On Thu, Apr 14, 2016 at 03:01:49PM +0530, Rajendra Nayak wrote:
> TSENS is Qualcomms' thermal temperature sensor device. It
> supports reading temperatures from multiple thermal sensors
> present on various QCOM SoCs.
> Calibration data is generally read from a non-volatile memory
> (eeprom) device.
>
> Add a skeleton driver with all the necessary abstractions so
> a variety of qcom device families which support TSENS can
> add driver extensions.
>
> Also add the required device tree bindings which can be used
> to describe the TSENS device in DT.
>
> Signed-off-by: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
> Reviewed-by: Lina Iyer <lina.iyer@xxxxxxxxxx>
> ---
> .../devicetree/bindings/thermal/qcom-tsens.txt | 21 +++
> drivers/thermal/Kconfig | 5 +
> drivers/thermal/Makefile | 1 +
> drivers/thermal/qcom/Kconfig | 11 ++
> drivers/thermal/qcom/Makefile | 2 +
> drivers/thermal/qcom/tsens-common.c | 135 ++++++++++++++
> drivers/thermal/qcom/tsens.c | 202 +++++++++++++++++++++
> drivers/thermal/qcom/tsens.h | 90 +++++++++
> 8 files changed, 467 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/thermal/qcom-tsens.txt
> create mode 100644 drivers/thermal/qcom/Kconfig
> create mode 100644 drivers/thermal/qcom/Makefile
> create mode 100644 drivers/thermal/qcom/tsens-common.c
> create mode 100644 drivers/thermal/qcom/tsens.c
> create mode 100644 drivers/thermal/qcom/tsens.h
>
> diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
> new file mode 100644
> index 0000000..292ed89
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
> @@ -0,0 +1,21 @@
> +* QCOM SoC Temperature Sensor (TSENS)
> +
> +Required properties:
> +- compatible :
> + - "qcom,msm8916-tsens" : For 8916 Family of SoCs
> + - "qcom,msm8974-tsens" : For 8974 Family of SoCs
> + - "qcom,msm8996-tsens" : For 8996 Family of SoCs
> +
> +- reg: Address range of the thermal registers
> +- #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description.
> +- Refer to Documentation/devicetree/bindings/nvmem/nvmem.txt to know how to specify
> +nvmem cells
> +
> +Example:
> +tsens: thermal-sensor@900000 {
> + compatible = "qcom,msm8916-tsens";
> + reg = <0x4a8000 0x2000>;
> + nvmem-cells = <&tsens_caldata>, <&tsens_calsel>;
> + nvmem-cell-names = "caldata", "calsel";
> + #thermal-sensor-cells = <1>;
> + };
> diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
> index c37eedc..463b00c 100644
> --- a/drivers/thermal/Kconfig
> +++ b/drivers/thermal/Kconfig
> @@ -408,4 +408,9 @@ config QCOM_SPMI_TEMP_ALARM
> real time die temperature if an ADC is present or an estimate of the
> temperature based upon the over temperature stage value.
>
> +menu "Qualcomm thermal drivers"
> +depends on (ARCH_QCOM && OF) || COMPILE_TEST
> +source "drivers/thermal/qcom/Kconfig"
> +endmenu
> +
> endif
> diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
> index 8e9cbc3..3f3e72c 100644
> --- a/drivers/thermal/Makefile
> +++ b/drivers/thermal/Makefile
> @@ -46,6 +46,7 @@ obj-$(CONFIG_TI_SOC_THERMAL) += ti-soc-thermal/
> obj-$(CONFIG_INT340X_THERMAL) += int340x_thermal/
> obj-$(CONFIG_INTEL_PCH_THERMAL) += intel_pch_thermal.o
> obj-$(CONFIG_ST_THERMAL) += st/
> +obj-$(CONFIG_QCOM_TSENS) += qcom/
> obj-$(CONFIG_TEGRA_SOCTHERM) += tegra_soctherm.o
> obj-$(CONFIG_HISI_THERMAL) += hisi_thermal.o
> obj-$(CONFIG_MTK_THERMAL) += mtk_thermal.o
> diff --git a/drivers/thermal/qcom/Kconfig b/drivers/thermal/qcom/Kconfig
> new file mode 100644
> index 0000000..be32e5a
> --- /dev/null
> +++ b/drivers/thermal/qcom/Kconfig
> @@ -0,0 +1,11 @@
> +config QCOM_TSENS
> + tristate "Qualcomm TSENS Temperature Alarm"
> + depends on THERMAL
> + depends on QCOM_QFPROM
> + depends on ARCH_QCOM || COMPILE_TEST
> + help
> + This enables the thermal sysfs driver for the TSENS device. It shows
> + up in Sysfs as a thermal zone with multiple trip points. Disabling the
> + thermal zone device via the mode file results in disabling the sensor.
> + Also able to set threshold temperature for both hot and cold and update
> + when a threshold is reached.
> diff --git a/drivers/thermal/qcom/Makefile b/drivers/thermal/qcom/Makefile
> new file mode 100644
> index 0000000..2e800c5
> --- /dev/null
> +++ b/drivers/thermal/qcom/Makefile
> @@ -0,0 +1,2 @@
> +obj-$(CONFIG_QCOM_TSENS) += qcom_tsens.o
> +qcom_tsens-y += tsens.o tsens-common.o
> diff --git a/drivers/thermal/qcom/tsens-common.c b/drivers/thermal/qcom/tsens-common.c
> new file mode 100644
> index 0000000..4bffbc1
> --- /dev/null
> +++ b/drivers/thermal/qcom/tsens-common.c
> @@ -0,0 +1,135 @@
> +/*
> + * Copyright (c) 2015, The Linux Foundation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/nvmem-consumer.h>
> +#include <linux/of_address.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include "tsens.h"
> +
> +#define S0_ST_ADDR 0x1030
> +#define SN_ADDR_OFFSET 0x4
> +#define SN_ST_TEMP_MASK 0x3ff
> +#define CAL_DEGC_PT1 30
> +#define CAL_DEGC_PT2 120
> +#define SLOPE_FACTOR 1000
> +#define SLOPE_DEFAULT 3200
> +
> +char *qfprom_read(struct device *dev, const char *cname)
> +{
> + struct nvmem_cell *cell;
> + ssize_t data;
> + char *ret;
> +
> + cell = nvmem_cell_get(dev, cname);
> + if (IS_ERR(cell))
> + return ERR_CAST(cell);
> +
> + ret = nvmem_cell_read(cell, &data);
> + nvmem_cell_put(cell);
> +
> + return ret;
> +}
> +
> +void compute_intercept_slope(struct tsens_device *tmdev, u32 *p1,
> + u32 *p2, u32 mode)
> +{
Could you please add a comment explaining the cases that this function
is used instead of tz->tzp->slope,offset?
> + int i;
> + int num, den;
> +
> + for (i = 0; i < tmdev->num_sensors; i++) {
> + dev_dbg(tmdev->dev,
> + "sensor%d - data_point1:%#x data_point2:%#x\n",
> + i, p1[i], p2[i]);
> +
> + tmdev->sensor[i].slope = SLOPE_DEFAULT;
> + if (mode == TWO_PT_CALIB) {
> + /*
> + * slope (m) = adc_code2 - adc_code1 (y2 - y1)/
> + * temp_120_degc - temp_30_degc (x2 - x1)
> + */
> + num = p2[i] - p1[i];
> + num *= SLOPE_FACTOR;
> + den = CAL_DEGC_PT2 - CAL_DEGC_PT1;
> + tmdev->sensor[i].slope = num / den;
> + }
> +
> + tmdev->sensor[i].offset = (p1[i] * SLOPE_FACTOR) -
> + (CAL_DEGC_PT1 *
> + tmdev->sensor[i].slope);
> + dev_dbg(tmdev->dev, "offset:%d\n", tmdev->sensor[i].offset);
> + }
> +}
> +
> +static inline int code_to_degc(u32 adc_code, const struct tsens_sensor *s)
> +{
> + int degc, num, den;
> +
> + num = (adc_code * SLOPE_FACTOR) - s->offset;
> + den = s->slope;
> +
> + if (num > 0)
> + degc = num + (den / 2);
> + else if (num < 0)
> + degc = num - (den / 2);
> + else
> + degc = num;
> +
> + degc /= den;
> +
> + return degc;
> +}
> +
> +int get_temp_common(struct tsens_device *tmdev, int id, int *temp)
> +{
> + struct tsens_sensor *s = &tmdev->sensor[id];
> + u32 code;
> + unsigned int sensor_addr;
> + int last_temp = 0, ret;
> +
> + sensor_addr = S0_ST_ADDR + s->hw_id * SN_ADDR_OFFSET;
> + ret = regmap_read(tmdev->map, sensor_addr, &code);
> + if (ret)
> + return ret;
> + last_temp = code & SN_ST_TEMP_MASK;
> +
> + *temp = code_to_degc(last_temp, s) * 1000;
> +
> + return 0;
> +}
> +
> +static const struct regmap_config tsens_config = {
> + .reg_bits = 32,
> + .val_bits = 32,
> + .reg_stride = 4,
> +};
> +
> +int __init init_common(struct tsens_device *tmdev)
> +{
> + void __iomem *base;
> +
> + base = of_iomap(tmdev->dev->of_node, 0);
> + if (IS_ERR(base))
> + return -EINVAL;
> +
> + tmdev->map = devm_regmap_init_mmio(tmdev->dev, base, &tsens_config);
> + if (!tmdev->map) {
> + iounmap(base);
> + return -ENODEV;
> + }
> +
> + return 0;
> +}
> diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
> new file mode 100644
> index 0000000..e799182
> --- /dev/null
> +++ b/drivers/thermal/qcom/tsens.c
> @@ -0,0 +1,202 @@
> +/*
> + * Copyright (c) 2015, The Linux Foundation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#include <linux/err.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm.h>
> +#include <linux/slab.h>
> +#include <linux/thermal.h>
> +#include "tsens.h"
> +
> +static int tsens_get_temp(void *data, int *temp)
> +{
> + const struct tsens_sensor *s = data;
> + struct tsens_device *tmdev = s->tmdev;
> +
> + return tmdev->ops->get_temp(tmdev, s->id, temp);
> +}
> +
> +static int tsens_get_trend(void *data, long *temp)
> +{
> + const struct tsens_sensor *s = data;
> + struct tsens_device *tmdev = s->tmdev;
> +
> + if (tmdev->ops->get_trend)
> + return tmdev->ops->get_trend(tmdev, s->id, temp);
> +
> + return -ENOTSUPP;
> +}
> +
> +static int tsens_suspend(struct device *dev)
> +{
> + struct tsens_device *tmdev = dev_get_drvdata(dev);
> +
> + if (tmdev->ops && tmdev->ops->suspend)
> + return tmdev->ops->suspend(tmdev);
> +
> + return 0;
> +}
> +
> +static int tsens_resume(struct device *dev)
> +{
> + struct tsens_device *tmdev = dev_get_drvdata(dev);
> +
> + if (tmdev->ops && tmdev->ops->resume)
> + return tmdev->ops->resume(tmdev);
> +
> + return 0;
> +}
> +
> +static SIMPLE_DEV_PM_OPS(tsens_pm_ops, tsens_suspend, tsens_resume);
> +
> +static const struct of_device_id tsens_table[] = {
> + {
> + .compatible = "qcom,msm8916-tsens",
> + }, {
> + .compatible = "qcom,msm8974-tsens",
> + },
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, tsens_table);
> +
> +static const struct thermal_zone_of_device_ops tsens_of_ops = {
> + .get_temp = tsens_get_temp,
> + .get_trend = tsens_get_trend,
> +};
> +
> +static int tsens_register(struct tsens_device *tmdev)
> +{
> + int i;
> + struct thermal_zone_device *tzd;
> + u32 *hw_id, n = tmdev->num_sensors;
> +
> + hw_id = devm_kcalloc(tmdev->dev, n, sizeof(u32), GFP_KERNEL);
> + if (!hw_id)
> + return -ENOMEM;
> +
> + for (i = 0; i < tmdev->num_sensors; i++) {
> + tmdev->sensor[i].tmdev = tmdev;
> + tmdev->sensor[i].id = i;
> + tzd = thermal_zone_of_sensor_register(tmdev->dev, i,
> + &tmdev->sensor[i],
> + &tsens_of_ops);
How about using the devm_ version of this API?
> + if (IS_ERR(tzd))
> + continue;
> + tmdev->sensor[i].tzd = tzd;
> + if (tmdev->ops->enable)
> + tmdev->ops->enable(tmdev, i);
> + }
> + return 0;
> +}
> +
> +static int tsens_probe(struct platform_device *pdev)
> +{
> + int ret, i;
> + struct device *dev;
> + struct device_node *np;
> + struct tsens_sensor *s;
> + struct tsens_device *tmdev;
> + const struct tsens_data *data;
> + const struct of_device_id *id;
> +
> + if (pdev->dev.of_node)
> + dev = &pdev->dev;
> + else
> + dev = pdev->dev.parent;
> +
> + np = dev->of_node;
> +
> + id = of_match_node(tsens_table, np);
> + if (!id)
> + return -EINVAL;
> +
> + data = id->data;
> +
> + if (data->num_sensors <= 0) {
> + dev_err(dev, "invalid number of sensors\n");
> + return -EINVAL;
> + }
> +
> + tmdev = devm_kzalloc(dev, sizeof(*tmdev) +
> + data->num_sensors * sizeof(*s), GFP_KERNEL);
> + if (!tmdev)
> + return -ENOMEM;
> +
> + tmdev->dev = dev;
> + tmdev->num_sensors = data->num_sensors;
> + tmdev->ops = data->ops;
> + for (i = 0; i < tmdev->num_sensors; i++) {
> + if (data->hw_ids)
> + tmdev->sensor[i].hw_id = data->hw_ids[i];
> + else
> + tmdev->sensor[i].hw_id = i;
> + }
> +
> + if (!tmdev->ops || !tmdev->ops->init || !tmdev->ops->get_temp)
> + return -EINVAL;
> +
> + ret = tmdev->ops->init(tmdev);
> + if (ret < 0) {
> + dev_err(dev, "tsens init failed\n");
> + return ret;
> + }
> +
> + if (tmdev->ops->calibrate) {
> + ret = tmdev->ops->calibrate(tmdev);
> + if (ret < 0) {
> + dev_err(dev, "tsens calibration failed\n");
> + return ret;
> + }
> + }
> +
> + ret = tsens_register(tmdev);
> +
> + platform_set_drvdata(pdev, tmdev);
> +
> + return ret;
> +}
> +
> +static int tsens_remove(struct platform_device *pdev)
> +{
> + int i;
> + struct tsens_device *tmdev = platform_get_drvdata(pdev);
> + struct thermal_zone_device *tzd;
> +
> + if (tmdev->ops->disable)
> + tmdev->ops->disable(tmdev);
> +
> + for (i = 0; i < tmdev->num_sensors; i++) {
> + tzd = tmdev->sensor[i].tzd;
> + thermal_zone_of_sensor_unregister(&pdev->dev, tzd);
> + }
> +
> + return 0;
> +}
> +
> +static struct platform_driver tsens_driver = {
> + .probe = tsens_probe,
> + .remove = tsens_remove,
> + .driver = {
> + .name = "qcom-tsens",
> + .pm = &tsens_pm_ops,
> + .of_match_table = tsens_table,
> + },
> +};
> +module_platform_driver(tsens_driver);
> +
> +MODULE_LICENSE("GPL v2");
> +MODULE_DESCRIPTION("QCOM Temperature Sensor driver");
> +MODULE_ALIAS("platform:qcom-tsens");
> diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h
> new file mode 100644
> index 0000000..6f652ed
> --- /dev/null
> +++ b/drivers/thermal/qcom/tsens.h
> @@ -0,0 +1,90 @@
> +/*
> + * Copyright (c) 2015, The Linux Foundation. All rights reserved.
> + *
> + * This software is licensed under the terms of the GNU General Public
> + * License version 2, as published by the Free Software Foundation, and
> + * may be copied, distributed, and modified under those terms.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +#ifndef __QCOM_TSENS_H__
> +#define __QCOM_TSENS_H__
> +
> +#define ONE_PT_CALIB 0x1
> +#define ONE_PT_CALIB2 0x2
> +#define TWO_PT_CALIB 0x3
> +
> +struct tsens_device;
> +
> +struct tsens_sensor {
> + struct tsens_device *tmdev;
> + struct thermal_zone_device *tzd;
> + int offset;
> + int id;
> + int hw_id;
> + u32 slope;
> + u32 status;
> +};
> +
> +/**
> + * struct tsens_ops - operations as supported by the tsens device
> + * @init: Function to initialize the tsens device
> + * @calibrate: Function to calibrate the tsens device
> + * @get_temp: Function which returns the temp in millidegC
> + * @enable: Function to enable (clocks/power) tsens device
> + * @disable: Function to disable the tsens device
> + * @suspend: Function to suspend the tsens device
> + * @resume: Function to resume the tsens device
> + * @get_trend: Function to get the thermal/temp trend
> + */
> +struct tsens_ops {
> + /* mandatory callbacks */
> + int (*init)(struct tsens_device *);
> + int (*calibrate)(struct tsens_device *);
> + int (*get_temp)(struct tsens_device *, int, int *);
> + /* optional callbacks */
> + int (*enable)(struct tsens_device *, int);
> + void (*disable)(struct tsens_device *);
> + int (*suspend)(struct tsens_device *);
> + int (*resume)(struct tsens_device *);
> + int (*get_trend)(struct tsens_device *, int, long *);
> +};
> +
> +/**
> + * struct tsens_data - tsens instance specific data
> + * @num_sensors: Max number of sensors supported by platform
> + * @ops: operations the tsens instance supports
> + * @hw_ids: Subset of sensors ids supported by platform, if not the first n
> + */
> +struct tsens_data {
> + const u32 num_sensors;
> + const struct tsens_ops *ops;
> + unsigned int *hw_ids;
> +};
> +
> +/* Registers to be saved/restored across a context loss */
> +struct tsens_context {
> + int threshold;
> + int control;
> +};
> +
> +struct tsens_device {
> + struct device *dev;
> + u32 num_sensors;
> + struct regmap *map;
> + struct regmap_field *status_field;
> + struct tsens_context ctx;
> + bool trdy;
> + const struct tsens_ops *ops;
> + struct tsens_sensor sensor[0];
> +};
> +
> +char *qfprom_read(struct device *, const char *);
> +void compute_intercept_slope(struct tsens_device *, u32 *, u32 *, u32);
> +int init_common(struct tsens_device *);
> +int get_temp_common(struct tsens_device *, int, int *);
> +
> +#endif /* __QCOM_TSENS_H__ */
> --
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
> of Code Aurora Forum, hosted by The Linux Foundation
>
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
