Re: [PATCH v5 08/12] drm/msm/dpu: split dpu_plane_atomic_check()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 28 Aug 2024 at 22:29, Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx> wrote:
>
>
>
> On 8/28/2024 11:59 AM, Dmitry Baryshkov wrote:
> > On Wed, 28 Aug 2024 at 21:27, Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx> wrote:
> >>
> >>
> >>
> >> On 6/26/2024 2:46 PM, Dmitry Baryshkov wrote:
> >>> Split dpu_plane_atomic_check() function into two pieces:
> >>>
> >>> dpu_plane_atomic_check_nopipe() performing generic checks on the pstate,
> >>> without touching the associated pipe,
> >>>
> >>> and
> >>>
> >>> dpu_plane_atomic_check_pipes(), which takes into account used pipes.
> >>>
> >>> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> >>> ---
> >>>    drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c | 178 +++++++++++++++++++-----------
> >>>    1 file changed, 112 insertions(+), 66 deletions(-)
> >>>
> >>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
> >>> index 115c1bd77bdd..9b9fe28052ad 100644
> >>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
> >>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
> >>> @@ -788,49 +788,22 @@ static int dpu_plane_atomic_check_pipe(struct dpu_plane *pdpu,
> >>>    #define MAX_UPSCALE_RATIO   20
> >>>    #define MAX_DOWNSCALE_RATIO 4
> >>>
> >>> -static int dpu_plane_atomic_check(struct drm_plane *plane,
> >>> -                               struct drm_atomic_state *state)
> >>> +static int dpu_plane_atomic_check_nopipe(struct drm_plane *plane,
> >>> +                                      struct drm_plane_state *new_plane_state,
> >>> +                                      const struct drm_crtc_state *crtc_state)
> >>>    {
> >>> -     struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state,
> >>> -                                                                              plane);
> >>>        int ret = 0, min_scale, max_scale;
> >>>        struct dpu_plane *pdpu = to_dpu_plane(plane);
> >>>        struct dpu_kms *kms = _dpu_plane_get_kms(&pdpu->base);
> >>>        u64 max_mdp_clk_rate = kms->perf.max_core_clk_rate;
> >>>        struct dpu_plane_state *pstate = to_dpu_plane_state(new_plane_state);
> >>> -     struct dpu_sw_pipe *pipe = &pstate->pipe;
> >>> -     struct dpu_sw_pipe *r_pipe = &pstate->r_pipe;
> >>> -     const struct drm_crtc_state *crtc_state = NULL;
> >>> -     const struct msm_format *fmt;
> >>>        struct dpu_sw_pipe_cfg *pipe_cfg = &pstate->pipe_cfg;
> >>>        struct dpu_sw_pipe_cfg *r_pipe_cfg = &pstate->r_pipe_cfg;
> >>>        struct drm_rect fb_rect = { 0 };
> >>>        uint32_t max_linewidth;
> >>> -     unsigned int rotation;
> >>> -     uint32_t supported_rotations;
> >>> -     const struct dpu_sspp_cfg *pipe_hw_caps;
> >>> -     const struct dpu_sspp_sub_blks *sblk;
> >>> -
> >>> -     if (new_plane_state->crtc)
> >>> -             crtc_state = drm_atomic_get_new_crtc_state(state,
> >>> -                                                        new_plane_state->crtc);
> >>> -
> >>> -     pipe->sspp = dpu_rm_get_sspp(&kms->rm, pdpu->pipe);
> >>> -     r_pipe->sspp = NULL;
> >>>
> >>> -     if (!pipe->sspp)
> >>> -             return -EINVAL;
> >>> -
> >>> -     pipe_hw_caps = pipe->sspp->cap;
> >>> -     sblk = pipe->sspp->cap->sblk;
> >>> -
> >>> -     if (sblk->scaler_blk.len) {
> >>> -             min_scale = FRAC_16_16(1, MAX_UPSCALE_RATIO);
> >>> -             max_scale = MAX_DOWNSCALE_RATIO << 16;
> >>> -     } else {
> >>> -             min_scale = DRM_PLANE_NO_SCALING;
> >>> -             max_scale = DRM_PLANE_NO_SCALING;
> >>> -     }
> >>> +     min_scale = FRAC_16_16(1, MAX_UPSCALE_RATIO);
> >>> +     max_scale = MAX_DOWNSCALE_RATIO << 16;
> >>>
> >>>        ret = drm_atomic_helper_check_plane_state(new_plane_state, crtc_state,
> >>>                                                  min_scale,
> >>> @@ -843,11 +816,6 @@ static int dpu_plane_atomic_check(struct drm_plane *plane,
> >>>        if (!new_plane_state->visible)
> >>>                return 0;
> >>>
> >>> -     pipe->multirect_index = DPU_SSPP_RECT_SOLO;
> >>> -     pipe->multirect_mode = DPU_SSPP_MULTIRECT_NONE;
> >>> -     r_pipe->multirect_index = DPU_SSPP_RECT_SOLO;
> >>> -     r_pipe->multirect_mode = DPU_SSPP_MULTIRECT_NONE;
> >>> -
> >>>        pstate->stage = DPU_STAGE_0 + pstate->base.normalized_zpos;
> >>>        if (pstate->stage >= pdpu->catalog->caps->max_mixer_blendstages) {
> >>>                DPU_ERROR("> %d plane stages assigned\n",
> >>> @@ -871,8 +839,6 @@ static int dpu_plane_atomic_check(struct drm_plane *plane,
> >>>                return -E2BIG;
> >>>        }
> >>>
> >>> -     fmt = msm_framebuffer_format(new_plane_state->fb);
> >>> -
> >>>        max_linewidth = pdpu->catalog->caps->max_linewidth;
> >>>
> >>>        drm_rect_rotate(&pipe_cfg->src_rect,
> >>> @@ -881,6 +847,78 @@ static int dpu_plane_atomic_check(struct drm_plane *plane,
> >>>
> >>>        if ((drm_rect_width(&pipe_cfg->src_rect) > max_linewidth) ||
> >>>             _dpu_plane_calc_clk(&crtc_state->adjusted_mode, pipe_cfg) > max_mdp_clk_rate) {
> >>> +             if (drm_rect_width(&pipe_cfg->src_rect) > 2 * max_linewidth) {
> >>> +                     DPU_DEBUG_PLANE(pdpu, "invalid src " DRM_RECT_FMT " line:%u\n",
> >>> +                                     DRM_RECT_ARG(&pipe_cfg->src_rect), max_linewidth);
> >>> +                     return -E2BIG;
> >>> +             }
> >>> +
> >>> +             *r_pipe_cfg = *pipe_cfg;
> >>> +             pipe_cfg->src_rect.x2 = (pipe_cfg->src_rect.x1 + pipe_cfg->src_rect.x2) >> 1;
> >>> +             pipe_cfg->dst_rect.x2 = (pipe_cfg->dst_rect.x1 + pipe_cfg->dst_rect.x2) >> 1;
> >>> +             r_pipe_cfg->src_rect.x1 = pipe_cfg->src_rect.x2;
> >>> +             r_pipe_cfg->dst_rect.x1 = pipe_cfg->dst_rect.x2;
> >>> +     } else {
> >>> +             memset(r_pipe_cfg, 0, sizeof(*r_pipe_cfg));
> >>> +     }
> >>> +
> >>
> >> This is the part I am not able to fully understand. Assignment of
> >> r_pipe_cfg is also pipe related so why should that move to
> >> dpu_plane_atomic_check_nopipe(). It should be part of
> >> dpu_plane_atomic_check_pipe().
> >
> > Because it happens before possible pipe / rectangle allocation. These
> > values are further used to assign resources.
> >
>
> Are you referring to SSPP allocation which happens in
> dpu_plane_virtual_assign_resources() later on?
>
> I see your point, but thats why originally I wanted to ask whether this
> should be called dpu_plane_atomic_check_nosspp() and
> dpu_plane_atomic_check_sspp() because pipe is kind of assigned either
> here or already assigned. Its the SSPP which is not.

Ack, let's rename it.

>
> >>
> >>> +     drm_rect_rotate_inv(&pipe_cfg->src_rect,
> >>> +                         new_plane_state->fb->width, new_plane_state->fb->height,
> >>> +                         new_plane_state->rotation);
> >>> +     if (r_pipe_cfg->src_rect.x1 != 0)
> >>> +             drm_rect_rotate_inv(&r_pipe_cfg->src_rect,
> >>> +                                 new_plane_state->fb->width, new_plane_state->fb->height,
> >>> +                                 new_plane_state->rotation);
> >>> +
> >>> +     pstate->needs_qos_remap = drm_atomic_crtc_needs_modeset(crtc_state);
> >>> +
> >>> +     return 0;
> >>> +}
> >>> +
> >>> +static int dpu_plane_atomic_check_pipes(struct drm_plane *plane,
> >>> +                                     struct drm_atomic_state *state,
> >>> +                                     const struct drm_crtc_state *crtc_state)
> >>> +{
> >>> +     struct drm_plane_state *new_plane_state =
> >>> +             drm_atomic_get_new_plane_state(state, plane);
> >>> +     struct dpu_plane *pdpu = to_dpu_plane(plane);
> >>> +     struct dpu_plane_state *pstate = to_dpu_plane_state(new_plane_state);
> >>> +     struct dpu_sw_pipe *pipe = &pstate->pipe;
> >>> +     struct dpu_sw_pipe *r_pipe = &pstate->r_pipe;
> >>> +     const struct msm_format *fmt;
> >>> +     struct dpu_sw_pipe_cfg *pipe_cfg = &pstate->pipe_cfg;
> >>> +     struct dpu_sw_pipe_cfg *r_pipe_cfg = &pstate->r_pipe_cfg;
> >>> +     uint32_t max_linewidth;
> >>> +     unsigned int rotation;
> >>> +     uint32_t supported_rotations;
> >>> +     const struct dpu_sspp_cfg *pipe_hw_caps;
> >>> +     const struct dpu_sspp_sub_blks *sblk;
> >>> +     int ret = 0;
> >>> +
> >>> +     pipe_hw_caps = pipe->sspp->cap;
> >>> +     sblk = pipe->sspp->cap->sblk;
> >>> +
> >>> +     /*
> >>> +      * We already have verified scaling against platform limitations.
> >>> +      * Now check if the SSPP supports scaling at all.
> >>> +      */
> >>> +     if (!sblk->scaler_blk.len &&
> >>> +         ((drm_rect_width(&new_plane_state->src) >> 16 !=
> >>> +           drm_rect_width(&new_plane_state->dst)) ||
> >>> +          (drm_rect_height(&new_plane_state->src) >> 16 !=
> >>> +           drm_rect_height(&new_plane_state->dst))))
> >>> +             return -ERANGE;
> >>> +
> >>
> >> Should this part be retained under dpu_plane_atomic_check_nopipe()?
> >>
> >> This is also not pipe dependent.
> >
> > No, it uses sblk->scaler_blk, so it depends on the actual SSPP being
> > used for this pipe.
> >
>
> Ack.
>
> >>
> >>> +     fmt = msm_framebuffer_format(new_plane_state->fb);
> >>> +
> >>> +     max_linewidth = pdpu->catalog->caps->max_linewidth;
> >>> +
> >>> +     ret = dpu_plane_atomic_check_pipe(pdpu, pipe, pipe_cfg, fmt,
> >>> +                                       &crtc_state->adjusted_mode);
> >>> +     if (ret)
> >>> +             return ret;
> >>> +
> >>> +     if (drm_rect_width(&r_pipe_cfg->src_rect) != 0) {
> >>>                /*
> >>>                 * In parallel multirect case only the half of the usual width
> >>>                 * is supported for tiled formats. If we are here, we know that
> >>> @@ -894,12 +932,6 @@ static int dpu_plane_atomic_check(struct drm_plane *plane,
> >>>                        return -E2BIG;
> >>>                }
> >>>
> >>> -             if (drm_rect_width(&pipe_cfg->src_rect) > 2 * max_linewidth) {
> >>> -                     DPU_DEBUG_PLANE(pdpu, "invalid src " DRM_RECT_FMT " line:%u\n",
> >>> -                                     DRM_RECT_ARG(&pipe_cfg->src_rect), max_linewidth);
> >>> -                     return -E2BIG;
> >>> -             }
> >>> -
> >>>                if (drm_rect_width(&pipe_cfg->src_rect) != drm_rect_width(&pipe_cfg->dst_rect) ||
> >>>                    drm_rect_height(&pipe_cfg->src_rect) != drm_rect_height(&pipe_cfg->dst_rect) ||
> >>>                    (!test_bit(DPU_SSPP_SMART_DMA_V1, &pipe->sspp->cap->features) &&
> >>> @@ -921,26 +953,6 @@ static int dpu_plane_atomic_check(struct drm_plane *plane,
> >>>                r_pipe->multirect_index = DPU_SSPP_RECT_1;
> >>>                r_pipe->multirect_mode = DPU_SSPP_MULTIRECT_PARALLEL;
> >>>
> >>> -             *r_pipe_cfg = *pipe_cfg;
> >>> -             pipe_cfg->src_rect.x2 = (pipe_cfg->src_rect.x1 + pipe_cfg->src_rect.x2) >> 1;
> >>> -             pipe_cfg->dst_rect.x2 = (pipe_cfg->dst_rect.x1 + pipe_cfg->dst_rect.x2) >> 1;
> >>> -             r_pipe_cfg->src_rect.x1 = pipe_cfg->src_rect.x2;
> >>> -             r_pipe_cfg->dst_rect.x1 = pipe_cfg->dst_rect.x2;
> >>> -     }
> >>> -
> >>> -     drm_rect_rotate_inv(&pipe_cfg->src_rect,
> >>> -                         new_plane_state->fb->width, new_plane_state->fb->height,
> >>> -                         new_plane_state->rotation);
> >>> -     if (r_pipe->sspp)
> >>> -             drm_rect_rotate_inv(&r_pipe_cfg->src_rect,
> >>> -                                 new_plane_state->fb->width, new_plane_state->fb->height,
> >>> -                                 new_plane_state->rotation);
> >>> -
> >>> -     ret = dpu_plane_atomic_check_pipe(pdpu, pipe, pipe_cfg, fmt, &crtc_state->adjusted_mode);
> >>> -     if (ret)
> >>> -             return ret;
> >>> -
> >>> -     if (r_pipe->sspp) {
> >>>                ret = dpu_plane_atomic_check_pipe(pdpu, r_pipe, r_pipe_cfg, fmt,
> >>>                                                  &crtc_state->adjusted_mode);
> >>>                if (ret)
> >>> @@ -963,11 +975,45 @@ static int dpu_plane_atomic_check(struct drm_plane *plane,
> >>>        }
> >>>
> >>>        pstate->rotation = rotation;
> >>
> >> The dpu_plane_check_inline_rotation() is also pipe independent. So even
> >> that goes to dpu_plane_atomic_check_nopipe()?
> >
> > It also depends on the sblk if I remember correctly. Also note that
> > the next patch moves it to check_pipe().
> >
>
> Ack. I checked the next change. this part is fine.
>
> >>
> >>> -     pstate->needs_qos_remap = drm_atomic_crtc_needs_modeset(crtc_state);
> >>>
> >>>        return 0;
> >>>    }
> >>>
> >>
> >> <snip>
> >>
> >
> >



-- 
With best wishes
Dmitry




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux