Re: [PATCH 3/4] arm64: dts: qcom: qcm6490-idp: Update protected clocks list

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 6/10/2024 11:51 PM, Dmitry Baryshkov wrote:
On Mon, Jun 10, 2024 at 03:57:34PM +0530, Taniya Das wrote:


On 5/31/2024 5:34 PM, Dmitry Baryshkov wrote:
On Fri, May 31, 2024 at 03:52:51PM +0530, Taniya Das wrote:
Certain clocks are not accessible on QCM6490-IDP board,
thus mark them as protected. Update the lpassaudio node to
support the new compatible as the lpassaudio needs to support
the reset functionality on the QCM6490 board and the rest of
the Audio functionality would be provided from the LPASS
firmware.

Signed-off-by: Taniya Das <quic_tdas@xxxxxxxxxxx>
---
   arch/arm64/boot/dts/qcom/qcm6490-idp.dts | 28 +++++++++++++++++++++++-
   1 file changed, 27 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
index a0668f767e4b..4eece564331a 100644
--- a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
+++ b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
@@ -1,6 +1,6 @@
   // SPDX-License-Identifier: BSD-3-Clause
   /*
- * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2023-2024 Qualcomm Innovation Center, Inc. All rights reserved.
    */
   /dts-v1/;
@@ -688,3 +688,29 @@
   &wifi {
   	memory-region = <&wlan_fw_mem>;
   };
+
+&gcc {
+	protected-clocks = <GCC_AGGRE_NOC_PCIE_1_AXI_CLK> ,<GCC_PCIE_1_AUX_CLK>,
+			<GCC_PCIE_1_AUX_CLK_SRC>, <GCC_PCIE_1_CFG_AHB_CLK>,
+			<GCC_PCIE_1_MSTR_AXI_CLK>, <GCC_PCIE_1_PHY_RCHNG_CLK_SRC>,
+			<GCC_PCIE_1_PIPE_CLK>, <GCC_PCIE_1_PIPE_CLK_SRC>,
+			<GCC_PCIE_1_SLV_AXI_CLK>, <GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
+			<GCC_QSPI_CNOC_PERIPH_AHB_CLK>, <GCC_QSPI_CORE_CLK>,
+			<GCC_QSPI_CORE_CLK_SRC>,<GCC_USB30_SEC_MASTER_CLK>,
+			<GCC_USB30_SEC_MASTER_CLK_SRC>, <GCC_USB30_SEC_MOCK_UTMI_CLK>,
+			<GCC_USB30_SEC_MOCK_UTMI_CLK_SRC>,
+			<GCC_USB30_SEC_MOCK_UTMI_POSTDIV_CLK_SRC>, <GCC_USB30_SEC_SLEEP_CLK>,
+			<GCC_USB3_SEC_PHY_AUX_CLK>, <GCC_USB3_SEC_PHY_AUX_CLK_SRC>,
+			<GCC_USB3_SEC_PHY_COM_AUX_CLK>, <GCC_USB3_SEC_PHY_PIPE_CLK>,
+			<GCC_USB3_SEC_PHY_PIPE_CLK_SRC>, <GCC_CFG_NOC_LPASS_CLK>,
+			<GCC_MSS_GPLL0_MAIN_DIV_CLK_SRC>, <GCC_MSS_CFG_AHB_CLK>,
+			<GCC_MSS_OFFLINE_AXI_CLK>, <GCC_MSS_SNOC_AXI_CLK>,
+			<GCC_MSS_Q6_MEMNOC_AXI_CLK>, <GCC_MSS_Q6SS_BOOT_CLK_SRC>,
+			<GCC_SEC_CTRL_CLK_SRC>, <GCC_WPSS_AHB_CLK>,
+			<GCC_WPSS_AHB_BDG_MST_CLK>, <GCC_WPSS_RSCP_CLK>;

Is there any reason why this list is significantly larger than a list
for RB3g2 or FP5?


Unfortunately these are all protected on the IDP board and any access would
cause a NoC error and then board will fail to boot up.

Why? I mean, why does it contain the clocks that are allowed to be
touched on RB3g2 and FP5?


There are some use case level and board functionality changes between RB3g2/FP5 vs IDP. Thus these clocks are protected and cannot be accessed.

--
Thanks & Regards,
Taniya Das.




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux