[PATCH v2 3/3] soc: qcom: pmic_glink: Actually communicate with remote goes down

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



When the pmic_glink state is UP and we either receive a protection-
domain (PD) notification indicating that the PD is going down, or that
the whole remoteproc is going down, it's expected that the pmic_glink
client instances are notified that their function has gone DOWN.

This is not what the code does, which results in the client state either
not updating, or being wrong in many cases. So let's fix the conditions.

Fixes: 58ef4ece1e41 ("soc: qcom: pmic_glink: Introduce base PMIC GLINK driver")
Cc: stable@xxxxxxxxxxxxxxx
Reviewed-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
Reviewed-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
Tested-by: Amit Pundir <amit.pundir@xxxxxxxxxx>
Signed-off-by: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
---
 drivers/soc/qcom/pmic_glink.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/soc/qcom/pmic_glink.c b/drivers/soc/qcom/pmic_glink.c
index e4747f1d3da5..cb202a37e8ab 100644
--- a/drivers/soc/qcom/pmic_glink.c
+++ b/drivers/soc/qcom/pmic_glink.c
@@ -191,7 +191,7 @@ static void pmic_glink_state_notify_clients(struct pmic_glink *pg)
 		if (pg->pdr_state == SERVREG_SERVICE_STATE_UP && pg->ept)
 			new_state = SERVREG_SERVICE_STATE_UP;
 	} else {
-		if (pg->pdr_state == SERVREG_SERVICE_STATE_UP && pg->ept)
+		if (pg->pdr_state == SERVREG_SERVICE_STATE_DOWN || !pg->ept)
 			new_state = SERVREG_SERVICE_STATE_DOWN;
 	}
 

-- 
2.34.1





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux