientation-switch;
+
+	status = "okay";
+};
+
+&usb_0_qmpphy_dp_in {
+	remote-endpoint = <&mdss0_dp0_out>;
+};
+
+&usb_0_qmpphy_out {
+	remote-endpoint = <&pmic_glink_con0_ss>;
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_con1_hs>;
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&vreg_l4b>;
+	vdda18-supply = <&vreg_l1c>;
+	vdda33-supply = <&vreg_l13c>;
+
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	vdda-phy-supply = <&vreg_l4b>;
+	vdda-pll-supply = <&vreg_l3b>;
+
+	orientation-switch;
+
+	status = "okay";
+};
+
+&usb_1_qmpphy_dp_in {
+	remote-endpoint = <&mdss0_dp1_out>;
+};
+
+&usb_1_qmpphy_out {
+	remote-endpoint = <&pmic_glink_con1_ss>;
+};
+
+&vamacro {
+	pinctrl-0 = <&dmic01_default>, <&dmic23_default>;
+	pinctrl-names = "default";
+
+	vdd-micb-supply = <&vreg_s10b>;
+
+	qcom,dmic-sample-rate = <4800000>;
+
+	status = "okay";
+};
+
+&wsamacro {
+	status = "okay";
+};
+
+&xo_board_clk {
+	clock-frequency = <38400000>;
+};
+
+/* PINCTRL */
+
+&lpass_tlmm {
+	status = "okay";
+};
+
+&pmc8280_2_gpios {
+	wwan_sw_en: wwan-sw-en-state {
+		pins = "gpio1";
+		function = "normal";
+	};
+};
+
+&pmr735a_gpios {
+	hastings_reg_en: hastings-reg-en-state {
+		pins = "gpio1";
+		function = "normal";
+	};
+};
+
+&tlmm {
+	gpio-reserved-ranges = <70 2>, <74 6>, <125 2>, <128 2>, <154 4>;
+
+	bt_default: bt-default-state {
+		hstp-bt-en-pins {
+			pins = "gpio133";
+			function = "gpio";
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		hstp-sw-ctrl-pins {
+			pins = "gpio132";
+			function = "gpio";
+			bias-pull-down;
+		};
+	};
+
+	nvme_reg_en: nvme-reg-en-state {
+		pins = "gpio135";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	pcie2a_default: pcie2a-default-state {
+		clkreq-n-pins {
+			pins = "gpio142";
+			function = "pcie2a_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio143";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio145";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+	       };
+	};
+
+	pcie3a_default: pcie3a-default-state {
+		clkreq-n-pins {
+			pins = "gpio150";
+			function = "pcie3a_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio151";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio148";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie4_default: pcie4-default-state {
+		clkreq-n-pins {
+			pins = "gpio140";
+			function = "pcie4_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio141";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio139";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+
+	ssam_state: ssam-state {
+		wake-int {
+			pins = "gpio85";
+			function = "gpio";
+			bias-disable;
+		};
+	};
+
+	uart2_default: uart2-default-state {
+		cts-pins {
+			pins = "gpio121";
+			function = "qup2";
+			bias-bus-hold;
+		};
+
+		rts-pins {
+			pins = "gpio122";
+			function = "qup2";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		rx-pins {
+			pins = "gpio124";
+			function = "qup2";
+			bias-pull-up;
+		};
+
+		tx-pins {
+			pins = "gpio123";
+			function = "qup2";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	uart18_state: uart18-state {
+		cts {
+			pins = "gpio66";
+			function = "qup18";
+			bias-pull-down;
+		};
+
+		rts-tx {
+			pins = "gpio67", "gpio68";
+			function = "qup18";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		rx {
+			pins = "gpio69";
+			function = "qup18";
+			bias-pull-up;
+		};
+	};
+
+	usb0_sbu_default: usb0-sbu-state {
+		oe-n-pins {
+			pins = "gpio101";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+			output-high;
+		};
+
+		sel-pins {
+			pins = "gpio164";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+		};
+	};
+
+	usb1_sbu_default: usb1-sbu-state {
+		oe-n-pins {
+			pins = "gpio48";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+			output-high;
+		};
+
+		sel-pins {
+			pins = "gpio47";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+		};
+	};
+
+	wcd_default: wcd-default-state {
+		reset-pins {
+			pins = "gpio106";
+			function = "gpio";
+			bias-disable;
+		};
+	};
+};
-- 
2.45.2





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux