Re: [PATCH v2 2/2] clk: qcom: Add support for Global Clock Controller on QCS8300

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> +static int gcc_qcs8300_probe(struct platform_device *pdev)
> +{
> +	struct regmap *regmap;
> +	int ret;
> +
> +	regmap = qcom_cc_map(pdev, &gcc_qcs8300_desc);
> +	if (IS_ERR(regmap))
> +		return PTR_ERR(regmap);
> +
> +	ret = qcom_cc_register_rcg_dfs(regmap, gcc_dfs_clocks,
> +				       ARRAY_SIZE(gcc_dfs_clocks));
> +	if (ret)
> +		return ret;
> +
> +	/* Keep some clocks always enabled */

Sorry, but you need to explain why. Why cannot the camera driver
enable these clocks when it loads? Why cannot the display driver
enable these clocks when it loads.

	Andrew




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux