On 19/04/16 20:10, Stephen Boyd wrote:
On 04/12/2016 02:33 AM, Srinivas Kandagatla wrote:This patch adds pmic regulator supplies connected on the board. Rest of the invidual regulators would be added as and when required by the devices. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx> Acked-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx> --- arch/arm/boot/dts/qcom-apq8064-arrow-db600c.dts | 62 +++++++++++++++++++++++++ 1 file changed, 62 insertions(+) diff --git a/arch/arm/boot/dts/qcom-apq8064-arrow-db600c.dts b/arch/arm/boot/dts/qcom-apq8064-arrow-db600c.dts index 57d4500..6695b00 100644 --- a/arch/arm/boot/dts/qcom-apq8064-arrow-db600c.dts +++ b/arch/arm/boot/dts/qcom-apq8064-arrow-db600c.dts @@ -9,7 +9,69 @@ serial1 = &gsbi1_serial; }; + regulators { + compatible = "simple-bus"; + vph: regulator-fixed@1 { + compatible = "regulator-fixed"; + regulator-min-microvolt = <4500000>; + regulator-max-microvolt = <4500000>; + regulator-name = "VPH"; + regulator-type = "voltage"; + regulator-boot-on; + }; + };Just curious why we added the vph supply? Is that for some framework requirement? We haven't done this on other boards, although we probably should if there's a good reason for it.
This is an on board 12V TO 4.5V @5.5A DC/DC convertor for PMIC VPH power. Yep we should do something similar on the other boards too. Without this probably you would notice some error messages from rpm_regulators about missing supply nodes.
thanks, srini
-- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
