[PATCH 0/5] drm/panel: atna33xc20: Fix the Samsung ATNA45AF01 panel

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The backlight of the Samsung ATNA45AF01 panel used in the Qualcomm X1E80100
CRD does not work correctly with the current display panel configuration
and drivers: It works after boot, but once the display gets disabled it is
not possible to get it back on. It turns out that the ATNA45AF01 panel
needs exactly the same non-standard power sequence as implemented for
ATNA33XC20 in the panel-samsung-atna33xc20 driver.

Move the ATNA45AF01 panel from the generic panel-edp driver to the
panel-samsung-atna33xc20 driver and fix the panel configuration in the
x1e80100-crd device tree to make the panel work correctly.

The DT changes are included here for reference and easier testing, I assume
Bjorn or Konrad will pick them up after the DRM panel changes were applied.

Signed-off-by: Stephan Gerhold <stephan.gerhold@xxxxxxxxxx>
---
Stephan Gerhold (5):
      dt-bindings: display: panel: samsung,atna33xc20: Document ATNA45AF01
      drm/panel: samsung-atna33xc20: Add compatible for ATNA45AF01
      Revert "drm/panel-edp: Add SDC ATNA45AF01"
      arm64: dts: qcom: x1e80100-crd: Fix backlight
      arm64: defconfig: Add CONFIG_DRM_PANEL_SAMSUNG_ATNA33XC20

 .../bindings/display/panel/samsung,atna33xc20.yaml      |  6 +++++-
 arch/arm64/boot/dts/qcom/x1e80100-crd.dts               | 17 +++++++++++++++--
 arch/arm64/configs/defconfig                            |  1 +
 drivers/gpu/drm/panel/panel-edp.c                       |  2 --
 drivers/gpu/drm/panel/panel-samsung-atna33xc20.c        |  1 +
 5 files changed, 22 insertions(+), 5 deletions(-)
---
base-commit: 523b23f0bee3014a7a752c9bb9f5c54f0eddae88
change-id: 20240710-x1e80100-crd-backlight-632f9bf936ef

Best regards,
-- 
Stephan Gerhold <stephan.gerhold@xxxxxxxxxx>





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux