Re: [PATCH 11/21] drm/msm/dpu: Add RM support for allocating CWB

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Aug 29, 2024 at 01:48:32PM GMT, Jessica Zhang wrote:
> Add support for allocating the concurrent writeback mux as part of the
> WB allocation
> 
> Signed-off-by: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
> ---
>  drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h |  5 ++++-
>  drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c      | 30 +++++++++++++++++++++++++++--
>  2 files changed, 32 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
> index c17d2d356f7a..c43cb55fe1d2 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
> @@ -1,5 +1,7 @@
>  /* SPDX-License-Identifier: GPL-2.0-only */
> -/* Copyright (c) 2015-2018, The Linux Foundation. All rights reserved.
> +/*
> + * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
> + * Copyright (c) 2015-2018, The Linux Foundation. All rights reserved.
>   */
>  
>  #ifndef _DPU_HW_MDSS_H
> @@ -352,6 +354,7 @@ struct dpu_mdss_color {
>  #define DPU_DBG_MASK_DSPP     (1 << 10)
>  #define DPU_DBG_MASK_DSC      (1 << 11)
>  #define DPU_DBG_MASK_CDM      (1 << 12)
> +#define DPU_DBG_MASK_CWB      (1 << 13)
>  
>  /**
>   * struct dpu_hw_tear_check - Struct contains parameters to configure
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c
> index bc99b04eae3a..738e9a081b10 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c
> @@ -1,9 +1,10 @@
>  // SPDX-License-Identifier: GPL-2.0-only
>  /*
>   * Copyright (c) 2016-2018, The Linux Foundation. All rights reserved.
> - * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
> + * Copyright (c) 2023-2024 Qualcomm Innovation Center, Inc. All rights reserved.
>   */
>  
> +#include <drm/drm_managed.h>
>  #include "msm_drv.h"
>  #define pr_fmt(fmt)	"[drm:%s] " fmt, __func__
>  #include "dpu_kms.h"
> @@ -34,6 +35,7 @@ int dpu_rm_init(struct drm_device *dev,
>  		void __iomem *mmio)
>  {
>  	int rc, i;
> +	struct dpu_hw_blk_reg_map *cwb_reg_map;
>  
>  	if (!rm || !cat || !mmio) {
>  		DPU_ERROR("invalid kms\n");
> @@ -100,11 +102,35 @@ int dpu_rm_init(struct drm_device *dev,
>  		rm->hw_intf[intf->id - INTF_0] = hw;
>  	}
>  
> +	if (cat->cwb_count > 0) {
> +		cwb_reg_map = drmm_kzalloc(dev,
> +				sizeof(*cwb_reg_map) * cat->cwb_count,
> +				GFP_KERNEL);

Please move CWB block pointers to dpu_rm. There is no need to allocate a
separate array.

> +
> +		if (!cwb_reg_map) {
> +			DPU_ERROR("failed cwb object creation\n");
> +			return -ENOMEM;
> +		}
> +	}
> +
> +
> +	for (i = 0; i < cat->cwb_count; i++) {
> +		struct dpu_hw_blk_reg_map *cwb = &cwb_reg_map[i];
> +
> +		cwb->blk_addr = mmio + cat->cwb[i].base;
> +		cwb->log_mask = DPU_DBG_MASK_CWB;
> +	}
> +
>  	for (i = 0; i < cat->wb_count; i++) {
>  		struct dpu_hw_wb *hw;
>  		const struct dpu_wb_cfg *wb = &cat->wb[i];
>  
> -		hw = dpu_hw_wb_init(dev, wb, mmio, cat->mdss_ver);
> +		if (cat->cwb)
> +			hw = dpu_hw_wb_init_with_cwb(dev, wb, mmio,
> +					cat->mdss_ver, cwb_reg_map);
> +		else
> +			hw = dpu_hw_wb_init(dev, wb, mmio, cat->mdss_ver);
> +
>  		if (IS_ERR(hw)) {
>  			rc = PTR_ERR(hw);
>  			DPU_ERROR("failed wb object creation: err %d\n", rc);
> 
> -- 
> 2.34.1
> 

-- 
With best wishes
Dmitry




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux