Re: [PATCH v5 08/12] drm/msm/dpu: split dpu_plane_atomic_check()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 6/26/2024 2:46 PM, Dmitry Baryshkov wrote:
Split dpu_plane_atomic_check() function into two pieces:

dpu_plane_atomic_check_nopipe() performing generic checks on the pstate,
without touching the associated pipe,

and

dpu_plane_atomic_check_pipes(), which takes into account used pipes.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
  drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c | 178 +++++++++++++++++++-----------
  1 file changed, 112 insertions(+), 66 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
index 115c1bd77bdd..9b9fe28052ad 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
@@ -788,49 +788,22 @@ static int dpu_plane_atomic_check_pipe(struct dpu_plane *pdpu,
  #define MAX_UPSCALE_RATIO	20
  #define MAX_DOWNSCALE_RATIO	4
-static int dpu_plane_atomic_check(struct drm_plane *plane,
-				  struct drm_atomic_state *state)
+static int dpu_plane_atomic_check_nopipe(struct drm_plane *plane,
+					 struct drm_plane_state *new_plane_state,
+					 const struct drm_crtc_state *crtc_state)
  {
-	struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state,
-										 plane);
  	int ret = 0, min_scale, max_scale;
  	struct dpu_plane *pdpu = to_dpu_plane(plane);
  	struct dpu_kms *kms = _dpu_plane_get_kms(&pdpu->base);
  	u64 max_mdp_clk_rate = kms->perf.max_core_clk_rate;
  	struct dpu_plane_state *pstate = to_dpu_plane_state(new_plane_state);
-	struct dpu_sw_pipe *pipe = &pstate->pipe;
-	struct dpu_sw_pipe *r_pipe = &pstate->r_pipe;
-	const struct drm_crtc_state *crtc_state = NULL;
-	const struct msm_format *fmt;
  	struct dpu_sw_pipe_cfg *pipe_cfg = &pstate->pipe_cfg;
  	struct dpu_sw_pipe_cfg *r_pipe_cfg = &pstate->r_pipe_cfg;
  	struct drm_rect fb_rect = { 0 };
  	uint32_t max_linewidth;
-	unsigned int rotation;
-	uint32_t supported_rotations;
-	const struct dpu_sspp_cfg *pipe_hw_caps;
-	const struct dpu_sspp_sub_blks *sblk;
-
-	if (new_plane_state->crtc)
-		crtc_state = drm_atomic_get_new_crtc_state(state,
-							   new_plane_state->crtc);
-
-	pipe->sspp = dpu_rm_get_sspp(&kms->rm, pdpu->pipe);
-	r_pipe->sspp = NULL;
- if (!pipe->sspp)
-		return -EINVAL;
-
-	pipe_hw_caps = pipe->sspp->cap;
-	sblk = pipe->sspp->cap->sblk;
-
-	if (sblk->scaler_blk.len) {
-		min_scale = FRAC_16_16(1, MAX_UPSCALE_RATIO);
-		max_scale = MAX_DOWNSCALE_RATIO << 16;
-	} else {
-		min_scale = DRM_PLANE_NO_SCALING;
-		max_scale = DRM_PLANE_NO_SCALING;
-	}
+	min_scale = FRAC_16_16(1, MAX_UPSCALE_RATIO);
+	max_scale = MAX_DOWNSCALE_RATIO << 16;
ret = drm_atomic_helper_check_plane_state(new_plane_state, crtc_state,
  						  min_scale,
@@ -843,11 +816,6 @@ static int dpu_plane_atomic_check(struct drm_plane *plane,
  	if (!new_plane_state->visible)
  		return 0;
- pipe->multirect_index = DPU_SSPP_RECT_SOLO;
-	pipe->multirect_mode = DPU_SSPP_MULTIRECT_NONE;
-	r_pipe->multirect_index = DPU_SSPP_RECT_SOLO;
-	r_pipe->multirect_mode = DPU_SSPP_MULTIRECT_NONE;
-
  	pstate->stage = DPU_STAGE_0 + pstate->base.normalized_zpos;
  	if (pstate->stage >= pdpu->catalog->caps->max_mixer_blendstages) {
  		DPU_ERROR("> %d plane stages assigned\n",
@@ -871,8 +839,6 @@ static int dpu_plane_atomic_check(struct drm_plane *plane,
  		return -E2BIG;
  	}
- fmt = msm_framebuffer_format(new_plane_state->fb);
-
  	max_linewidth = pdpu->catalog->caps->max_linewidth;
drm_rect_rotate(&pipe_cfg->src_rect,
@@ -881,6 +847,78 @@ static int dpu_plane_atomic_check(struct drm_plane *plane,
if ((drm_rect_width(&pipe_cfg->src_rect) > max_linewidth) ||
  	     _dpu_plane_calc_clk(&crtc_state->adjusted_mode, pipe_cfg) > max_mdp_clk_rate) {
+		if (drm_rect_width(&pipe_cfg->src_rect) > 2 * max_linewidth) {
+			DPU_DEBUG_PLANE(pdpu, "invalid src " DRM_RECT_FMT " line:%u\n",
+					DRM_RECT_ARG(&pipe_cfg->src_rect), max_linewidth);
+			return -E2BIG;
+		}
+
+		*r_pipe_cfg = *pipe_cfg;
+		pipe_cfg->src_rect.x2 = (pipe_cfg->src_rect.x1 + pipe_cfg->src_rect.x2) >> 1;
+		pipe_cfg->dst_rect.x2 = (pipe_cfg->dst_rect.x1 + pipe_cfg->dst_rect.x2) >> 1;
+		r_pipe_cfg->src_rect.x1 = pipe_cfg->src_rect.x2;
+		r_pipe_cfg->dst_rect.x1 = pipe_cfg->dst_rect.x2;
+	} else {
+		memset(r_pipe_cfg, 0, sizeof(*r_pipe_cfg));
+	}
+

This is the part I am not able to fully understand. Assignment of r_pipe_cfg is also pipe related so why should that move to dpu_plane_atomic_check_nopipe(). It should be part of dpu_plane_atomic_check_pipe().

+	drm_rect_rotate_inv(&pipe_cfg->src_rect,
+			    new_plane_state->fb->width, new_plane_state->fb->height,
+			    new_plane_state->rotation);
+	if (r_pipe_cfg->src_rect.x1 != 0)
+		drm_rect_rotate_inv(&r_pipe_cfg->src_rect,
+				    new_plane_state->fb->width, new_plane_state->fb->height,
+				    new_plane_state->rotation);
+
+	pstate->needs_qos_remap = drm_atomic_crtc_needs_modeset(crtc_state);
+
+	return 0;
+}
+
+static int dpu_plane_atomic_check_pipes(struct drm_plane *plane,
+					struct drm_atomic_state *state,
+					const struct drm_crtc_state *crtc_state)
+{
+	struct drm_plane_state *new_plane_state =
+		drm_atomic_get_new_plane_state(state, plane);
+	struct dpu_plane *pdpu = to_dpu_plane(plane);
+	struct dpu_plane_state *pstate = to_dpu_plane_state(new_plane_state);
+	struct dpu_sw_pipe *pipe = &pstate->pipe;
+	struct dpu_sw_pipe *r_pipe = &pstate->r_pipe;
+	const struct msm_format *fmt;
+	struct dpu_sw_pipe_cfg *pipe_cfg = &pstate->pipe_cfg;
+	struct dpu_sw_pipe_cfg *r_pipe_cfg = &pstate->r_pipe_cfg;
+	uint32_t max_linewidth;
+	unsigned int rotation;
+	uint32_t supported_rotations;
+	const struct dpu_sspp_cfg *pipe_hw_caps;
+	const struct dpu_sspp_sub_blks *sblk;
+	int ret = 0;
+
+	pipe_hw_caps = pipe->sspp->cap;
+	sblk = pipe->sspp->cap->sblk;
+
+	/*
+	 * We already have verified scaling against platform limitations.
+	 * Now check if the SSPP supports scaling at all.
+	 */
+	if (!sblk->scaler_blk.len &&
+	    ((drm_rect_width(&new_plane_state->src) >> 16 !=
+	      drm_rect_width(&new_plane_state->dst)) ||
+	     (drm_rect_height(&new_plane_state->src) >> 16 !=
+	      drm_rect_height(&new_plane_state->dst))))
+		return -ERANGE;
+

Should this part be retained under dpu_plane_atomic_check_nopipe()?

This is also not pipe dependent.

+	fmt = msm_framebuffer_format(new_plane_state->fb);
+
+	max_linewidth = pdpu->catalog->caps->max_linewidth;
+
+	ret = dpu_plane_atomic_check_pipe(pdpu, pipe, pipe_cfg, fmt,
+					  &crtc_state->adjusted_mode);
+	if (ret)
+		return ret;
+
+	if (drm_rect_width(&r_pipe_cfg->src_rect) != 0) {
  		/*
  		 * In parallel multirect case only the half of the usual width
  		 * is supported for tiled formats. If we are here, we know that
@@ -894,12 +932,6 @@ static int dpu_plane_atomic_check(struct drm_plane *plane,
  			return -E2BIG;
  		}
- if (drm_rect_width(&pipe_cfg->src_rect) > 2 * max_linewidth) {
-			DPU_DEBUG_PLANE(pdpu, "invalid src " DRM_RECT_FMT " line:%u\n",
-					DRM_RECT_ARG(&pipe_cfg->src_rect), max_linewidth);
-			return -E2BIG;
-		}
-
  		if (drm_rect_width(&pipe_cfg->src_rect) != drm_rect_width(&pipe_cfg->dst_rect) ||
  		    drm_rect_height(&pipe_cfg->src_rect) != drm_rect_height(&pipe_cfg->dst_rect) ||
  		    (!test_bit(DPU_SSPP_SMART_DMA_V1, &pipe->sspp->cap->features) &&
@@ -921,26 +953,6 @@ static int dpu_plane_atomic_check(struct drm_plane *plane,
  		r_pipe->multirect_index = DPU_SSPP_RECT_1;
  		r_pipe->multirect_mode = DPU_SSPP_MULTIRECT_PARALLEL;
- *r_pipe_cfg = *pipe_cfg;
-		pipe_cfg->src_rect.x2 = (pipe_cfg->src_rect.x1 + pipe_cfg->src_rect.x2) >> 1;
-		pipe_cfg->dst_rect.x2 = (pipe_cfg->dst_rect.x1 + pipe_cfg->dst_rect.x2) >> 1;
-		r_pipe_cfg->src_rect.x1 = pipe_cfg->src_rect.x2;
-		r_pipe_cfg->dst_rect.x1 = pipe_cfg->dst_rect.x2;
-	}
-
-	drm_rect_rotate_inv(&pipe_cfg->src_rect,
-			    new_plane_state->fb->width, new_plane_state->fb->height,
-			    new_plane_state->rotation);
-	if (r_pipe->sspp)
-		drm_rect_rotate_inv(&r_pipe_cfg->src_rect,
-				    new_plane_state->fb->width, new_plane_state->fb->height,
-				    new_plane_state->rotation);
-
-	ret = dpu_plane_atomic_check_pipe(pdpu, pipe, pipe_cfg, fmt, &crtc_state->adjusted_mode);
-	if (ret)
-		return ret;
-
-	if (r_pipe->sspp) {
  		ret = dpu_plane_atomic_check_pipe(pdpu, r_pipe, r_pipe_cfg, fmt,
  						  &crtc_state->adjusted_mode);
  		if (ret)
@@ -963,11 +975,45 @@ static int dpu_plane_atomic_check(struct drm_plane *plane,
  	}
pstate->rotation = rotation;

The dpu_plane_check_inline_rotation() is also pipe independent. So even that goes to dpu_plane_atomic_check_nopipe()?

-	pstate->needs_qos_remap = drm_atomic_crtc_needs_modeset(crtc_state);
return 0;
  }

<snip>





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux