The pipediv2_clk's source from the same mux as pipe clock. So they have
same limitation, which is that the PHY sequence requires to enable these
local CBCs before the PHY is actually outputting a clock to them. This
means the clock won't actually turn on when we vote them. Hence, let's
skip the halt bit check of the pipediv2_clk, otherwise pipediv2_clk may
stuck at off state during bootup.
Suggested-by: Mike Tipton <quic_mdtipton@xxxxxxxxxxx>
Signed-off-by: Qiang Yu <quic_qianyu@xxxxxxxxxxx>
---
drivers/clk/qcom/gcc-x1e80100.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/clk/qcom/gcc-x1e80100.c b/drivers/clk/qcom/gcc-x1e80100.c
index 80e90e31be33..ad35a8c37ca8 100644
--- a/drivers/clk/qcom/gcc-x1e80100.c
+++ b/drivers/clk/qcom/gcc-x1e80100.c
@@ -3123,7 +3123,7 @@ static struct clk_branch gcc_pcie_3_pipe_clk = {
static struct clk_branch gcc_pcie_3_pipediv2_clk = {
.halt_reg = 0x58060,
- .halt_check = BRANCH_HALT_VOTED,
+ .halt_check = BRANCH_HALT_SKIP,
.clkr = {
.enable_reg = 0x52020,
.enable_mask = BIT(5),
@@ -3248,7 +3248,7 @@ static struct clk_branch gcc_pcie_4_pipe_clk = {
static struct clk_branch gcc_pcie_4_pipediv2_clk = {
.halt_reg = 0x6b054,
- .halt_check = BRANCH_HALT_VOTED,
+ .halt_check = BRANCH_HALT_SKIP,
.clkr = {
.enable_reg = 0x52010,
.enable_mask = BIT(27),
@@ -3373,7 +3373,7 @@ static struct clk_branch gcc_pcie_5_pipe_clk = {
static struct clk_branch gcc_pcie_5_pipediv2_clk = {
.halt_reg = 0x2f054,
- .halt_check = BRANCH_HALT_VOTED,
+ .halt_check = BRANCH_HALT_SKIP,
.clkr = {
.enable_reg = 0x52018,
.enable_mask = BIT(19),
@@ -3511,7 +3511,7 @@ static struct clk_branch gcc_pcie_6a_pipe_clk = {
static struct clk_branch gcc_pcie_6a_pipediv2_clk = {
.halt_reg = 0x31060,
- .halt_check = BRANCH_HALT_VOTED,
+ .halt_check = BRANCH_HALT_SKIP,
.clkr = {
.enable_reg = 0x52018,
.enable_mask = BIT(28),
@@ -3649,7 +3649,7 @@ static struct clk_branch gcc_pcie_6b_pipe_clk = {
static struct clk_branch gcc_pcie_6b_pipediv2_clk = {
.halt_reg = 0x8d060,
- .halt_check = BRANCH_HALT_VOTED,
+ .halt_check = BRANCH_HALT_SKIP,
.clkr = {
.enable_reg = 0x52010,
.enable_mask = BIT(28),
--
2.34.1
