Re: [PATCH v2 2/3] usb: typec: ucsi: Move unregister out of atomic section

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Aug 19, 2024 at 01:07:46PM -0700, Bjorn Andersson wrote:
> Commit '635ce0db8956 ("soc: qcom: pmic_glink: don't traverse clients

Looks like you copied the wrong SHA again. This should be

	9329933699b3 ("soc: qcom: pmic_glink: Make client-lock non-sleeping")

as we discussed.

> list without a lock")' moved the pmic_glink client list under a
> spinlock, as it is accessed by the rpmsg/glink callback, which in turn
> is invoked from IRQ context.
> 
> This means that ucsi_unregister() is now called from IRQ context, which

And this should be "atomic context" as pdr notifications are done from
a worker thread.

> isn't feasible as it's expecting a sleepable context. An effort is under
> way to get GLINK to invoke its callbacks in a sleepable context, but
> until then lets schedule the unregistration.
> 
> A side effect of this is that ucsi_unregister() can now happen
> after the remote processor, and thereby the communication link with it, is
> gone. pmic_glink_send() is amended with a check to avoid the resulting NULL
> pointer dereference.
> This does however result in the user being informed about this error by
> the following entry in the kernel log:
> 
>   ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: failed to send UCSI write request: -5
> 
> Fixes: 635ce0db8956 ("soc: qcom: pmic_glink: don't traverse clients list without a lock")

Fixes: 9329933699b3 ("soc: qcom: pmic_glink: Make client-lock non-sleeping")

> Cc: stable@xxxxxxxxxxxxxxx
> Reviewed-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
> Reviewed-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> Tested-by: Amit Pundir <amit.pundir@xxxxxxxxxx>
> Signed-off-by: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>

> @@ -269,11 +284,12 @@ static void pmic_glink_ucsi_callback(const void *data, size_t len, void *priv)
>  static void pmic_glink_ucsi_pdr_notify(void *priv, int state)
>  {
>  	struct pmic_glink_ucsi *ucsi = priv;
> +	unsigned long flags;
>  
> -	if (state == SERVREG_SERVICE_STATE_UP)
> -		schedule_work(&ucsi->register_work);
> -	else if (state == SERVREG_SERVICE_STATE_DOWN)
> -		ucsi_unregister(ucsi->ucsi);
> +	spin_lock_irqsave(&ucsi->state_lock, flags);
> +	ucsi->pd_running = state == SERVREG_SERVICE_STATE_UP;

Add parentheses for readability?

> +	spin_unlock_irqrestore(&ucsi->state_lock, flags);
> +	schedule_work(&ucsi->register_work);
>  }
>  
>  static void pmic_glink_ucsi_destroy(void *data)
> @@ -320,6 +336,7 @@ static int pmic_glink_ucsi_probe(struct auxiliary_device *adev,
>  	INIT_WORK(&ucsi->register_work, pmic_glink_ucsi_register);
>  	init_completion(&ucsi->read_ack);
>  	init_completion(&ucsi->write_ack);
> +	spin_lock_init(&ucsi->state_lock);
>  	mutex_init(&ucsi->lock);
>  
>  	ucsi->ucsi = ucsi_create(dev, &pmic_glink_ucsi_ops);

Looks good otherwise:

Reviewed-by: Johan Hovold <johan+linaro@xxxxxxxxxx>

Johan




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux