On 24-08-30 11:09:07, Stephan Gerhold wrote:
> On X1E80100, GPIO interrupts for wakeup-capable pins have been broken since
> the introduction of the pinctrl driver. This prevents keyboard and touchpad
> from working on most of the X1E laptops. So far we have worked around this
> by manually building a kernel with the "wakeup-parent" removed from the
> pinctrl node in the device tree, but we cannot expect all users to do that.
>
> Implement a similar workaround in the driver by clearing the wakeirq_map
> for X1E80100. This avoids using the PDC wakeup parent for all GPIOs
> and handles the interrupts directly in the pinctrl driver instead.
>
> The PDC driver needs additional changes to support X1E80100 properly.
> Adding a workaround separately first allows to land the necessary PDC
> changes through the normal release cycle, while still solving the more
> critical problem with keyboard and touchpad on the current stable kernel
> versions. Bypassing the PDC is enough for now, because we have not yet
> enabled the deep idle states where using the PDC becomes necessary.
>
> Cc: stable@xxxxxxxxxxxxxxx
> Fixes: 05e4941d97ef ("pinctrl: qcom: Add X1E80100 pinctrl driver")
> Signed-off-by: Stephan Gerhold <stephan.gerhold@xxxxxxxxxx>
Reviewed-by: Abel Vesa <abel.vesa@xxxxxxxxxx>
> ---
> Commenting out .wakeirq_map as well would give an unused declaration
> warning for x1e80100_pdc_map. The map itself is correct, so I just "clear"
> it by setting .nwakeirq_map to 0 for now. It's just temporary - this patch
> will be reverted after we add X1E80100 support to the PDC driver.
> ---
> drivers/pinctrl/qcom/pinctrl-x1e80100.c | 4 +++-
> 1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/pinctrl/qcom/pinctrl-x1e80100.c b/drivers/pinctrl/qcom/pinctrl-x1e80100.c
> index 65ed933f05ce..abfcdd3da9e8 100644
> --- a/drivers/pinctrl/qcom/pinctrl-x1e80100.c
> +++ b/drivers/pinctrl/qcom/pinctrl-x1e80100.c
> @@ -1839,7 +1839,9 @@ static const struct msm_pinctrl_soc_data x1e80100_pinctrl = {
> .ngroups = ARRAY_SIZE(x1e80100_groups),
> .ngpios = 239,
> .wakeirq_map = x1e80100_pdc_map,
> - .nwakeirq_map = ARRAY_SIZE(x1e80100_pdc_map),
> + /* TODO: Enabling PDC currently breaks GPIO interrupts */
> + .nwakeirq_map = 0,
> + /* .nwakeirq_map = ARRAY_SIZE(x1e80100_pdc_map), */
> .egpio_func = 9,
> };
>
>
> ---
> base-commit: 128f71fe014fc91efa1407ce549f94a9a9f1072c
> change-id: 20240830-x1e80100-bypass-pdc-39a8c1ae594f
>
> Best regards,
> --
> Stephan Gerhold <stephan.gerhold@xxxxxxxxxx>
>
