Add an adreno-smmu-priv interface for drm/msm to call
into arm-smmu-qcom and initiate the PRR bit setup or reset
sequence as per request.
This will be used by GPU to setup the PRR bit and related
configuration registers through adreno-smmu private
interface instead of directly poking the smmu hardware.
Suggested-by: Rob Clark <robdclark@xxxxxxxxx>
Signed-off-by: Bibek Kumar Patro <quic_bibekkum@xxxxxxxxxxx>
---
drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 37 ++++++++++++++++++++++
drivers/iommu/arm/arm-smmu/arm-smmu.h | 2 ++
include/linux/adreno-smmu-priv.h | 10 +++++-
3 files changed, 48 insertions(+), 1 deletion(-)
diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
index a776c7906c76..f62e20d472d3 100644
--- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
+++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
@@ -30,6 +30,7 @@
#define PREFETCH_SHALLOW (1 << PREFETCH_SHIFT)
#define PREFETCH_MODERATE (2 << PREFETCH_SHIFT)
#define PREFETCH_DEEP (3 << PREFETCH_SHIFT)
+#define GFX_ACTLR_PRR (1 << 5)
static const struct actlr_config sc7280_apps_actlr_cfg[] = {
{ 0x0800, 0x04e0, PREFETCH_DEFAULT | CMTLB },
@@ -237,6 +238,40 @@ static void qcom_adreno_smmu_resume_translation(const void *cookie, bool termina
arm_smmu_cb_write(smmu, cfg->cbndx, ARM_SMMU_CB_RESUME, reg);
}
+static void qcom_adreno_smmu_set_prr_bit(const void *cookie, bool set)
+{
+ struct arm_smmu_domain *smmu_domain = (void *)cookie;
+ struct arm_smmu_device *smmu = smmu_domain->smmu;
+ const struct device_node *np = smmu->dev->of_node;
+ struct arm_smmu_cfg *cfg = &smmu_domain->cfg;
+ u32 reg = 0;
+
+ if (of_device_is_compatible(np, "qcom,smmu-500") &&
+ of_device_is_compatible(np, "qcom,adreno-smmu")) {
+ reg = arm_smmu_cb_read(smmu, cfg->cbndx, ARM_SMMU_CB_ACTLR);
+ reg &= ~GFX_ACTLR_PRR;
+ if (set)
+ reg |= FIELD_PREP(GFX_ACTLR_PRR, 1);
+ arm_smmu_cb_write(smmu, cfg->cbndx, ARM_SMMU_CB_ACTLR, reg);
+ }
+}
+
+static void qcom_adreno_smmu_set_prr_addr(const void *cookie, phys_addr_t page_addr)
+{
+ struct arm_smmu_domain *smmu_domain = (void *)cookie;
+ struct arm_smmu_device *smmu = smmu_domain->smmu;
+ const struct device_node *np = smmu->dev->of_node;
+
+ if (of_device_is_compatible(np, "qcom,smmu-500") &&
+ of_device_is_compatible(np, "qcom,adreno-smmu")) {
+ writel_relaxed(lower_32_bits(page_addr),
+ (void *)smmu->ioaddr + ARM_SMMU_GFX_PRR_CFG_LADDR);
+
+ writel_relaxed(upper_32_bits(page_addr),
+ (void *)smmu->ioaddr + ARM_SMMU_GFX_PRR_CFG_UADDR);
+ }
+}
+
#define QCOM_ADRENO_SMMU_GPU_SID 0
static bool qcom_adreno_smmu_is_gpu_device(struct device *dev)
@@ -410,6 +445,8 @@ static int qcom_adreno_smmu_init_context(struct arm_smmu_domain *smmu_domain,
priv->get_fault_info = qcom_adreno_smmu_get_fault_info;
priv->set_stall = qcom_adreno_smmu_set_stall;
priv->resume_translation = qcom_adreno_smmu_resume_translation;
+ priv->set_prr_bit = qcom_adreno_smmu_set_prr_bit;
+ priv->set_prr_addr = qcom_adreno_smmu_set_prr_addr;
actlrvar = qsmmu->data->actlrvar;
if (!actlrvar)
diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu.h b/drivers/iommu/arm/arm-smmu/arm-smmu.h
index 172f1b56b879..b3f5ff1ebb8d 100644
--- a/drivers/iommu/arm/arm-smmu/arm-smmu.h
+++ b/drivers/iommu/arm/arm-smmu/arm-smmu.h
@@ -154,6 +154,8 @@ enum arm_smmu_cbar_type {
#define ARM_SMMU_SCTLR_M BIT(0)
#define ARM_SMMU_CB_ACTLR 0x4
+#define ARM_SMMU_GFX_PRR_CFG_LADDR 0x6008
+#define ARM_SMMU_GFX_PRR_CFG_UADDR 0x600C
#define ARM_SMMU_CB_RESUME 0x8
#define ARM_SMMU_RESUME_TERMINATE BIT(0)
diff --git a/include/linux/adreno-smmu-priv.h b/include/linux/adreno-smmu-priv.h
index c637e0997f6d..03466eb16933 100644
--- a/include/linux/adreno-smmu-priv.h
+++ b/include/linux/adreno-smmu-priv.h
@@ -49,7 +49,13 @@ struct adreno_smmu_fault_info {
* before set_ttbr0_cfg(). If stalling on fault is enabled,
* the GPU driver must call resume_translation()
* @resume_translation: Resume translation after a fault
- *
+ * @set_prr_bit: Extendible interface to be used by GPU to modify the
+ * ACTLR register bits, currently used to configure
+ * Partially-Resident-Region (PRR) bit for feature's
+ * setup and reset sequence as requested.
+ * @set_prr_addr: Configure the PRR_CFG_*ADDR register with the
+ * physical address of PRR page passed from
+ * GPU driver.
*
* The GPU driver (drm/msm) and adreno-smmu work together for controlling
* the GPU's SMMU instance. This is by necessity, as the GPU is directly
@@ -67,6 +73,8 @@ struct adreno_smmu_priv {
void (*get_fault_info)(const void *cookie, struct adreno_smmu_fault_info *info);
void (*set_stall)(const void *cookie, bool enabled);
void (*resume_translation)(const void *cookie, bool terminate);
+ void (*set_prr_bit)(const void *cookie, bool set);
+ void (*set_prr_addr)(const void *cookie, phys_addr_t page_addr);
};
#endif /* __ADRENO_SMMU_PRIV_H */
--
2.34.1
