Hi Andy, This patchset adds support to DB600c which is based on APQ8064. With this patchset, except spi I was able to test all the below features on this board on top of v4.6-rc3. 1> i2c 2> spi 3> sd/mmc with card detect 4> eMMC 5> USB 6> SATA 7> on board Ethernet based on PCIE. 8> user and activity leds. 9> on board Magnetometer This patchset also has a fix to i2c/spi pinctrls which was not set correctly in my previous apq8064 patches, I have verified this patchset with eeprom and sensors on the board, you might want to take that patch in next rc. Changes since v1: - renamed the dts and compatible strings according to the discussion. - fixed/renamed led labels as suggeste by Rob, Nico and others. - Added Acks for Bjorn - Added Magnetometer support. - Split the pinconfs to seperate file as suggested by Bjorn - Remove activity leds default triggers, as it was not clear which trigger was correct according to 96boards specs. Can be added once we fix that. Thanks, srini Srinivas Kandagatla (13): ARM: dts: apq8064: fix the pinctrls for i2c and spi ARM: dts: apq8064: add support to gsbi1 uart ARM: dts: apq8064: add gsbi7 i2c support ARM: dts: db600c: add board support with serial ARM: dts: db600c: add pmic regulator supplies ARM: dts: db600c: Add eMMC and SD card support ARM: dts: db600c: add usb support ARM: dts: db600c: add pcie support ARM: dts: db600c: add on board sata support. ARM: dts: db600c: Add on board leds support ARM: dts: db600c: add i2c support ARM: dts: db600c: add spi support ARM: dts: db600c: add support to magnetometer arch/arm/boot/dts/Makefile | 1 + .../boot/dts/qcom-apq8064-arrow-db600c-pins.dtsi | 52 +++ arch/arm/boot/dts/qcom-apq8064-arrow-db600c.dts | 349 +++++++++++++++++++++ arch/arm/boot/dts/qcom-apq8064-pins.dtsi | 39 +++ arch/arm/boot/dts/qcom-apq8064.dtsi | 41 ++- 5 files changed, 476 insertions(+), 6 deletions(-) create mode 100644 arch/arm/boot/dts/qcom-apq8064-arrow-db600c-pins.dtsi create mode 100644 arch/arm/boot/dts/qcom-apq8064-arrow-db600c.dts -- 2.5.0 -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
