Re: [PATCH 11/21] drm/msm/dpu: Add RM support for allocating CWB

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 30 Aug 2024 at 22:28, Jessica Zhang <quic_jesszhan@xxxxxxxxxxx> wrote:
>
>
>
> On 8/30/2024 10:18 AM, Dmitry Baryshkov wrote:
> > On Thu, Aug 29, 2024 at 01:48:32PM GMT, Jessica Zhang wrote:
> >> Add support for allocating the concurrent writeback mux as part of the
> >> WB allocation
> >>
> >> Signed-off-by: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
> >> ---
> >>   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h |  5 ++++-
> >>   drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c      | 30 +++++++++++++++++++++++++++--
> >>   2 files changed, 32 insertions(+), 3 deletions(-)
> >>
> >> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
> >> index c17d2d356f7a..c43cb55fe1d2 100644
> >> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
> >> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
> >> @@ -1,5 +1,7 @@
> >>   /* SPDX-License-Identifier: GPL-2.0-only */
> >> -/* Copyright (c) 2015-2018, The Linux Foundation. All rights reserved.
> >> +/*
> >> + * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
> >> + * Copyright (c) 2015-2018, The Linux Foundation. All rights reserved.
> >>    */
> >>
> >>   #ifndef _DPU_HW_MDSS_H
> >> @@ -352,6 +354,7 @@ struct dpu_mdss_color {
> >>   #define DPU_DBG_MASK_DSPP     (1 << 10)
> >>   #define DPU_DBG_MASK_DSC      (1 << 11)
> >>   #define DPU_DBG_MASK_CDM      (1 << 12)
> >> +#define DPU_DBG_MASK_CWB      (1 << 13)
> >>
> >>   /**
> >>    * struct dpu_hw_tear_check - Struct contains parameters to configure
> >> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c
> >> index bc99b04eae3a..738e9a081b10 100644
> >> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c
> >> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c
> >> @@ -1,9 +1,10 @@
> >>   // SPDX-License-Identifier: GPL-2.0-only
> >>   /*
> >>    * Copyright (c) 2016-2018, The Linux Foundation. All rights reserved.
> >> - * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
> >> + * Copyright (c) 2023-2024 Qualcomm Innovation Center, Inc. All rights reserved.
> >>    */
> >>
> >> +#include <drm/drm_managed.h>
> >>   #include "msm_drv.h"
> >>   #define pr_fmt(fmt)        "[drm:%s] " fmt, __func__
> >>   #include "dpu_kms.h"
> >> @@ -34,6 +35,7 @@ int dpu_rm_init(struct drm_device *dev,
> >>              void __iomem *mmio)
> >>   {
> >>      int rc, i;
> >> +    struct dpu_hw_blk_reg_map *cwb_reg_map;
> >>
> >>      if (!rm || !cat || !mmio) {
> >>              DPU_ERROR("invalid kms\n");
> >> @@ -100,11 +102,35 @@ int dpu_rm_init(struct drm_device *dev,
> >>              rm->hw_intf[intf->id - INTF_0] = hw;
> >>      }
> >>
> >> +    if (cat->cwb_count > 0) {
> >> +            cwb_reg_map = drmm_kzalloc(dev,
> >> +                            sizeof(*cwb_reg_map) * cat->cwb_count,
> >> +                            GFP_KERNEL);
> >
> > Please move CWB block pointers to dpu_rm. There is no need to allocate a
> > separate array.
>
> Hi Dmitry,
>
> Sorry, I'm not sure what you mean here. Can you clarify your comment?
>
> This is just allocating an array of the CWB register addresses so that
> the hw_wb block can use it to configure the CWB mux registers.

Excuse me. I asked to make the cwb_reg_map array a part of the
existing dpu_rm structure. This way other subblocks can access it
through dpu_rm API.

>
> Thanks,
>
> Jessica Zhang
>
> >
> >> +
> >> +            if (!cwb_reg_map) {
> >> +                    DPU_ERROR("failed cwb object creation\n");
> >> +                    return -ENOMEM;
> >> +            }
> >> +    }
> >> +
> >> +
> >> +    for (i = 0; i < cat->cwb_count; i++) {
> >> +            struct dpu_hw_blk_reg_map *cwb = &cwb_reg_map[i];
> >> +
> >> +            cwb->blk_addr = mmio + cat->cwb[i].base;
> >> +            cwb->log_mask = DPU_DBG_MASK_CWB;
> >> +    }
> >> +
> >>      for (i = 0; i < cat->wb_count; i++) {
> >>              struct dpu_hw_wb *hw;
> >>              const struct dpu_wb_cfg *wb = &cat->wb[i];
> >>
> >> -            hw = dpu_hw_wb_init(dev, wb, mmio, cat->mdss_ver);
> >> +            if (cat->cwb)
> >> +                    hw = dpu_hw_wb_init_with_cwb(dev, wb, mmio,
> >> +                                    cat->mdss_ver, cwb_reg_map);
> >> +            else
> >> +                    hw = dpu_hw_wb_init(dev, wb, mmio, cat->mdss_ver);
> >> +
> >>              if (IS_ERR(hw)) {
> >>                      rc = PTR_ERR(hw);
> >>                      DPU_ERROR("failed wb object creation: err %d\n", rc);
> >>
> >> --
> >> 2.34.1
> >>
> >
> > --
> > With best wishes
> > Dmitry



-- 
With best wishes
Dmitry




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux