Re: [PATCH 6/8] usb: misc: eud: Add High-Speed Phy control for EUD operations

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 01/08/2024 00:38, Elson Serrao wrote:
> 
> 
> On 7/30/2024 10:39 PM, Krzysztof Kozlowski wrote:
>> On 31/07/2024 00:24, Elson Roy Serrao wrote:
>>> The Embedded USB Debugger(EUD) is a HS-USB on-chip hub to support the
>>> debug and trace capabilities on Qualcomm devices. It is physically
>>> present in between the usb connector and the usb controller. Being a
>>> HS USB hub, it relies on HS Phy for its functionality. Add HS phy
>>> support in the eud driver and control the phy during eud enable/disable
>>> operations.
>>>
>>
>> ...
>>>  static ssize_t enable_show(struct device *dev,
>>> @@ -186,6 +216,11 @@ static int eud_probe(struct platform_device *pdev)
>>>  
>>>  	chip->dev = &pdev->dev;
>>>  
>>> +	chip->usb2_phy = devm_phy_get(chip->dev, "usb2-phy");
>>> +	if (IS_ERR(chip->usb2_phy))
>>> +		return dev_err_probe(chip->dev, PTR_ERR(chip->usb2_phy),
>>> +				     "no usb2 phy configured\n");
>>
>> This nicely breaks all users.
>>
>> NAK
>>
> 
> As per my comment in [patch 1/8], phy would be a required property and hence I will first modify
> and enable EUD on the existing user (sc7280 SoC) and then extend this to other users.

NAK, you break existing users without clear reason.

Best regards,
Krzysztof





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux