Re: [PATCH 1/3] arm64: dts: qcom: sc8280xp-crd: enable wifi

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 22.08.2024 4:56 PM, Johan Hovold wrote:
> On Tue, Aug 13, 2024 at 09:06:36PM +0200, Bartosz Golaszewski wrote:
>> From: Konrad Dybcio <konradybcio@xxxxxxxxxx>
>>
>> Add nodes for the WCN6855 PMU, the WLAN module and relevant regulators
>> and pin functions to enable wifi support on sc8280xp-crd.
> 
> What are you guys smoking? The Wi-Fi has been enabled on the CRD since
> 6.2 and commit d907fe5acbf1 ("arm64: dts: qcom: sc8280xp-crd: enable
> WiFi controller").

Smells like copypasta..

> 
>> Signed-off-by: Konrad Dybcio <konradybcio@xxxxxxxxxx>
>> [Bartosz:
>>   - write the commit message,
>>   - rebase Konrad's commit,
>>   - fix one of the supplies' name]
>> Co-developed-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
>> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
>> ---
>>  arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 112 ++++++++++++++++++++++
>>  1 file changed, 112 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
>> index 6020582b0a59..57efeefbc89e 100644
>> --- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
>> +++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
>> @@ -177,6 +177,17 @@ vreg_misc_3p3: regulator-misc-3p3 {
>>  		regulator-always-on;
>>  	};
>>  
>> +	vreg_s10b: regulator-s10b {
>> +		compatible = "regulator-fixed";
> 
> I don't think this is a fixed regulator.

It effectively is

> 
>> +
>> +		regulator-name = "VREG_S10B";
>> +		regulator-min-microvolt = <1800000>;
>> +		regulator-max-microvolt = <1800000>;
>> +
>> +		regulator-always-on;
>> +		regulator-boot-on;
>> +	};
>> +
>>  	vreg_wlan: regulator-wlan {
>>  		compatible = "regulator-fixed";
>>  
>  
>> +&pcie4_port0 {
>> +	wifi@0 {
>> +		compatible = "pci17cb,1103";
>> +		reg = <0x10000 0x0 0x0 0x0 0x0>;
>> +
>> +		vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>;
>> +		vddaon-supply = <&vreg_pmu_aon_0p8>;
>> +		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
>> +		vddwlmx-supply = <&vreg_pmu_wlmx_0p8>;
>> +		vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
>> +		vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
>> +		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
>> +		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
>> +		vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>;
>> +
>> +		qcom,ath11k-calibration-variant = "LE_X13S";
> 
> This is not the right calibration variant either. In fact, Qualcomm has
> not yet released any calibration data for this CRD yet:
> 
> 	https://bugzilla.kernel.org/show_bug.cgi?id=216036
> 
> I use a patch like this locally, but we shouldn't merge this upstream.

Agreed

>  
>> +	wlan_en: wlan-en-state {
>> +		pins = "gpio134";
>> +		function = "gpio";
>> +		drive-strength = <8>;
> 
> Why increase the drive strength?

This is what's used on Windows, for lack of a better idea, not sure
if this is actually necessary

Konrad




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux